FS: Work Meister S1 3P 18x10 +31 5x100 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

BrendanTheGreat408 · 10-20-2013, 12:50 AM

Hello guys, it is time to officially try and part ways with my wheels. Winter is here so they are finally off the car and I will put a real effort into selling these. I ordered them straight from Work Wheels USA and waited a little under 3 months to get them.

SOLD

These are the only set ever made for the Subaru community.

18x10 +31 (R Disk, Clears all BBK)
-Matte Black Face
-Black Anodized Barrels
-Gold Rivets

Condition:
9/10 Condition, as you can see in the pictures 1 of the wheels has a very minor bit of rash about the size of the valve-stem cap. This happened during alignment when some retard ran it into something, not sure what. Sure as hell wasn't me though lol. There is also a little scratch inside where the lugs go, not sure how it happened but it looks reparable with the right buffer. Its not deep and doesn't appear to cut the metal at all.

Fitment:
These are perfect fitment for static 08+ WRX and very conservative fitment for 11+. These would also fit nicely on the GD platform with a little stretch and a tad bit more camber. On 11+ you could easily run a 255/35 tire or even a 265/35 tire. I ran a 245/35 tire and I am on bags and only had -1.4 degrees of camber in the rear at ride height.

Reason for selling:
In short, I get bored and like to change things up.

Notes:
These wheels get lots of attention. In my humble opinion for bags it would look better with 10mm more of offset however when I ordered these I planned on being static, hence the +31 offset to be good for daily driving. These would look killer on a GD with some camber, I really hope a GD owner buys them to be honest lol.

Thanks for shopping.

I took some pictures both in the sun and in shade to but pictures really don't do the black faces and barrels justice since its so damn hard to capture the true colors of the wheels. I feel the pictures in the share most accurately reflect the colors. The sun seem wayyyy to dark....

Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr

Bagged Subaru WRX On Meister S1 | Flickr - Photo Sharing!, on Flickr

Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr

Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr

More pictures found here:
Work Meister S1 3P For Sale - a set on Flickr

B2FiNiTY · 10-20-2013, 01:12 AM

beautiful

PradiG · 10-20-2013, 01:26 AM

Quote:

Originally Posted by BrendanTheGreat408

Hello guys, it is time to officially try and part ways with my wheels. Winter is here so they are finally off the car and I will put a real effort into selling these. I ordered them straight from Work Wheels USA and waited a little under 3 months to get them.

Price: $3700 OBO NO TIRES NO LOW BALLS
Contact: (408) 722-6569

These are the only set ever made for the Subaru community.

18x10 +31 (R Disk, Clears all BBK)
-Matte Black Face
-Black Anodized Barrels
-Gold Rivets

Condition:
9/10 Condition, as you can see in the pictures 1 of the wheels has a very minor bit of rash about the size of the valve-stem cap. This happened during alignment when some retard ran it into something, not sure what. Sure as hell wasn't me though lol. There is also a little scratch inside where the lugs go, not sure how it happened but it looks reparable with the right buffer. Its not deep and doesn't appear to cut the metal at all.

Fitment:
These are perfect fitment for static 08+ WRX and very conservative fitment for 11+. These would also fit nicely on the GD platform with a little stretch and a tad bit more camber. On 11+ you could easily run a 255/35 tire or even a 265/35 tire. I ran a 245/35 tire and I am on bags and only had -1.4 degrees of camber in the rear at ride height.

Reason for selling:
In short, I get bored and like to change things up.

Notes:
These wheels get lots of attention. In my humble opinion for bags it would look better with 10mm more of offset however when I ordered these I planned on being static, hence the +31 offset to be good for daily driving. These would look killer on a GD with some camber, I really hope a GD owner buys them to be honest lol.

Thanks for shopping.

I took some pictures both in the sun and in shade to but pictures really don't do the black faces and barrels justice since its so damn hard to capture the true colors of the wheels. I feel the pictures in the share most accurately reflect the colors. The sun seem wayyyy to dark....

Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr

Bagged Subaru WRX On Meister S1 | Flickr - Photo Sharing!, on Flickr

Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr

Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr

More pictures found here:
Work Meister S1 3P For Sale - a set on Flickr

I would sell my Meisters for these but I don't think anyone would buy mine for a good price :/ lol

Frs123 · 10-21-2013, 10:07 PM

How much you want for your minster? PradiG

PradiG · 10-22-2013, 01:40 AM

Quote:

Originally Posted by Frs123

How much you want for your minster? PradiG

Wasn't planning on selling mine unless someone gave me a stupid good price, which i doubt

Anyways, bump for fellow Meister owner Brendan! I might hit you up about some airlift stuff in the future lol

Frs123 · 10-22-2013, 12:15 PM

Post them for sale with some info maybe someone will take them off your hand.

Beyer Subaru · 10-22-2013, 02:08 PM

Can't stop drooooooooling. Uggggh. These are so sex.

BrendanTheGreat408 · 10-27-2013, 05:01 PM

bumppppp

hanabie · 10-27-2013, 06:19 PM

omg.... yeah they are indeed sex.

SmsAlSuwaidi · 10-27-2013, 06:25 PM

must resist

BrendanTheGreat408 · 10-30-2013, 05:21 PM

must not resist^

aLaFleur · 11-02-2013, 11:36 AM

Would you at all be interested in trades for a stretched swapped Honda Ruckus?

BrendanTheGreat408 · 11-09-2013, 11:59 PM

bumpppp

BrendanTheGreat408 · 11-12-2013, 02:54 AM

bumppppp

10-20-2013, 12:50 AM	#1
BrendanTheGreat408 Member Join Date: May 2013 Drives: 2011 WRX Location: Morgan Hill, CA Posts: 50 Thanks: 0 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	FS: Work Meister S1 3P 18x10 +31 5x100 Hello guys, it is time to officially try and part ways with my wheels. Winter is here so they are finally off the car and I will put a real effort into selling these. I ordered them straight from Work Wheels USA and waited a little under 3 months to get them. SOLD These are the only set ever made for the Subaru community. 18x10 +31 (R Disk, Clears all BBK) -Matte Black Face -Black Anodized Barrels -Gold Rivets Condition: 9/10 Condition, as you can see in the pictures 1 of the wheels has a very minor bit of rash about the size of the valve-stem cap. This happened during alignment when some retard ran it into something, not sure what. Sure as hell wasn't me though lol. There is also a little scratch inside where the lugs go, not sure how it happened but it looks reparable with the right buffer. Its not deep and doesn't appear to cut the metal at all. Fitment: These are perfect fitment for static 08+ WRX and very conservative fitment for 11+. These would also fit nicely on the GD platform with a little stretch and a tad bit more camber. On 11+ you could easily run a 255/35 tire or even a 265/35 tire. I ran a 245/35 tire and I am on bags and only had -1.4 degrees of camber in the rear at ride height. Reason for selling: In short, I get bored and like to change things up. Notes: These wheels get lots of attention. In my humble opinion for bags it would look better with 10mm more of offset however when I ordered these I planned on being static, hence the +31 offset to be good for daily driving. These would look killer on a GD with some camber, I really hope a GD owner buys them to be honest lol. Thanks for shopping. I took some pictures both in the sun and in shade to but pictures really don't do the black faces and barrels justice since its so damn hard to capture the true colors of the wheels. I feel the pictures in the share most accurately reflect the colors. The sun seem wayyyy to dark.... Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets \| Flickr - Photo Sharing!, on Flickr Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets \| Flickr - Photo Sharing!, on Flickr Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets \| Flickr - Photo Sharing!, on Flickr Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets \| Flickr - Photo Sharing!, on Flickr Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets \| Flickr - Photo Sharing!, on Flickr Bagged Subaru WRX On Meister S1 \| Flickr - Photo Sharing!, on Flickr Bagged Subaru WRX On Meister S1 \| Flickr - Photo Sharing!, on Flickr Bagged Subaru WRX On Meister S1 \| Flickr - Photo Sharing!, on Flickr Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets \| Flickr - Photo Sharing!, on Flickr Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets \| Flickr - Photo Sharing!, on Flickr More pictures found here: Work Meister S1 3P For Sale - a set on Flickr Last edited by BrendanTheGreat408; 12-05-2013 at 11:19 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Work Meister S1 3P 5x100 18x10	BrendanTheGreat408	Wheels and Tires	24	10-08-2013 04:51 AM
WORK Emotion XD9 - 18x10 +38mm 5x100 -- Limited Edition Matte Blue	RavSpec	Wheels and Tires	39	09-02-2013 05:34 PM
work vs-xx 18x9.5 +7 front with 215/40 18x10 +13 rear with 225/40 5x100	subyracer05	Wheels and Tires	66	08-07-2013 01:05 PM
WORK Emotion XD9 - 18x10 +38mm 5x100 -- Limited Edition Matte Blue	RavSpec	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	2	06-24-2013 09:40 PM
Group Buy Wheels - WORK/WEDS/RAYS - 17x9, 18x9.5, 18x10 5x100 Fitments	RavSpec	Groupbuys	22	05-12-2013 03:48 AM

