Quote:
Originally Posted by krikke
As far as I can tell this is a universal double DIN size unit (178 L x 167 W x 100 H)... what makes this a 'Toyota fitment' as you stated before?  |
Only going from what others have said about the "universal" fitments requiring alterations to bezel or head unit and the DIYs posted of alterations to mounting kits required. This requires no modifications whatsoever if you have a Toyota double DIN stock unit installed already.
The T7019A takes the stock mounts off the side of the stock head unit. Uses the same exact screw holes and then slots in to exactly fit the four corner mounting threads.
Specifies on the headline listing that it is a Toyota fitment and I am simply advising that indeed it is. Others say "universal" and this one says "Toyota universal" so am just assuming it fits better from others experiences.
I can confirm the stock unit (that the T7019A mimics) is 150L x 175W x 88H so I'd say the measurements in the specs on the listing are cut and paste and not actual. The measurements I have done are of the box rather than the face - I assume that's where the measurements are from. Faceplate is 210W x 104H
Also starts up with a big Toyota symbol which is a nice touch.
http://www.tradesolution.hk/e/ptxweb...duct/1274.html