wr blue premium build thread

[three3y3wrbbrz]

List of mods to do. (All suspension mods)
these are parts I already have

cusco front and rear strut towers
cusco front upper arms
cusco front member
cusco rear lateral links
cusco rear side member
whiteline active possi kit (gear box transmission and rear subframe inserts)
tein street flex coilovers with edfc

waiting on special edition gun metal weds tc105
18x8.5 square set up on sumitomo tires 235 40 zr 18.


today I installed the whiteline possi kit and the front upper arms a front member braces ...all in all the work was done in an hr and the guys at ams tuning in gaithersburg md were very helpful and soon as i drop off the car they already had the upper arms. Great worj and service highly recomended if your licated anywhere in the dmv might even be worth an hr drive for what you get.

after I get my wheels mounted and ballanced i will go back to ams for the coilover install and corner ballancing.

heres some pics of my car bone stock and the underbody with the cusco braces on.

[three3y3wrbbrz]

[three3y3wrbbrz]

As a result of these mods totaling around 520

I can say this feels as though this is how the car shouldve been stock...first thing i felt was how intact the rear felt not that loose squishy resposiveness.
the front feels more stable and the shifting feels more direct.

im waiting to do the rest of my suspenssion.
Once i get the work done i will update with pics reviews and specs.

[schtebie]

Originally Posted by three3y3wrbbrz

As a result of these mods totaling around 520

I can say this feels as though this is how the car shouldve been stock...first thing i felt was how intact the rear felt not that loose squishy resposiveness.
the front feels more stable and the shifting feels more direct.

im waiting to do the rest of my suspenssion.
Once i get the work done i will uodate pics reviews and specs.

Were you able to put the fiberboard shield back on after installing the Front Member brace?? I left mine off..

[three3y3wrbbrz]

Ya i asked for it to be replaced....it should fit right back in place