Staggered 18x8.5 and 18x9.5 WORK XSAs - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

dminner · 09-25-2012, 01:08 PM

I recently picked these up for my scion xd...

However, I got a little over zealous on the rear fitment and I just cant get the rears to work on my car without a fairly substanial amount of fender work

HOWEVER, I was told that these are great FR-S specs and that I should post here. I don't have an FR-S so I am not an active member of this forum, but I have a great deal of references on bbsquad and clubxb forums.

These wheels are 5x100. They are staggered at 18x8.5+30 and 18x9.5+32.

They are WORK XSA with gold faces and polished lips.

FIRST $1400 + shipping takes them!!!!

If anyone is interested, let me know if you would like anymore pics, details, or references

Here are a few pics:

Asphaltfrs1 · 09-25-2012, 03:00 PM

How much do they weigh?

dminner · 09-25-2012, 03:39 PM

Not sure, I can weigh them when I get home tonight and I will post up weights.

zoomzoomers · 09-25-2012, 03:43 PM

Nice! Someone will probably get in on this. GLWS

dminner · 09-25-2012, 08:12 PM

Alright guys, they are 24.1 lbs a piece.

deucethemoose · 09-25-2012, 08:26 PM

stretched tire + a bit of camber should make these fit just fine w/o modification.

OmarGC · 09-26-2012, 10:25 AM

Errrrrr

Sent from my PC36100 using Tapatalk 2

dminner · 09-26-2012, 10:40 AM

^^^Not sure if "errrr" is a good or bad thing...

But you are fairly local to me and I would be willing to drive a little ways to eliminate shipping

jadewbj · 09-26-2012, 11:01 AM

Very nice rims, the rears will be a little aggressive but will probably work.

dminner · 09-26-2012, 11:06 AM

Thanks.

Yeah, like I said, I don't have an FR-S...

But, the specs of the XSAs are pretty spot on to MANY of the wheels being sold in the vender section of this forum.

I see a couple ads for 18x10+38. My 9.5+32s will stick out the EXACT same as these according to and offset calculator. I also see several 18x9.5+30 wheels. The XSA rears are 2mm LESS aggressive than these.

According to an offset calculator, the XSAs should give a near identical fitment to these: http://www.ft86club.com/forums/showthread.php?t=15458
The XSAs fronts are just slightly less aggressive and will stick in 2mm further.

OmarGC · 09-26-2012, 06:44 PM

I'm in IL actually and I do want, not gonna lie but I just got some staggered SSR's and could only have one or the other. That's what the err was for lol

Sent from my PC36100 using Tapatalk 2

dminner · 09-26-2012, 06:49 PM

Ah, gothca.

Also guys, I MAY be interested in trades for less aggressive wheels. With the xD, my MAX in the rear needs to be around a 18x8.5+30ish, 18x9+40ish something along those lines.

OmarGC · 09-26-2012, 06:59 PM

See I have 6 SSR GT2's 4 are 18x8.5 +40 and 2 are 18x10 +33. Planned on rolling spacers on the 8.5s on the front then the 10s out back.

Sent from my PC36100 using Tapatalk 2

dminner · 09-29-2012, 09:00 PM

~B~U~M~P~

09-25-2012, 01:08 PM	#1
dminner Member Join Date: Sep 2012 Drives: Scion xD Location: Indiana Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Staggered 18x8.5 and 18x9.5 WORK XSAs I recently picked these up for my scion xd... However, I got a little over zealous on the rear fitment and I just cant get the rears to work on my car without a fairly substanial amount of fender work HOWEVER, I was told that these are great FR-S specs and that I should post here. I don't have an FR-S so I am not an active member of this forum, but I have a great deal of references on bbsquad and clubxb forums. These wheels are 5x100. They are staggered at 18x8.5+30 and 18x9.5+32. They are WORK XSA with gold faces and polished lips. FIRST $1400 + shipping takes them!!!! If anyone is interested, let me know if you would like anymore pics, details, or references Here are a few pics:

09-25-2012, 03:43 PM	#4
zoomzoomers Senior Member Join Date: Nov 2011 Drives: 2013 Subaru SWP BRZ Limited 6AT Location: Darkside Posts: 1,862 Thanks: 526 Thanked 305 Times in 207 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Nice! Someone will probably get in on this. GLWS __________________ Man Law#17:A man in the company of a hot, seductively dressed, woman MUST remain sober enough to fight! MODS: AVO tubes + filter, Cusco (F) strut brace w/ MC brace, Perrin CBE, Subaru OEM trunk tray, Grimmspeed front license re-locator & hood struts and Beatsonic rear cam.

