where are you mounting your plates???

[poormans_LFA]

I don't know that you can keep the manufacture from drilling the holes in front bumper. if possible i'd like to mount my plates JDM style on the right hand side of the front bumper (facing fwd)

[DommerEOD]

I will not be mounting mine. I know it's CA law but, yeah, nope. I'll just keep it in the car at all times in case i get chased down because of it.


But it doesn't look to bad where it's placed in that picture above.

[MRZ415]

via Tow-Hook ? once the car is out I am sure people
will take Tow-hook brakets for it.. or keep it center
with angle braket so it becomes an Air Damp.

[serialk11r]

tbh, the license plate looks perfect on the bumper strip thing on the BRZ. The FRS...dunno, I wouldn't mind it sitting in the grill too much.

[Nardi330]

Top of the grill where its blanked off. Don't want it on the bumper.

[poormans_LFA]

Originally Posted by Nardi330

Top of the grill where its blanked off. Don't want it on the bumper.

that's what i meant. >me

[Longhorn248]

I'm going to request that the dealer doesn't drill plate holes and "lets me do it myself". I'll leave it off and zip tie it on the grill and take pics to show in court if I ever get a ticket.

[M-17]

^ I don't think I can get away with that here in Mass.
I like the idea so maybe I'll try it or request for the dealer to hold off on the pre-drill at least.

[7thgear]

the only good place to mount a licence plate is at the bottom of a trashbin!

prolly gonna get a tow hook holder. At least that way you can take it off when you go places where you can take it off (take it all off, rawr)

[delongedoug]

Mount them here http://www.ft86club.com/forums/showthread.php?t=3456

[Rabble]

In the back bumper of the bastard unlucky enough to be in front of me when I'm hooning it up on the interstate.

[Dave-ROR]

I won't be mounting one at all. One of the pros of living in hell (Florida).

[TylerLieberman]

Cant you just stick it in the windshield on top of the dash? Thats what I did back when I lived in cali and I never got hassled for it

[#87]

Originally Posted by TylerLieberman

Cant you just stick it in the windshield on top of the dash? Thats what I did back when I lived in cali and I never got hassled for it

You can but you are leaving it up to the officer to decide whether he wants to pull you over or not.

http://www.dmv.ca.gov/pubs/vctop/d03/vc5201.htm
Positioning of Plates

5201. License plates shall at all times be securely fastened to the vehicle for which they are issued so as to prevent the plates from swinging, shall be mounted in a position so as to be clearly visible, and so that the characters are upright and display from left to right, and shall be maintained in a condition so as to be clearly legible. The rear license plate shall be mounted not less than 12 inches nor more than 60 inches from the ground, and the front license plate shall be mounted not more than 60 inches from the ground, except as follows:
(a) The rear license plate on a tow truck or repossessor’s tow vehicle may be mounted on the left-hand side of the mast assembly at the rear of the cab of the vehicle, not less than 12 inches nor more than 90 inches from the ground.
(b) The rear license plate on a tank vehicle hauling hazardous waste, as defined in Section 25117 of the Health and Safety Code, or asphalt material may be mounted not less than 12 inches nor more than 90 inches from the ground.
(c) The rear license plate on a truck tractor may be mounted at the rear of the cab of the vehicle, but not less than 12 inches nor more than 90 inches from the ground.
(d) The rear license plate of a vehicle designed by the manufacturer for the collection and transportation of garbage, rubbish, or refuse that is used regularly for the collection and transportation of that material by a person or governmental entity employed to collect, transport, and dispose of garbage, rubbish, or refuse may be mounted not less than 12 inches nor more than 90 inches from the ground.
(e) The rear license plate on a two-axle livestock trailer may be mounted 12 inches or more, but not more than 90 inches, from the ground.
(f) A covering shall not be used on license plates except as follows:
(1) The installation of a cover over a lawfully parked vehicle to protect it from the weather and the elements does not constitute a violation of this subdivision. A peace officer or other regularly salaried employee of a public agency designated to enforce laws, including local ordinances, relating to the parking of vehicles may temporarily remove so much of the cover as is necessary to inspect any license plate, tab, or indicia of registration on a vehicle.
(2) The installation of a license plate security cover is not a violation of this subdivision if the device does not obstruct or impair the recognition of the license plate information, including, but not limited to, the issuing state, license plate number, and registration tabs, and the cover is limited to the area directly over the top of the registration tabs. No portion of a license plate security cover shall rest over the license plate number.
(g) A casing, shield, frame, border, product, or other device that obstructs or impairs the reading or recognition of a license plate by an electronic device operated by state or local law enforcement, an electronic device operated in connection with a toll road, high-occupancy toll lane, toll bridge, or other toll facility, or a remote emission sensing device, as specified in Sections 44081 and 44081.6 of the Health and Safety Code, shall not be installed on, or affixed to, a vehicle.
(h) (1) It is the intent of the Legislature that an accommodation be made to persons with disabilities and to those persons who regularly transport persons with disabilities, to allow the removal and relocation of wheelchair lifts and wheelchair carriers without the necessity of removing and reattaching the vehicle's rear license plate. Therefore, it is not a violation of this section if the reading or recognition of a rear license plate is obstructed or impaired by a wheelchair lift or wheelchair carrier and all of the following requirements are met:
(A) The owner of the vehicle has been issued a special identification license plate pursuant to Section 5007, or the person using the wheelchair that is carried on the vehicle has been issued a distinguishing placard under Section 22511.55.
(B) (i) The operator of the vehicle displays a decal, designed and issued by the department, that contains the license plate number assigned to the vehicle transporting the wheelchair.
(ii) The decal is displayed on the rear window of the vehicle, in a location determined by the department, in consultation with the Department of the California Highway Patrol, so as to be clearly visible to law enforcement.
(2) Notwithstanding any other law, if a decal is displayed pursuant to this subdivision, the requirements of this code that require the illumination of the license plate and the license plate number do not apply.
(3) The department shall adopt regulations governing the procedures for accepting and approving applications for decals, and issuing decals, authorized by this subdivision.
(4) This subdivision does not apply to a front license plate.