Exhaust Tips *UPDATED* pics, info
 

Hi everybody in the forum,

I was wondering what is the Pipe Diameter after you take of the stock exhaust tips off?
I really want to switch out those little ones we have right now. I believe I lot people here also what to know the answer.

Can you give me a few choices which would make is look like euro sepcs? Round, angled, etc. I am a total noob when it comes to exhaust tips :bonk:

Thanks a lot
Eric

*Update*:

Just went to my local Canadian Tire this afternoon for luck and look what I found!!
29.99CAD each + 12%HST:mad0259: = 67.18 dollars well spent
Alignment took a little while, but I want it to look like its stock from the factory.

I would say they don't look too bad, what do you say!
*Special thanks to "Draco-REX", the 2 1/4" pipe diameter is pretty much spot on :thanks:

**More Update**
Since I see some people here in Canada want to know more about the Tips that I brought from Canadian Tire. Here is some information about the Tips.

I think they are not on the Canadian Tire website, I just happen to see them in store, nor are they big brand products(or are they?). However, I am extremely impressed by the quality of the Tips considered their price.

Go to your local store and check them out, since my store carries lots of there products in many different styles. There's a good chance yours carry it too! :thumbup: Just found their website, they are only available in Canadian Tire http://www.dnamufflers.com/Tuned/roundbolton.html

The installation was pretty easy, the 2.25" diameter is a little bigger than the stock pipes, and its a good thing. You can angle the tips for a look that you prefer. There's a lot of room to adjust the lenth, so you can stick it out if you want. But I slide it all the way in to make it look like this which I prefer. You can use the Z thingy came with the furnitures that you get from IKEA to screw the... screws? :D

Hope that helped, if you have more questions let me know!

I was thinking of replacing the tips altogether with larger tips. Maybe sawing the current ones off and have new ones welded on.(professionally of course)

I'm not sure what to do, or where to go.

Put the saws-all down.

Now back away slowly.

Ok.

Relax.

Now click here:
http://www.ft86club.com/forums/showthread.php?t=7275

These are the ones I chose until I can get a full exhaust:
http://www.ft86club.com/forums/showt...909#post233909

If I were to guess on the piping size, maybe 2 1/4"

I believe the tips we have right now are only held in place by a 10mm bolt and can be easily removed! Hope that is good news for you, or you just want to saw something off XD

Here is a link: http://www.ft86club.com/forums/showthread.php?t=7275

Draco-REX you beat me to it!!

The ones you have looks neet. I was wondering if DC Sports makes ones that are a little bigger? Diameter wise.

Yup. The EX-1010 is a 4" angled tip and the EX-1013 is a 4.5" angled tip. All of these are at Advance Auto Parts. Other chains will have different brands and styles.

Hey Ericfrs,

Awesome exhaust tips for your Ultramarine FR-S!

I think they look really good and I want to add them to my FR-S when it is delivered laster this month.

I was searching the Canadian Tire website, and I was wondering, were these the exhaust tips you bought?

http://www.canadiantire.ca/AST/brows....jsp?locale=en

Did it come already sized to fit a 2 1/4" pipe diameter, or did you have to do anything to make it fit properly?

Thanks for the pics!

Nice choice. I like the smoothed lip over the fully rolled lip on the set I have. THey look real good.

Looks great!

Im a big fan of the HKS spec L exhaust tips, that carbon fibre ring. i like it!

how much do you want to send me a pair over to Miami!?

Glad you guys liked it, I like the ring with in a ring look.
Nothing was chopped or modified, just put those boys on!

Thanks for sharing Eric! these tips look exactly like the JDM tips; probably even better because I do really like the ring within a ring look that you mentioned; & they're less than half the cost! Amazing; I plan to do this =D

Koji_Online
Glad you like them! Wish you a speedy DIY :D

Nice find at CDN Tire.

Which dealer did you pickup your FR-S from?
I love the blue colour, it goes with the FR-S bodylines =)

Btw, PM me if you need an HID kit or LEDs for your interior/exterior. I am local and can meet up with you.

Looks Good !!!

check out these tips they are 2.25inlet, outlet diameter range from 3.8 to 4.0

http://www.e90post.com/forums/showthread.php?t=237510

Wow great find at Crappy Tire! I'm sooo digging that! Lol can anyone please confirm that the BRZ's stock tips are equal in diameter with the FR-S? I want a set of these badboys when my car comes in. Many thanks in advance!

Will these fit on our cars?

*facepalm* Because no one's said it yet: the "z thing" is called an Allen wrench, Allen key, or hex key.

Also, those look awesome.

Thanks for the correction！
Thats what I call "Learn something new everyday." :w00t:

Eric

yes I think so

Thanks - bought mine (even before I had the car) and just installed now (and removed the frs badge)

https://dl.dropbox.com/u/64402414/20...2011.50.17.jpg

https://dl.dropbox.com/u/64402414/20...2012.17.34.jpg

https://dl.dropbox.com/u/64402414/20...2012.18.00.jpg

It doesn't stick out as much as it looks. They look excellent until I get a new exhaust.

Very nice! Does anyone know if they come in dual walled?

Maybe, they have lots of parts available from TUNED.
I think I even saw one dual walled in my local CT. They only had one left so I didn't buy it. Go check it out in CT, you might find something interesting. :thumbup:

look good but hell I'm just going to wait and buy an exhaust system.

Lets do a meet sometimes! haha same colour as mine I really didn't think it was going to be a popular colour

I'd love to join you guys on a cruise. That is if you will let a 23 year old MR2 tag along. :thumbup:

Great! I love the color from the start:thumbsup:
If there's a meet here in Vancouver, I am definitely in!

Well, could always use some variety. :happy0180:

All cars are allowed to join in! No hating here we should go sometime soon with all this nice weather we are getting except I'm gone on vacation in 2 weeks haha

See there is tons of time then.

Other exhaust tips option...
 

I just put these on. Got them at the local auto-parts store for $28. Similar shape as the stock ones, but larger. First pic shows the stock vs the new ones. Second pic is after both were installed. I think it is a nice temporary improvement. Sorry for the bad lighting in my garage... :lol:

Looks good! Never would have thought the stock style would look good.
Shame we only get 86mm ones as stock. :cry:

It looks the stock 2015+ ones. Cool!

This thread was last active almost 4 years ago! Haha, I remember I went that route as well when I first picked her up in 2012...

Welcome to the club.

Just got the Canadian tire tips, they look awesome!

Thanks for posting so I would know to look.