How do I change the front sway bar bushings?
 

To start, really surprised there aren't any tutorial threads about this 10 years into the car's life. I think I've run into more difficulty on this than I expected - I thought this would be a quick 10 minute job but..

I have taken the wheels off and removed the plastic cover near the front sway bar, and notice that I don't have any room to undo the bolts on the sway bar bushings. How do I change out the front sway bar bushings? Do I have to undo the entire sway bar from the subframe as if I were following a tutorial install for an aftermarket sway bar?

How do I change the front sway bar bushings?
 

It’s really easy, you just remove the bracket that holds the sway bar bracket on. It’s 2x2 bolts per side.

http://farm8.staticflickr.com/7297/9...1d50bde0_o.jpg

I replaced the bushings on both sway bars. The rears are a 10 minute job. For the fronts the bar needs to come out of the car entirely, which is quite the pain with all the panels that need to be removed for that, but otherwise fairly simple.

https://www.youtube.com/watch?v=VoF0-OTiojw here is a video of how i did it