Quote:
Originally Posted by MaverickMonk
I too had high silicon (94) and Iron (24), and I was also told this was normal. Silicon in the oil isn't what causes problems post recall. Chunks of silicon breaking off causes the failure. Silicon trace in the oil is from offgassing, which will occur any time new silicon is used.
I think we're gonna be ok man.
https://imgur.com/a/EveNAmj |
Thank you; Blackstone just emailed to thank me because they were not aware of the recall issues. They said the same as you and others on here as to the cause. (this is a great board for info!)
They did recommend, however, I should do another one to check for bearing wear, which may be a sign of trouble.