EQUAL Length Headers designed for 1st Gen NOT IDEAL for 2nd Gen
 

:burnrubber:

New EQUAL Length Headers are being developed for the 2022 model

Engine Harmonics are different between 1st and 2nd Generation

EQUAL Length Headers designed for 1st Gen are NOT IDEAL for 2nd Gen

They WORSEN the Torque Dip and will most likely hurt tuning potential

Unequal Length Headers ARE compatible between 1st and 2nd Gen

Verified Independently and by some Manufacturers

https://i.postimg.cc/sxzZdSBS/tomei01.png


https://www.youtube.com/watch?v=aNPWNisXC3s&t=365s

Well yah, but to be fair the Tomei EL headers weren't really optimized for the FA20 compared to others available.

without a tune available, why would you want to put headers on anyways?

They can still increase power and address the torque dip. To have optimal gains, a tune is always recommended.

The like tiny 5ftlb one?

15 ft-lb Torque Dip - Stock 2022

Check out all the dyno's

https://www.ft86club.com/forums/showthread.php?t=148862

https://www.ft86club.com/forums/showthread.php?t=148846

https://www.ft86club.com/forums/showthread.php?t=146701

Torque dip is still there.. the first thing I noticed when I first got my 22 BRZ, it's much less noticeable compared the Gen 1 car but getting rid of that dip would definitely improve the fun factor of this car. .cannot wait to see the EL aftermarket offerings and the results with tune when/if it becomes available