Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Top Speed Auto Pro-1 Axle-Back Exhaust Review

Bobblehead · 06-15-2014, 06:24 PM

I figure I should give an update since I feel I've come to a problem.

My exhaust seems to rattle at about 1.5-2k RPM. I went to check it out and see if something was rubbing and no dice.

I remembered seeing @ck-GT86 's post (#71) about the front pipe. So I ramped up the front of my car and that was it. Turns out the exhaust may have been in a bind since I installed the new muffler.

I made sure everything was kosher and managed to tighten up the axleback bolts just a bit.

So let this be a reminder to anyone who installs this: You might want to loosen up the front pipe bolt before you tighten everything down.

06-15-2014, 06:24 PM	#110
Bobblehead Senior Member Join Date: Mar 2014 Drives: 2013 BRZ (gone) 2016 Ford Fusion SE Location: Western PA Posts: 602 Thanks: 522 Thanked 494 Times in 223 Posts Mentioned: 1 Post(s) Tagged: 2 Thread(s)	I figure I should give an update since I feel I've come to a problem. My exhaust seems to rattle at about 1.5-2k RPM. I went to check it out and see if something was rubbing and no dice. I remembered seeing @ck-GT86 's post (#71) about the front pipe. So I ramped up the front of my car and that was it. Turns out the exhaust may have been in a bind since I installed the new muffler. I made sure everything was kosher and managed to tighten up the axleback bolts just a bit. So let this be a reminder to anyone who installs this: You might want to loosen up the front pipe bolt before you tighten everything down. __________________