Password:JDM rear spoiler question - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Michael Blue · 06-11-2014, 03:23 PM

Hey guys!

Planning out my upcoming build and I'm a bit overwhelmed with the aftermarket support for the aerodynamics for this car.
I'm going with some kind of "BottomLine" type carbon kit, but there are a lot of options.
Cost no object, I love ChargeSpeed's T2 kit.

(Look past the flares and stickers)

http://www.chargespeedusa.com/item/c...f-t2-full-kit/

But then I saw the Password:JDM front chin and rear spoilers, and I love how they both have the side panels on them...

I don't think I'd use the more "flush" Password:JDM side skirts, but the ChargeSpeed T2 skirts should work well with the Password:JDM stuff.
I could even use the ChargeSpeed front and sides with the Password:JDM rear...Tons of options...

Anyways, all that for this; does anyone know if that Password:JDM rear spoiler covers the holes in the trunk left by a factory BRZ Limited spoiler?

Thanks a ton!!

~M

Andreas83 · 06-13-2014, 04:31 PM

I hope so, I have ordered a wing and sideskirts from them.
I already have the front splitter.
But looking I am convinced it will, the car on the photo is also pictured with a stock wing.

Here is another thread that I posted in.
http://www.ft86club.com/forums/showthread.php?t=64892

Michael Blue · 06-13-2014, 04:44 PM

Quote:

Originally Posted by Andreas83

I hope so, I have ordered a wing and sideskirts from them.
I already have the front splitter.
...

THANK YOU!

Please feel free to post here when it comes and you get a chance to install it.
I'm wondering if they intentionally covered them, and possibly used them as mounting points for their own.

Thanks!

Andreas83 · 06-13-2014, 05:20 PM

I can post some pics when I recive the parts and install them.
The front splitter corners had threaded holes molded in.
Hopfully the wing also is a bolt on affair.

Liselotte · 06-14-2014, 01:13 AM

you talking about this wing right?

Michael Blue · 06-14-2014, 09:01 AM

Quote:

Originally Posted by Liselotte

you talking about this wing right?

No, this one...

Liselotte · 06-14-2014, 10:12 AM

I meant to quote Andrea. He said he bought a wing, thought hes talking about the wing i posted since its not out yet.

Andreas83 · 06-14-2014, 11:43 AM

Quote:

Originally Posted by Liselotte

you talking about this wing right?

Not that wing, the other wing that is pictured in this thread.

khan · 09-03-2014, 02:00 PM

Quote:

Originally Posted by Andreas83

I can post some pics when I recive the parts and install them.
The front splitter corners had threaded holes molded in.
Hopfully the wing also is a bolt on affair.

Do you have pictures of the wing installed?

scottxnizzle · 06-29-2015, 11:48 AM

So do they cover the stock holes? lol Someone post pics of theirs!!

khan · 06-29-2015, 12:36 PM

Quote:

Originally Posted by scottxnizzle

So do they cover the stock holes? lol Someone post pics of theirs!!

@Andreas83 Did you get yours? Installed?

Andreas83 · 06-30-2015, 04:44 AM

Quote:

Originally Posted by khan

@Andreas83 Did you get yours? Installed?

It covers all the holes, bolt on part.
I cant find any pictures of it...
The motor spun a rod bearing days after installing it...
I will post a pic when I get back onshore.

scottxnizzle · 06-30-2015, 12:22 PM

Quote:

Originally Posted by Andreas83

It covers all the holes, bolt on part.
I cant find any pictures of it...
The motor spun a rod bearing days after installing it...
I will post a pic when I get back onshore.

so its bolt on? did you reuse any of the stock holes??

Andreas83 · 06-30-2015, 12:39 PM

Quote:

Originally Posted by scottxnizzle

so its bolt on? did you reuse any of the stock holes??

Yes. reused some of the existing holes.
Not all of them if I remember correctly.

