Phenryiv1's door spacer review

[cruzinbill]

I got these spacers sent to me about a week ago a finally was able to sit down and write about them and load up a few pictures.

First let me say thanks to phenryiv1 for sending them to me I'm glad I could help with test fitting. When I first received them, I couldn't wait to rip open the package and get my grubby little hands on them. The pictures online really do no justice to the quality of these things. Just imagine a piece of mdf, only much lighter and to me stronger. They were cleaned up well also all holes and cuts were clean, no burrs or other bullshit that I had to mess with before installing them.

Overall I would have to rate these a 5/10 tho. Now that is until he does about 5 mins of tweeks to it for the next batch. The problem I ran into as you will see is that they dont totally cover the original hole perfectly. its about a 1/4" gap or so on the top. For now I have deadner between my door and the piece so its no problem.

The other problem is I think some new hardware should be shipped out with this even if you charge another 2-3$. The stock hardware is much too short and I think the plastic inserts are shit anyway. I ended up getting some 1.5" long bolts and securing them with washers and lock nuts on the backside. Its not going anyway and has a nice tight seal.

If these 2 items can be addressed I would easily rate it 10/10. It really is a nice set for a good price. It fit very well(pretending it is the next batch a lil taller) to my Milles, I did not have any issue with hitting the window nor with diameter.

I attempted to use the dash speaker pieces he included but between time and incompatibility it wasn't even worth taking pics of trial fitment. I included a shot of how I ended up doing my mids and tweets tho.

Also sorry in advance for my picture taking, I am pretty terrible at it.

[phenryiv1]

I wish that you had provided me feedback and pictures BEFORE posting a full review. With your feedback I could have corrected the gap issue in no time.

[cruzinbill]

Its not to bad mouth your product, its of them as is. Like I stated once you make the one small adjustment they will be perfect. Hell, even with the tiny discrepancy of being beta ones they fit better that 99% of spacers out there for other cars as well.

[phenryiv1]

Originally Posted by cruzinbill

Its not to bad mouth your product, its of them as is. Like I stated once you make the one small adjustment they will be perfect. Hell, even with the tiny discrepancy of being beta ones they fit better that 99% of spacers out there for other cars as well.

Sorry, not meaning to sound like I was bashing your review. Just that I could have fixed the issue for the other set that I sent out.

If you will send me your OEM speaker, I'll return it with a new pair of spacers cut (no cost) with the bottom edge relocated. I just need a real OEM speaker as a template. Cutting by measurement got me to 95% but I want them perfect...or at least 99.9%

[cruzinbill]

I can send you both the door speaker and dash speaker if you like, only problem is I cant untill next week. so if you still dont have any then Ill send you mine.

[Thefuzz]

Ouch tough crowd. Should've let him finish his prototype before throwing the products faults out to the community.

[Chewie4299]

Originally Posted by Thefuzz

Ouch tough crowd. Should've let him finish his prototype before throwing the products faults out to the community.

If anything it gave him a chance to show he cares about making it right. That's a good thing.

Sent from my Galaxy Nexus using Tapatalk 2

[Symbiont]

Originally Posted by Chewie4299

If anything it gave him a chance to show he cares about making it right. That's a good thing.

Sent from my Galaxy Nexus using Tapatalk 2

I guess, but honestly that would have upset me a lot, too. If I sent someone something that was beta/test, then I wouldn't expect a public review on it before I even heard back from the guy testing it for me.

[Chewie4299]

Originally Posted by Symbiont

I guess, but honestly that would have upset me a lot, too. If I sent someone something that was beta/test, then I wouldn't expect a public review on it before I even heard back from the guy testing it for me.

Agreed. I was just looking on the bright side.

I would have communicated privately first.

[phenryiv1]

Originally Posted by cruzinbill

I can send you both the door speaker and dash speaker if you like, only problem is I cant untill next week. so if you still dont have any then Ill send you mine.

Back from vacation....


I'll take you up on that, if the offer still stands. I have a wider material and a widened prototype, but I'd like to do more revisions with a real speaker in-hand, if you can send one my way. I have tried to buy several sets on here but the sales all fell through.l If I can borrow yours, I'll send you back the speaker and the revised spacers.

[phenryiv1]

Updated/widened design sent out to 4 new customers.

[so26]

Do you guys remember what thread size the 3 screws are that hold the spacer to the door?

*Never mind the paperwork Phenryiv1 sends with the spacers already contains the screw specs.

[phenryiv1]

Originally Posted by so26

Do you guys remember what thread size the 3 screws are that hold the spacer to the door?

*Never mind the paperwork Phenryiv1 sends with the spacers already contains the screw specs.

For reference of others:

Six (6) #10 x 1.25” or 1.5” sheet metal screws (to attach the spacers to the doors)

[Jimbo]

Originally Posted by Thefuzz

Ouch tough crowd. Should've let him finish his prototype before throwing the products faults out to the community.

Yeah, now you know why companies make people sign beta agreements.