10-20-2013, 01:12 AM	#2
B2FiNiTY JDM JUNKY Join Date: Aug 2013 Drives: NSX Location: United States Posts: 387 Thanks: 50 Thanked 101 Times in 73 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	beautiful

10-21-2013, 10:07 PM	#4
Frs123 Senior Member Join Date: Jul 2013 Drives: Raven Location: Naples, Florida Posts: 100 Thanks: 51 Thanked 37 Times in 17 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	How much you want for your minster? PradiG

10-22-2013, 12:15 PM	#6
Frs123 Senior Member Join Date: Jul 2013 Drives: Raven Location: Naples, Florida Posts: 100 Thanks: 51 Thanked 37 Times in 17 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Post them for sale with some info maybe someone will take them off your hand.

10-22-2013, 02:08 PM	#7
Beyer Subaru Senior Member Join Date: Sep 2012 Drives: 2013 BRZ SWP 6AT Ltd Location: Alexandria, VA. Posts: 1,607 Thanks: 859 Thanked 776 Times in 485 Posts Mentioned: 37 Post(s) Tagged: 1 Thread(s)	Can't stop drooooooooling. Uggggh. These are so sex.

10-27-2013, 05:01 PM	#8
BrendanTheGreat408 Member Join Date: May 2013 Drives: 2011 WRX Location: Morgan Hill, CA Posts: 50 Thanks: 0 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	bumppppp

10-27-2013, 06:19 PM	#9
hanabie Senior Member Join Date: Feb 2012 Drives: WRB LMTD '13 Location: Phillips Ranch Posts: 1,246 Thanks: 184 Thanked 242 Times in 158 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	omg.... yeah they are indeed sex.

10-27-2013, 06:25 PM	#10
SmsAlSuwaidi Boosted Join Date: Feb 2013 Drives: Not a supra....yet Location: Riverside,CA/ Abu Dhabi,UAE Posts: 2,925 Thanks: 487 Thanked 1,203 Times in 812 Posts Mentioned: 90 Post(s) Tagged: 2 Thread(s)	must resist

10-30-2013, 05:21 PM	#11
BrendanTheGreat408 Member Join Date: May 2013 Drives: 2011 WRX Location: Morgan Hill, CA Posts: 50 Thanks: 0 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	must not resist^

11-02-2013, 11:36 AM	#12
aLaFleur Senior Member Join Date: Aug 2013 Drives: 2013 FR-S Location: Conyers GA Posts: 147 Thanks: 1 Thanked 71 Times in 45 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Would you at all be interested in trades for a stretched swapped Honda Ruckus?

11-09-2013, 11:59 PM	#13
BrendanTheGreat408 Member Join Date: May 2013 Drives: 2011 WRX Location: Morgan Hill, CA Posts: 50 Thanks: 0 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	bumpppp

User Name		Remember Me?
Password

11-12-2013, 02:54 AM	#14
BrendanTheGreat408 Member Join Date: May 2013 Drives: 2011 WRX Location: Morgan Hill, CA Posts: 50 Thanks: 0 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	bumppppp