06-11-2014, 03:23 PM	#1
Michael Blue Member Join Date: May 2014 Drives: 1998 Audi A4 Quattro Sport 30v Location: Central IL, USA Posts: 72 Thanks: 27 Thanked 10 Times in 8 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Password:JDM rear spoiler question Hey guys! Planning out my upcoming build and I'm a bit overwhelmed with the aftermarket support for the aerodynamics for this car. I'm going with some kind of "BottomLine" type carbon kit, but there are a lot of options. Cost no object, I love ChargeSpeed's T2 kit. (Look past the flares and stickers) http://www.chargespeedusa.com/item/c...f-t2-full-kit/ But then I saw the Password:JDM front chin and rear spoilers, and I love how they both have the side panels on them... I don't think I'd use the more "flush" Password:JDM side skirts, but the ChargeSpeed T2 skirts should work well with the Password:JDM stuff. I could even use the ChargeSpeed front and sides with the Password:JDM rear...Tons of options... Anyways, all that for this; does anyone know if that Password:JDM rear spoiler covers the holes in the trunk left by a factory BRZ Limited spoiler? Thanks a ton!! ~M __________________ Browncoat Society "Firefly"/"Serenity" Facebook Group Project StormTrooper BRZ Ltd Coming Soon!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Password Carbon Rear Deck Type II	JPxM0Dz	Canada Classifieds	5	11-28-2015 10:05 PM
Password:JDM Dry Carbon Fiber Rear Deck Shelf Subaru BRZ / Scion FR-S (Type I/ II)	password:jdm	Interior Parts (Incl. Lighting)	124	01-28-2015 04:17 PM
Password:JDM Front/Rear Performance Brake Rotors 13+ Subaru BRZ	password:jdm	Brakes, Suspension, Chassis	63	09-22-2014 04:32 PM
New rear spoiler choice: Carsmo rear spoiler	Ray@Carsmo	Cosmetic Modification (Interior/Exterior/Lighting)	46	08-10-2012 03:20 AM

06-13-2014, 04:31 PM	#2
Andreas83 Senior Member Join Date: Oct 2013 Drives: 2013 Subaru BRZ Location: Norway Posts: 111 Thanks: 29 Thanked 85 Times in 46 Posts Mentioned: 3 Post(s) Tagged: 1 Thread(s)	I hope so, I have ordered a wing and sideskirts from them. I already have the front splitter. But looking I am convinced it will, the car on the photo is also pictured with a stock wing. Here is another thread that I posted in. http://www.ft86club.com/forums/showthread.php?t=64892

06-13-2014, 05:20 PM	#4
Andreas83 Senior Member Join Date: Oct 2013 Drives: 2013 Subaru BRZ Location: Norway Posts: 111 Thanks: 29 Thanked 85 Times in 46 Posts Mentioned: 3 Post(s) Tagged: 1 Thread(s)	I can post some pics when I recive the parts and install them. The front splitter corners had threaded holes molded in. Hopfully the wing also is a bolt on affair.

06-14-2014, 01:13 AM	#5
Liselotte Member Join Date: Dec 2013 Drives: Scion FR-S (2013) Location: Maryland, US of A Posts: 50 Thanks: 18 Thanked 14 Times in 9 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	you talking about this wing right?

06-14-2014, 10:12 AM	#7
Liselotte Member Join Date: Dec 2013 Drives: Scion FR-S (2013) Location: Maryland, US of A Posts: 50 Thanks: 18 Thanked 14 Times in 9 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	I meant to quote Andrea. He said he bought a wing, thought hes talking about the wing i posted since its not out yet.

06-29-2015, 11:48 AM	#10
scottxnizzle Senior Member Join Date: Mar 2014 Drives: WRB BRZ Location: Oxnard, CA Posts: 427 Thanks: 151 Thanked 104 Times in 76 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	So do they cover the stock holes? lol Someone post pics of theirs!!

User Name		Remember Me?
Password