Exhaust tips for Muffler Delete.

[MisterSheep]

I've been looking at exhausts for the past couple of days and to my conclusion. They're expensive. I have decided I am going to go with a muffler delete instead. I looked at the dual tip muffler delete from Berk and $300 for a muffler delete is outrageous! I got a buddy at an muffler shop and said he'd do it for $100 including custom tips. My question is where can i find generic roughly 4 or 4.5 inch tips (to fill the holes in the diffuser because stock is way too damn tiny, they look out of place) for the frs. I tried looking for generic titanium burnt tip exhaust tips and most of them were the cheap-o one you put over your pre-exsisting exhaust tips. I'm looking for something that isn't poor quality, where would i go to find them?

[ZOMFGAARON]

Originally Posted by MisterSheep

I've been looking at exhausts for the past couple of days and to my conclusion. They're expensive. I have decided I am going to go with a muffler delete instead. I looked at the dual tip muffler delete from Berk and $300 for a muffler delete is outrageous! I got a buddy at an muffler shop and said he'd do it for $100 including custom tips. My question is where can i find generic roughly 4 or 4.5 inch tips (to fill the holes in the diffuser because stock is way too damn tiny, they look out of place) for the frs. I tried looking for generic titanium burnt tip exhaust tips and most of them were the cheap-o one you put over your pre-exsisting exhaust tips. I'm looking for something that isn't poor quality, where would i go to find them?

Flowmaster 15395 2.5" x 4.5" Angle Cut Polished Stainless Steel Exhaust Tip https://www.amazon.com/dp/B00CJC1UGU..._eDJ1vbHFB4YTX


Sent from my iPhone using Tapatalk

[jawn]

Not to poop in your thread, but you're self-selecting cheap muffler tips by looking for burnt titanium ones.

Borla, Magnaflow, Flowmaster, etc... all make decent weld-on or clamp-on tips, but you're on your own for burnt titanium.

[MisterSheep]

Originally Posted by ZOMFGAARON

Flowmaster 15395 2.5" x 4.5" Angle Cut Polished Stainless Steel Exhaust Tip https://www.amazon.com/dp/B00CJC1UGU..._eDJ1vbHFB4YTX


Sent from my iPhone using Tapatalk

Originally Posted by jawn

Not to poop in your thread, but you're self-selecting cheap muffler tips by looking for burnt titanium ones.

Borla, Magnaflow, Flowmaster, etc... all make decent weld-on or clamp-on tips, but you're on your own for burnt titanium.

Clicked on this link and this was one of the suggested items.
[ame="http://www.amazon.com/Burnt-Exhaust-Polished-Stainless-Steel/dp/B00PA2F88M/ref=pd_sim_sbs_263_2?ie=UTF8&refRID=1YW2F6PAKTSPK6 5FCGR9"]Amazon.com: Set of 2 Blue Burnt Exhaust Tips Polished Stainless Steel 2.5" In 4" Out: Automotive[/ame]

I think this is exactly what i'm looking for...

[jawn]

Originally Posted by MisterSheep

Clicked on this link and this was one of the suggested items.
Amazon.com: Set of 2 Blue Burnt Exhaust Tips Polished Stainless Steel 2.5" In 4" Out: Automotive

I think this is exactly what i'm looking for...

Cool. You could always burn them yourself, if you're so inclined. I'm not a fan of the look, but it's fairly easy to get stainless steel to change color with a blowtorch.

[DannyQ86]

Muffler shop work and those tips comes to 160, I've seen a few berk muffler delete (dual tip) on Craigslist for that or cheaper, only thing was those are in so cal and your in nor cal.
http://losangeles.craigslist.org/lac...171718591.html
I am in no way affiliated with seller on the link I posted FYI

[MisterSheep]

Originally Posted by DannyQ86

Muffler shop work and those tips comes to 160, I've seen a few berk muffler delete (dual tip) on Craigslist for that or cheaper, only thing was those are in so cal and your in nor cal.
http://losangeles.craigslist.org/lac...171718591.html
I am in no way affiliated with seller on the link I posted FYI

I contacted a guy about his berk muffler delete he's selling and he wants $220 with it used. I'd much rather go my own custom route not only cuz its cheaper but because it'll be a custom exhaust.

[DannyQ86]

To each his own, I was only posting an alternative. Hope your exhaust turns out great, post pics when done!

[MisterSheep]

Originally Posted by DannyQ86

To each his own, I was only posting an alternative. Hope your exhaust turns out great, post pics when done!

Will do! I'm going to talk with him here over the weekend about it. Meeting him at raceworz in Sac with his 06 GTO he has long tube headers and catless exhaust.

[DannyQ86]

The gto is one badass machine. I bet that thing sounds awesome and hauls ass

[MisterSheep]

Originally Posted by DannyQ86

The gto is one badass machine. I bet that thing sounds awesome and hauls ass

Yeah I'll try to get videos of it when it's doing quarter miles and the exhaust competition.

[Nate.]

I have the same tips you're looking at, or at least they look the same.
here's what they look like on the car.

[Moetivegt86]

I bought ARK 2.5 - 4.0 titanium tips and they look great...


Sent from my iPhone using Tapatalk