Here are your Rocketbunny instructions! - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Maverick22 · 02-15-2014, 04:29 PM

I received one set of the Rocketbunny fenders from Greddy yesterday, But the box lacked instructions. The install is pretty straight forward, but I want to make sure I cut the fenders correctly. I emailed FT86speedfactory and Greddy about damage to the fenders, and the lack of instructions but I am sure I am not the only person who is missing them.

much apreciated! Thanks in advance

Update 1MAR14

I located a PDF from Greddy with the instructions, Unfortunately they are in Japanese but they do have diagrams!

Link; http://www.greddy.com/upload/file/ro...y_frs_ver1.pdf

and photos from user Khan

Link; http://www.ft86club.com/forums/showp...&postcount=101

Thank this post if you use them or plan to as I would like to get an idea of how many people used/ Needed them.

Yamajee · 02-16-2014, 07:07 AM

Quote:

Originally Posted by Maverick22

I received one set of the Rocketbunny fenders from Greddy yesterday, But the box lacked instructions. The install is pretty straight forward, but I want to make sure I cut the fenders correctly. I emailed FT86speedfactory and Greddy about damage to the fenders, and the lack of instructions but I am sure I am not the only person who is missing them.

If you have a copy, scan them in and either upload them, or pm me and I can shoot you my email! It would be much apreciated! Thanks in advance

I would even be willing to paypal someone 10.00 if they could email me a copy!

My kit is arriving in a couple of days, if I get the instructions I'll scan them and upload it.

If not then I'm relying on pictures and the garage that's experienced with widebody kits that I'm taking it to, to get it done right.

THA STI GUY · 02-16-2014, 02:08 PM

Check out my build thread i just posted picture of how i cut my fenders it pretty easy.

Maverick22 · 02-16-2014, 09:00 PM

Quote:

Originally Posted by Yamajee

My kit is arriving in a couple of days, if I get the instructions I'll scan them and upload it.

If not then I'm relying on pictures and the garage that's experienced with widebody kits that I'm taking it to, to get it done right.

Thanks in advance man!

I am dropping my fenders off for paint after i test fit/ pree drill them and just want to make sure i have something to look at other than pictures from the internet.

Maverick22 · 02-17-2014, 11:37 AM

Bump

n2oinferno · 02-17-2014, 12:17 PM

Step 1. Cut fender
Step 2. Have mini heart attack
Step 3. Enjoy rocket bunny

Sorry I'm not much help here.

Yamajee · 02-17-2014, 02:40 PM

Got the kit earlier than I thought, no instructions. Just the kit and the hardware (rivets). THA STI GUY's build seemed to show that it's pretty easy once you've sorted out the wheels setup you're going to run.

THA STI GUY · 02-18-2014, 01:35 AM

Since i got my car ive been gathering picture of other peoples rocket bunny build and i have a nice little folder full of photos and just went off a combination of them all of how they cut thiers.

Yamajee · 02-18-2014, 07:01 AM

Quote:

Originally Posted by THA STI GUY

Since i got my car ive been gathering picture of other peoples rocket bunny build and i have a nice little folder full of photos and just went off a combination of them all of how they cut thiers.

Exactly what I am planning to do. But, if you pay close attention, most of them have differences in the cutting/trimming which makes it a bit harder.

SmsAlSuwaidi · 02-18-2014, 04:55 PM

Quote:

Originally Posted by Yamajee

Got the kit earlier than I thought, no instructions. Just the kit and the hardware (rivets). THA STI GUY's build seemed to show that it's pretty easy once you've sorted out the wheels setup you're going to run.

How long did it take ?

Sent from my IBrick

THA STI GUY · 02-19-2014, 12:10 AM

took about 9 weeks to get my kit but i only ordered the over fenders not the full kit

Yamajee · 02-19-2014, 07:10 AM

Quote:

Originally Posted by SmsAlSuwaidi

How long did it take ?

Sent from my IBrick

about 8-9 weeks.

Maverick22 · 02-19-2014, 10:26 PM

I received my rear fenders after 3 weeks but front fenders are mia

86TruenoFRS · 02-20-2014, 07:14 AM

Quote:

Originally Posted by Yamajee

Got the kit earlier than I thought, no instructions. Just the kit and the hardware (rivets). THA STI GUY's build seemed to show that it's pretty easy once you've sorted out the wheels setup you're going to run.

You got rivets in yours? I only got some bolts and self tapping screws...

02-16-2014, 02:08 PM	#3
THA STI GUY DRIFT BUILD Join Date: Mar 2013 Drives: 2013 FRS Location: Rapid City, South Dakota Posts: 195 Thanks: 4 Thanked 68 Times in 42 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Check out my build thread i just posted picture of how i cut my fenders it pretty easy. __________________ 2013 FRS Rocket bunny- PETE

02-18-2014, 01:35 AM	#8
THA STI GUY DRIFT BUILD Join Date: Mar 2013 Drives: 2013 FRS Location: Rapid City, South Dakota Posts: 195 Thanks: 4 Thanked 68 Times in 42 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Since i got my car ive been gathering picture of other peoples rocket bunny build and i have a nice little folder full of photos and just went off a combination of them all of how they cut thiers. __________________ 2013 FRS Rocket bunny- PETE

02-19-2014, 12:10 AM	#11
THA STI GUY DRIFT BUILD Join Date: Mar 2013 Drives: 2013 FRS Location: Rapid City, South Dakota Posts: 195 Thanks: 4 Thanked 68 Times in 42 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	took about 9 weeks to get my kit but i only ordered the over fenders not the full kit __________________ 2013 FRS Rocket bunny- PETE

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Modellista Antenna Instructions	Pvt AJ	DIY (Do-It-Yourself) Guides	22	06-16-2014 10:06 PM
To Rocketbunny or not to Rocketbunny?	Billylammerkins	Scion FR-S / Toyota 86 GT86 General Forum	105	03-27-2014 02:13 AM
Anybody with a Rocketbunny kit?	Billylammerkins	Northwest	11	01-30-2014 03:47 PM
Instructions to install OEM mudguards?	eddieEndo	DIY (Do-It-Yourself) Guides	7	02-13-2013 05:18 PM
Instructions for dash disassembly	whataboutbob	Cosmetic Modification (Interior/Exterior/Lighting)	3	07-01-2012 08:03 PM

02-17-2014, 12:17 PM	#6
n2oinferno Praise Helix! Join Date: Jan 2011 Drives: Accord 2.0T, Silverado Location: Upstate SC Posts: 2,859 Thanks: 428 Thanked 2,208 Times in 1,072 Posts Mentioned: 11 Post(s) Tagged: 1 Thread(s)	Step 1. Cut fender Step 2. Have mini heart attack Step 3. Enjoy rocket bunny Sorry I'm not much help here.

02-17-2014, 02:40 PM	#7
Yamajee Senior Member Join Date: May 2013 Drives: Rocket Bunny'd GT86 Location: Dubai Posts: 556 Thanks: 68 Thanked 144 Times in 100 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Got the kit earlier than I thought, no instructions. Just the kit and the hardware (rivets). THA STI GUY's build seemed to show that it's pretty easy once you've sorted out the wheels setup you're going to run.

User Name		Remember Me?
Password