09-25-2012, 08:26 PM	#6
deucethemoose Functionally Retarded Join Date: Jan 2012 Drives: LinkECU V6 MR2 - MKVII Golf R Location: PNW Posts: 709 Thanks: 81 Thanked 425 Times in 205 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	stretched tire + a bit of camber should make these fit just fine w/o modification. __________________ 1991 MR2 - T-tops - Crimson Red - 1MZ-FE 3.0L - Other Stuff I'm not really an asshole, but I play one on the internet.

09-26-2012, 10:25 AM	#7
OmarGC My FR-S has 5 gears Join Date: Aug 2012 Drives: FRS/280z/Tundra Location: St. Louis Posts: 1,994 Thanks: 626 Thanked 1,065 Times in 572 Posts Mentioned: 49 Post(s) Tagged: 3 Thread(s)	Errrrrr Sent from my PC36100 using Tapatalk 2 __________________ Omar GC 2JZ - 6870 - stock block - 1000whp? Instagram: 2jzus

09-26-2012, 06:44 PM	#11
OmarGC My FR-S has 5 gears Join Date: Aug 2012 Drives: FRS/280z/Tundra Location: St. Louis Posts: 1,994 Thanks: 626 Thanked 1,065 Times in 572 Posts Mentioned: 49 Post(s) Tagged: 3 Thread(s)	I'm in IL actually and I do want, not gonna lie but I just got some staggered SSR's and could only have one or the other. That's what the err was for lol Sent from my PC36100 using Tapatalk 2 __________________ Omar GC 2JZ - 6870 - stock block - 1000whp? Instagram: 2jzus

09-25-2012, 03:00 PM	#2
Asphaltfrs1 Senior Member Join Date: May 2012 Drives: 2013 asphalt fr-s Location: Los angeles Posts: 488 Thanks: 109 Thanked 125 Times in 88 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	How much do they weigh?

09-25-2012, 03:39 PM	#3
dminner Member Join Date: Sep 2012 Drives: Scion xD Location: Indiana Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Not sure, I can weigh them when I get home tonight and I will post up weights.

09-25-2012, 08:12 PM	#5
dminner Member Join Date: Sep 2012 Drives: Scion xD Location: Indiana Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Alright guys, they are 24.1 lbs a piece.

09-26-2012, 10:40 AM	#8
dminner Member Join Date: Sep 2012 Drives: Scion xD Location: Indiana Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	^^^Not sure if "errrr" is a good or bad thing... But you are fairly local to me and I would be willing to drive a little ways to eliminate shipping

09-26-2012, 11:06 AM	#10
dminner Member Join Date: Sep 2012 Drives: Scion xD Location: Indiana Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Thanks. Yeah, like I said, I don't have an FR-S... But, the specs of the XSAs are pretty spot on to MANY of the wheels being sold in the vender section of this forum. I see a couple ads for 18x10+38. My 9.5+32s will stick out the EXACT same as these according to and offset calculator. I also see several 18x9.5+30 wheels. The XSA rears are 2mm LESS aggressive than these. According to an offset calculator, the XSAs should give a near identical fitment to these: http://www.ft86club.com/forums/showthread.php?t=15458 The XSAs fronts are just slightly less aggressive and will stick in 2mm further.

09-26-2012, 06:49 PM	#12
dminner Member Join Date: Sep 2012 Drives: Scion xD Location: Indiana Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Ah, gothca. Also guys, I MAY be interested in trades for less aggressive wheels. With the xD, my MAX in the rear needs to be around a 18x8.5+30ish, 18x9+40ish something along those lines.

09-26-2012, 06:59 PM	#13
OmarGC My FR-S has 5 gears Join Date: Aug 2012 Drives: FRS/280z/Tundra Location: St. Louis Posts: 1,994 Thanks: 626 Thanked 1,065 Times in 572 Posts Mentioned: 49 Post(s) Tagged: 3 Thread(s)	See I have 6 SSR GT2's 4 are 18x8.5 +40 and 2 are 18x10 +33. Planned on rolling spacers on the 8.5s on the front then the 10s out back. Sent from my PC36100 using Tapatalk 2 __________________ Omar GC 2JZ - 6870 - stock block - 1000whp? Instagram: 2jzus

09-29-2012, 09:00 PM	#14
dminner Member Join Date: Sep 2012 Drives: Scion xD Location: Indiana Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	~B~U~M~P~

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
>>> Klutch SL14 staggered 18x8.5/18x9.5 wheels - starting @ $985.00 shipped	speed depot	Wheels and Tires	35	12-05-2012 12:54 PM
>>> Miro 111 18x8.5/18x9.5 staggered concave wheels - starting @ $1010.00 shipped	speed depot	Wheels and Tires	37	12-05-2012 12:52 PM
WORK Emotion Kiwami - 18x8.5/9.5. Staggered For FRS/BRZ * Available Now *	RavSpec	Wheels and Tires	59	07-24-2012 01:07 PM

User Name		Remember Me?
Password