changing calibration id

[garfull]

how do you change calibration ids? i thought you could do it with a hex editor? can this be done in romraider?

[steve99]

Originally Posted by garfull

how do you change calibration ids? i thought you could do it with a hex editor? can this be done in romraider?

cannot be done with romraider

What flashing device do you have ?

What are you trying to achieve ?

[garfull]

Using oft. Trying to share different e85 maps rather than updating each table for each calibration.

Originally Posted by steve99

cannot be done with romraider

What flashing device do you have ?

What are you trying to achieve ?

[steve99]

Originally Posted by garfull

Using oft. Trying to share different e85 maps rather than updating each table for each calibration.

The OFT map have already been calid "hacked" a 700C map is exactly the same as a 900C A00C A01C except for the calid the 700C map is actually a A01C rom calid hacked to 700C so their is no need to change anything your on the latest rom anyway.

This is why you must use the definitions from the OFT site as the defs have been altered as well to match the calid changed roms. If you use the defs from romraider it will not be good unless your editing the native rom.