|
||||||
| Issues | Warranty | Recalls / TSB Problems, issues, recalls, TSBs |
 |
|
|
Thread Tools | Search this Thread |
04-26-2020, 11:39 PM
|
#1 |
|
Member
Join Date: Jun 2014
Drives: 2014 Subaru BRZ
Location: Stuart, Fl
Posts: 19
Thanks: 0
Thanked 10 Times in 7 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Help needed! Bank 2 intake keeps retarding
Hey guys I have built motor from a reputable Subaru performance shop. All the timing components were replace when the motor was built. The car is on a Motec m150 so no codes unfortunately. The issues I’m having is bank 2 intake keeps retarding timing I’ll post pics below. My tuner took the builders advice on locking cams at 0 and bank 2 intake still was retarding. The car was on 20 lbs of boost and only made 243 something is definitely wrong. It’s been about 2 months without any real updates from the builder which is disappointing but I understand with everything that’s going on. My last motor did not have this issue it made great power but unfortunately starting going through a bunch of oil which why switched to a Subaru specialist. Any help is appreciated. BTW sorry for the sideways pictures my iPhone won’t let me adjust them
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Smoke from driver side bank | nochilljay | Issues | Warranty | Recalls / TSB | 1 | 11-14-2019 02:23 PM |
| Setting Timing LH Bank | Doopy81 | Issues | Warranty | Recalls / TSB | 32 | 03-01-2019 06:48 AM |
| Good helmet that won't break bank | TMW | Off-Topic Lounge [WARNING: NO POLITICS] | 8 | 04-08-2016 02:24 PM |
| Intake manifold cover needed | afishl1 | Engine, Exhaust, Transmission | 2 | 04-20-2015 08:04 AM |
| Syste!m too lean bank 1 | jonbonazza | Issues | Warranty | Recalls / TSB | 55 | 07-05-2014 02:36 AM |
