Leeberbs Tint and Lamin-X Headlight

[zc06_kisstherain]

I just went to get tints done at Lee's. I had tint job from him when i had my RSX-S in past and he's the best. I also need to have my Lamin-X headlight film done too so i brought them as well.

I hated how stock headlight has clear/chrom style look so i bought light-smoked film and it turned out great~!

anyway, i am posting some pictures for members who is looking for tints and other paint protection and here's lee's website below.

https://www.facebook.com/#!/leeberbs










and here're Lamin-X lightly gun smoked film. if you compare your stock headlight, it looks so much better. Too dark film looks ghetto and didnt want that look. this will give you like black-out headlght.







all comments are welcome.

[chenshuo]

white car black everything else, looks nice. now u can have privacy when u have fun with a hot chick in a hot car.

[cslntuee]

Did you use Tint (lightest) or Gunsmoke (med) on your head light?
http://www.lamin-x.com/Subaru-BRZ-13...ers-p/s026.htm
Did you also plan to smoke your tail light?
ps. Did you feel any different (become darker) when you switch on the headlight in the evening?
Thanks a lot.

[zc06_kisstherain]

Originally Posted by cslntuee

Did you use Tint (lightest) or Gunsmoke (med) on your head light?
http://www.lamin-x.com/Subaru-BRZ-13...ers-p/s026.htm
Did you also plan to smoke your tail light?
ps. Did you feel any different (become darker) when you switch on the headlight in the evening?
Thanks a lot.

sorry i just edited my post.
it's Tint one that i used. Gun Smoked is super dark an cant even see your headlight.

Lamin-X was applied druing the day and really havent turned on light for night time yet but i doubt it will much affect on vision on the roads since it's really lightly tinted.
I have reverse and side markers well but didnt do it yet. Tail Light film is not available.

[Chasebot2000]

Did you get precut or sheets for the headlights?

[zc06_kisstherain]

Originally Posted by Chasebot2000

Did you get precut or sheets for the headlights?

of course it is pre-cut fomr Lamin-X

[cslntuee]

Originally Posted by zc06_kisstherain

sorry i just edited my post.
it's Tint one that i used. Gun Smoked is super dark an cant even see your headlight.

Lamin-X was applied druing the day and really havent turned on light for night time yet but i doubt it will much affect on vision on the roads since it's really lightly tinted.
I have reverse and side markers well but didnt do it yet. Tail Light film is not available.

Any update for driving in the evening? Did you feel any different for the output of the light?
Thanks.
Ps. I read one post here
http://www.ft86club.com/forums/showthread.php?t=29584
which mention that Lamin-X tint is equal to 60% tint. It did look good, but I still want to keep safe driving. I am a little bit hesitate. Thanks again.

[xDBOYx]

Which film and % did u get with lee. Lee did mine In a wincos 5%.

[zc06_kisstherain]

Originally Posted by cslntuee

Any update for driving in the evening? Did you feel any different for the output of the light?
Thanks.
Ps. I read one post here
http://www.ft86club.com/forums/showthread.php?t=29584
which mention that Lamin-X tint is equal to 60% tint. It did look good, but I still want to keep safe driving. I am a little bit hesitate. Thanks again.

Light output is fine. You wont notice much

Sent from my Galaxy Nexus using Tapatalk 2

[zc06_kisstherain]

Originally Posted by xDBOYx

Which film and % did u get with lee. Lee did mine In a wincos 5%.

Charcol? One and i posted percentage pnmg first page which is 35 & 25

Sent from my Galaxy Nexus using Tapatalk 2