Few pictures from my first track day

[Jesse36m3]

So I've been a member on this forum nearly 4 years and haven't really shared much regarding my car, however I wanted to share that I ran with SCDA at Palmer on April 7. Had an absolute blast and met some great people along with a fantastic instructor.

I installed a JDL kit over the winter and made it a mission to get everything running perfectly before I brought it. She did not disappoint.

Specs if anyone cares:
- '13 Limited, 74k miles, 6spd
- JDL V2 UEL
- "no cut" Intercooler
- GTX2860R Gen II
- Turbosmart BOV, Precision EWG
- Bronze ceramic coating, header wrap, PTP blanket
- JDL 2.5" OP/FP combo w/ cat & resonator
- MXP Comp RS catback
- Velox AOS
- JDL oil cooler
- P3 Gauge

- Hotchkis springs w/ stock struts (this combo has been on the car since 20k miles and has held up amazing. Just getting a little old and worn out now)
- SPL Lower control arms, camber bolts, etc
- Cusco motor mounts
- Perrin trans mount & rear shifter bushing
- Raceseng Ashiko

- DBA slotted rotors
- ProjectMu Pads & fluid
- Stoptech SS lines

- 17x9 +35 RPF1 & 245/40 MPSS

- Been running with motul gear fluid forever now, and recently just switched to Millers Nanodrive 5w-30 for the track.


Looking forward to the next event!

[jubella2]

The no cut kit looks clean! Yours is one of the few I've seen but I like it.

[Joesurf79]

First track day! Nice! Welcome to the addiction !


Clean looking car - I have a white one too (it's the best...except for when you need an entire bottle of race rubber remover after a two day event )!