Help: Overpipe back--replace which exhaust gaskets? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

OnTheFence · 09-28-2013, 12:42 PM

I received my 2.5" over pipe-back from Nameless (well, the rear mid-pipe remains stock) and was thinking about installing it today, but I hadn't given any consideration to which gaskets from the header, back, that need to be replaced, and none were included with the order (which seems common from others users who purchased the 2.5" set.) I spent a while searching online last night and came up with the following, and wonder if anyone can clarify/confirm:

44011AG000 (Subaru) - Gasket between Header and stock over pipe, #4 in the picture (replace or reuse?)
44022AA123 - donut between front mid-pipe (which will be Nameless) and rear mid-pipe, (which stays OEM), #6 in picture, can be reused
44022AA131 - Gasket between rear mid-pipe and muffler, #13 in picture (Catalog says not reusable, must replace, but I think this thread--specifically Page 53-54--includes comments stating the gasket can be reused for the 2.5" muffler.

Any quick feedback would be much appreciated, thanks.

EvilBeaverFace · 09-28-2013, 01:18 PM

I reused all of mine no problems. I got a OP/FP combo though so I didn't have to worry about the one between the op and the FP of course.

And for #13 I didn't do my muffler so I didn't touch it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TRD exhaust + front pipe and overpipe?	FRSBRZGT86FAN	Engine, Exhaust, Transmission	2	11-02-2020 08:48 AM
TGS\| AVO \|Buddy Club \|HKS\|Apexi\|Tanabe\|AFE\| Magnaflow \| Perrin\| Invidia\| EXHAUST !!	TopGearSolutions	Engine, Exhaust, Bolt-Ons	158	04-14-2014 09:14 PM
Motiv Concepts Overpipe + HFC, Overpipe + Test Pipe Specials!	MotivConcepts	Engine, Exhaust, Bolt-Ons	96	07-19-2013 03:03 AM
Exhaust header / manifold gaskets (Subaru part number)	ft_sjo	Engine, Exhaust, Transmission	1	07-15-2013 10:24 AM
Selling stock overpipe, midpipe, and exhaust for anyone interested	markmatley	Hawaii	0	02-20-2013 10:37 PM

09-28-2013, 12:42 PM	#1
OnTheFence Member Join Date: May 2013 Drives: 2013 BRZ Limited Location: Michigan Posts: 28 Thanks: 1 Thanked 3 Times in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Help: Overpipe back--replace which exhaust gaskets? I received my 2.5" over pipe-back from Nameless (well, the rear mid-pipe remains stock) and was thinking about installing it today, but I hadn't given any consideration to which gaskets from the header, back, that need to be replaced, and none were included with the order (which seems common from others users who purchased the 2.5" set.) I spent a while searching online last night and came up with the following, and wonder if anyone can clarify/confirm: 44011AG000 (Subaru) - Gasket between Header and stock over pipe, #4 in the picture (replace or reuse?) 44022AA123 - donut between front mid-pipe (which will be Nameless) and rear mid-pipe, (which stays OEM), #6 in picture, can be reused 44022AA131 - Gasket between rear mid-pipe and muffler, #13 in picture (Catalog says not reusable, must replace, but I think this thread--specifically Page 53-54--includes comments stating the gasket can be reused for the 2.5" muffler. Any quick feedback would be much appreciated, thanks. Last edited by OnTheFence; 09-28-2013 at 12:55 PM.

User Name		Remember Me?
Password