Need Help

[Asphalt11]

Interested in purchasing this radio, (Pioneer - 6.1" - CD/DVD - Apple® iPod®-Ready - In-Dash Receiver)http://www.bestbuy.com/site/Pioneer-...&skuId=7131073 Will this work as far as size?
And Im assuming all I will need is this.http://enfigcarstereo.com/ENFIG_AAA_TOY2.html
this. http://enfigcarstereo.com/ENFIG_RMK_TOY02.html
and this..? http://enfigcarstereo.com/ENFIG_RWH_TOY2.html

Any help is appreciated It will be my first CD/DVD Install Just wasnt sure on the size that would fit, and if the Enfig RMK-TOY02 would fit the radio I picked and the FR-S

[Mr.Jay]

Yep looks bout right

I would just use the beat sonic kit as its a bit cheaprr than buying both a mount and harness.

I just finished wiring up my harness yesterday goin to install tomorrow. My first double din install so I'm hoping it goes well.

[Asphalt11]

Nice!, Thanks alot man, hope all works out well for you, Ill post pictures upon my install.

[1strwdcar]

update with finished pics!

[2forme]

Word of advice, the BeatSonic kit doesn't work with Pioneer head units. The screws provided by BeatSonic or Pioneer aren't long enough to work through the dash kit.

[Asphalt11]

Are you talking about the trim piece that goes around the radio? I believe this one doesnt screw to the face, I saw a video on youtube and the guy has is snap right into the center console radio bezel piece on the frs.. Let me know. Skip to 2:15 in the video to see what Im talking about.


[ame="http://www.youtube.com/watch?v=hSM00J-RApw"]http://www.youtube.com/watch?v=hSM00J-RApw[/ame]

[mbh1101]

Originally Posted by Asphalt11

Are you talking about the trim piece that goes around the radio? I believe this one doesnt screw to the face, I saw a video on youtube and the guy has is snap right into the center console radio bezel piece on the frs.. Let me know. Skip to 2:15 in the video to see what Im talking about.

This is the beat sonic kit. http://www.beatsonicusa.com/bh1.html. I ordered the pioner avh-x5500bhs from ebay. I ran into some problems getting it shipped but i should have the install done this week. I used the metra 70 1761 wiring harness, metra 95 8202 mounting kit, and scosche LSAAB antenna adapter. I will have everything installed this week and i can let you know if everything works. I think everything i ordered was like $25.00. And i would highly recommend getting the HU off of ebay or amazon. So much cheaper.

[2forme]

Originally Posted by Asphalt11

Are you talking about the trim piece that goes around the radio? I believe this one doesnt screw to the face, I saw a video on youtube and the guy has is snap right into the center console radio bezel piece on the frs.. Let me know. Skip to 2:15 in the video to see what Im talking about.

The snap on trim only fits with certain head units. But yes, I'm referring to the little side pieces. I was disappointed that I couldn't use them, considering how much they cost.