Just came across another minor issue.

[microbionic]

Originally Posted by KPR10

For those of you who have had yours replaced, what is your plan to keep the rust from coming back?

i was thinking of using some clear bra material, to buffer the seal on the trim

[microbionic]

I just got my BRZ back from the dealer, the body shop went with my idea and placed a small amount of clear bra material between the seal and the trim. they also let me keep the old trim pieces in case it happens again out of warranty .. i would just need to refurbish them.

I can take a picture later today when I get home. of what it looks like with the clear bra material

[microbionic]

FYI,

61011CA200
61011CA210

Are the Subaru part#'s of what is replaced.

[KPR10]

Originally Posted by microbionic

I just got my BRZ back from the dealer, the body shop went with my idea and placed a small amount of clear bra material between the seal and the trim. they also let me keep the old trim pieces in case it happens again out of warranty .. i would just need to refurbish them.

I can take a picture later today when I get home. of what it looks like with the clear bra material

Awesome, would love to see those photos. Very interested in getting the same thing done to mine. Although mine are already installed and I would need to get the clear bra added after. It may be more difficult with the seal in the way a bit.

[zc06_kisstherain]

I would just add clear bra myself rather going to stealership to touch my car

[microbionic]

Originally Posted by zc06_kisstherain

I would just add clear bra myself rather going to stealership to touch my car

a body shop did it, and i talked to them before hand. you need to have the seal/trim off to easily attach the material.

[microbionic]

Here is the clear bra material, this is on both driver and passenger trim pieces.

[KPR10]

Awesome, thanks for the picture, that is really helpful. I am going to try and get the same thing done as well.

[microbionic]

the body shop really worked with me on it, they wanted to respect the car.. they did this plus add rust protection to bits inside the doors, at no extra charge to me or the dealership

[t.chk]

subb'd so I remember to check this tomorrow. Damn pesky little things with this car lol

[ricebox]

What if you have that triangle window tinted? Would that mean you would have to get it re-tinted or this piece is separate of the window.

[microbionic]

Originally Posted by ricebox

What if you have that triangle window tinted? Would that mean you would have to get it re-tinted or this piece is separate of the window.

Separate.. You should be ok

Sent from my SAMSUNG-SGH-I717 using Tapatalk

[zc06_kisstherain]

i checked on mine and only driver side has it. arkkkkkkkkkkk!!!!!!
it's minor but still dont want to see this on new car.
I will probably clean it first with Q pick then i am going to try apply peice of clear bra that area without dissembling that metal part

[microbionic]

Originally Posted by microbionic

Separate.. You should be ok

Sent from my SAMSUNG-SGH-I717 using Tapatalk

I take that back... It does look like a new glass piece... There is a sticker on mine...that was not before...new glass yo

Sent from my SAMSUNG-SGH-I717 using Tapatalk