Oil Temp with Dash Command app on iPhone and iPad

[nzer]

Posted this on the general discussion forum so sorry for the cross post but want to get Australasia onto this as well.

As many of you will know you cannot currently add the oil temp PID for the twins to Dash Command to get oil temp to show on an iPad or iPhone.

Best option at the moment is to use Torque on an Android. Not good for iOS users.

If you use an iPhone or iPad and want to be able to see oil temp gauge using dash command PLEASE go to the developers Dash Commnd forum and add you voice to the request thread here.

http://www.palmerperformance.com/for...pic=6351.0;all

They are looking at adding Toyota/Subaru specific sets of data but also other makes. The more of us that request either being able to add specific PIDs or a Toyota/Subaru set the more likely we get to the front of the queue for development.

Also a good idea to write an app review of Dash Command and tell them you have voted it down due to no oil temp for the 86 or BRZ.

Let's get the FT86 Club to put the pressure on their development team! 86ers are go!

.