Best shop in Toronto to get an alignment?
 

Anyone know where the best place to get an alignment in Toronto is? Preferably in markham/scarborough.

I second this

http://www.ft86club.com/forums/showthread.php?t=53151

http://www.ft86club.com/forums/showthread.php?t=53695

Scott at can-alignment. well worth the drive, won't find a better place

Also looking into this, how much do they usually go for??

Yup Scott is a wizard!

costed me $325 for corner balance and alignment

Well worth to get both done If your tracking the car

Alignment alone should be about $150ish from Scott. Well worth the drive though. He has a ton of racing experience and can not only set your alignment, but give insight into what specs you'll want.

i got my FRS done at K.S.L auto shop alignment and tire rotation for $80! i highly recommended! he didn't rush at all and took his time!

What are the final specs at each wheel?

I couldn't find a time that worked for me and Can-alignment, so I ended up going to NV Auto in Stoney Creek.

$110 for the alignment, they were able to dial this in pretty quickly (print out is at home):

FRONTS (L/R):
Camber: -2.1/-2.0
Caster: 6.3 (untouched, but my strut tops can adjust)
Toe: 0.02 / 0.0

REAR (L/R):
Camber: -2.0/-2.0
Toe: 0.10 / 0.09

I actually don't have the paperwork he gave me right now but if I have to guess its is like mostly 0 and -1.2? Ish i can't tell you exactly but just top of my head when I was watching the monitor and it's all green!

Ive actually heard good things about this guy Will. I'm thinking about brining my car out to him since it pulls a bit to the left after I installed the springs. Not sure if that's a toe or camber thing (sorry newb).

I got my alignment done at a shop in the Midland/Lawrence area in Scarborough for 80... Caveat: their computer didn't have the brz specs, so we ended up using the WRX as the stand-in... Thankfully all I needed was alignment after installing the camber bolts, so it was just a matter of getting the -1.2 (couldn't get anymore though)