OFT question

[oppiee]

Hey guys,

Currently just started running on OFT EL stage 2, 93 oct. I was wondering what parameters I should be looking for in torque (OBDII ) to make sure the car is running normally with tune.

Thanks!!

[JermMX5]

Originally Posted by oppiee

Hey guys,

Currently just started running on OFT EL stage 2, 93 oct. I was wondering what parameters I should be looking for in torque (OBDII ) to make sure the car is running normally with tune.

Thanks!!

Knock correction is the biggest as far as I'm aware. You want to make sure it's not constantly pulling timing do to detonation.

[Teseo]

Why not use the oft itself? You can looks parameters too

[oppiee]

on OFT are we looking at the ignition advance multiplier?

[JermMX5]

I don't have my OFT yet, but you'll be looking for something like Knock control, or KC value, it might be KC learned.

[oppiee]

Originally Posted by JermMX5

I don't have my OFT yet, but you'll be looking for something like Knock control, or KC value, it might be KC learned.

Icic thank will take a look! I am just debating if I should try the UEL map for the MXP EL header b/c looks like an UEL lol

[solidONE]

There are plenty of threads talking about what to log on your OFT. Just off the top of my head RPM, engine loads, knock parameters, AFR commanded and actual, MAF voltage, ignition advance, fuel trims, oil temps are all important things to monitor.

http://www.ft86club.com/forums/showt...highlight=Logs