Pedal Shift / Extender Kit - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Frost · 06-07-2022, 03:52 AM

Hi folks,

Just wondering if anyone has attempted to install any of the first gen pedal shifter kits onto the second gen.

I've been having long term foot injury issues and my podiatrist has forced me to go with shoes that make it tricky to heel toe in (turns out I've always been wearing a shoe that's too short for me but my width is fine). I find the second gen brake + gas pedal gap and depth means I'm VERY awkwardly twisting my leg to get proper brake pedal modulation whilst blipping the gas with my heel.

I was looking at the Verus Throttle Spacer kit: https://www.ftspeed.com/part/00a-xxx...t#.Yp8CEKjMI2w

Any other suggestions are welcome.

Thanks.

Kev

Haust · 06-07-2022, 01:47 PM

I've been looking at the SRPracing pedal kit, for all of them. The accelerator has a nice extension and the entire set is customizable. You can also get just the accelerator, if that's all you want.

https://www.srpracing.com/pd_brz_racing_pedals.cfm

https://www.srpracing.com/pd-brz-fr-...pedal-only.cfm

eyeballs · 06-08-2022, 12:27 AM

I went with the cuzco pedal cover which gives you more surface on the brake side and a tad more height. It works well for me, though I use more of a left-right technique then actual heel-toe. I have not tried a spacer kit, though I do wonder how that would compare.

mike2100 · 06-08-2022, 07:10 AM

Quote:

Originally Posted by Haust

I've been looking at the SRPracing pedal kit, for all of them. The accelerator has a nice extension and the entire set is customizable. You can also get just the accelerator, if that's all you want.

https://www.srpracing.com/pd_brz_racing_pedals.cfm

https://www.srpracing.com/pd-brz-fr-...pedal-only.cfm

Had these on my 13 FRS and 18 BRZ and loved them. Could heel-toe in flip flops.

Haust · 06-08-2022, 02:00 PM

Quote:

Originally Posted by mike2100

Had these on my 13 FRS and 18 BRZ and loved them. Could heel-toe in flip flops.

I'm pretty sold on a set of these. I like that you can get them in different patterns and treads. I'm probably going with either the grid or bock tread in all black.

PaperM · 06-09-2022, 07:03 PM

+1 for the Cusco pedal cover, works super well for me, but I also do more of a right-side-of-my-foot-blip, rather than a full heel movement. Adds a bit of height and some width.

I put some black grip tape over mine, as the full chrome finish didn't match the other pedals. Also requires no drilling, so super easy to revert to stock if needed.

justinco · 06-09-2022, 08:07 PM

I've also used the Cusco pedal cover on all 3 of my cars. Almost impossible to heel/toe without it (for me anyways). The SRP pedal covers are nice, but Cusco pedal cover is cheap and doesn't require any drilling (for throttle pedal).

timurrrr · 06-10-2022, 01:27 AM

I had the Verus pedal spacer on my gen1 car.
After I got comfortable with heel-toe I removed it and found that I can heel-toe better on stock pedals

06-09-2022, 08:07 PM	#7
justinco btr.life Join Date: Aug 2015 Drives: 2022 GR86 Location: Arizona Posts: 1,099 Thanks: 662 Thanked 1,094 Times in 491 Posts Mentioned: 23 Post(s) Tagged: 0 Thread(s)	I've also used the Cusco pedal cover on all 3 of my cars. Almost impossible to heel/toe without it (for me anyways). The SRP pedal covers are nice, but Cusco pedal cover is cheap and doesn't require any drilling (for throttle pedal). __________________ 2022 Toyota GR86 - The BTR Garage 1994 BMW 325is \| 2013 Scion FRS \| 2017 Subaru BRZ

06-10-2022, 01:27 AM	#8
timurrrr Senior Member Join Date: May 2019 Drives: 2022 GR86 Location: Between Sonoma and Laguna Seca Posts: 1,712 Thanks: 2,134 Thanked 1,304 Times in 720 Posts Mentioned: 30 Post(s) Tagged: 1 Thread(s)	I had the Verus pedal spacer on my gen1 car. After I got comfortable with heel-toe I removed it and found that I can heel-toe better on stock pedals __________________ Follow the build thread for my GR86!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cusco Pedal Install & Pedal Lateral Stiffening (Sideways Loose Pedal)	BOND007_LTK	DIY (Do-It-Yourself) Guides	5	05-20-2022 04:12 PM
WeAreLikeWise shift knob and extender	BaeArea	Interior Parts (Incl. Lighting)	0	03-06-2018 06:37 PM
BNIB Cusco Accelerator Pedal Extender	scoobykim	Interior Parts (Incl. Lighting)	3	07-06-2017 09:01 PM
DIY - SRP Sullivan Racing Products Gas Pedal Extender	JustDoItMikey	DIY (Do-It-Yourself) Guides	6	06-01-2017 04:56 PM
TITANIUM SHIFTER SHIFT KNOB EXTENDER	JPxM0Dz	Cosmetic Modification (Interior/Exterior/Lighting)	2	10-11-2013 11:55 AM

06-07-2022, 01:47 PM	#2
Haust Driver Join Date: May 2022 Drives: 2022 BRZ Location: Washington Posts: 11 Thanks: 11 Thanked 6 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I've been looking at the SRPracing pedal kit, for all of them. The accelerator has a nice extension and the entire set is customizable. You can also get just the accelerator, if that's all you want. https://www.srpracing.com/pd_brz_racing_pedals.cfm https://www.srpracing.com/pd-brz-fr-...pedal-only.cfm

06-08-2022, 12:27 AM	#3
eyeballs Senior Member Join Date: Dec 2021 Drives: '22 BRZ Location: West CO Posts: 151 Thanks: 22 Thanked 60 Times in 47 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I went with the cuzco pedal cover which gives you more surface on the brake side and a tad more height. It works well for me, though I use more of a left-right technique then actual heel-toe. I have not tried a spacer kit, though I do wonder how that would compare.

06-09-2022, 07:03 PM	#6
PaperM Junior Member Join Date: Nov 2021 Drives: '22 CWP BRZ 6MT Location: SoCal Posts: 8 Thanks: 0 Thanked 25 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	+1 for the Cusco pedal cover, works super well for me, but I also do more of a right-side-of-my-foot-blip, rather than a full heel movement. Adds a bit of height and some width. I put some black grip tape over mine, as the full chrome finish didn't match the other pedals. Also requires no drilling, so super easy to revert to stock if needed.

User Name		Remember Me?
Password