Chameleon Glass Housing Projector Fog Assembly

[pansontw]

Hi Guys/Gals,

Here we wanna bring this state of the art product on board.

The Chameleon Projector Fog Lamp System.

Nowadays, people would spend $500~$1000 on their taillights or headlights. Cool looking has become part of the selling point on these lighting parts. However, if we look at all the fog products available on market, without the cool looking effects, fogs are usually seen as a not-so-important accys. PPl would even spend more money on good looking DRL instead of Fog lights.

However, this is wrong!!!

Fog lights shall be treated as a must-have safety equipment just like headlights! Especially for those living in northern/eastern part of continental, driving in snowing, foggy, and raining days is inevitable during their daily lives.
An excellent fog lamp system will vastly improve your driving experience and safety for sure.


Chameleon Projector Fog Lamp System

We've summarized some quick Q & A for your reference.

Q1. Are these DOT/SAE approved?
A1. Yes, the kit is DOT/SAE approved for legal street use in states.

Q2. Do we need to buy dual color leds in order to have color changing function?
A2. No, the system does not need dual color leds. Color Changing Mechanism is integrated inside the projector fog housing. The kit also includes either 35W 6000k H11 HID or H11 LED bulbs (depending upon your choice).

Q3. Can I use higher power HID or LED to maximize the output?
A3. NO, the system is designed to work with max 35W 6000K HID or 50W LED bulbs. Anything beyond that may damage the projector housing.

Q4. Does the kit come w/ complete wire harness?
A4. Yes, all included along with an installation booklet for easy DIY.

[pansontw]

Product Detail:

Item: JW Chameleon Fog Lamp System
Compatibility: direct replacement to stock fog lamps

• Subaru BRZ

• 2014+ Subaru Forester (SJ)

• 2010-2014 Subaru Legacy Sedan/Outback (BM/BR)

• 2015+ Subaru Legacy Sedan/Outback (BN/BS)
• 2015+ Subaru WRX/STI

Price: $500/set (Complete L & R glass housing and a pair of LED or HID bulbs)
Warranty: 12 months covering any manufacturing defects and LED or HID bulbs
Complete set includes:

• 2 Chameleon glass projector housing (L&R)
• 1 Controller
• 1 in-dash switch (On/Off & color changing)
• 2 extension cord to connect between fog & controller (made with high temp-resist material to prolong the system under high engine heat)
• 35W 6000K HID bulbs w/ ballasts or 50W LED bulbs (2 options to choose from)
  
• Attaching accys including T-clips, double side tape, and girdles to make wires neat & tie

[pansontw]

Bump~

We highly recommend this product for members living in Northern part of America where fog, snow, and raining condition are inevitable. This kit massively improves visibility while driving in snowing or foggy weather

a) The glass projector housing is by far the biggest available on market!
b) The light pattern is by far the most aligned on market!
c) The light output on whole horizontal pattern is by far the most balanced!
d) The in-housing color changing mechanism is patented and only available on this kit!

[pansontw]

Bump, feel free to post questions/comments.
Color changing mechanism is not just for show, safety is what matters .

[pansontw]

Bump~~

[pansontw]

Bump!!!

[pansontw]

Bump for the only built-in color changing fog lamp on market!!!

[pansontw]

Bump~~~

[pansontw]

Bump....

[pansontw]

JW Chameleon Fog System on magazine

[pansontw]

Bump for more pictures

[rixter145]

Any install vid/ guide on this? Interested

[go_a_way1]

Neat but I went with ducts. If I had fog lights I would be all over these

[pansontw]

Originally Posted by rixter145

Any install vid/ guide on this? Interested

Here is a short clip introducing this fog system.

[ame]https://m.youtube.com/watch?v=okaHJXKBC94&ebc=ANyPxKpWxdLfS18MgR1blV5J0W 5M3or-N8Y5Er_DcXvr8jyqLwlx8L7zhgtPkf2On2jiv1gf3SrUoe_xky Y6UBGcioqdy3lHCQ[/ame]


Installation is really straight forward. The kit comes with 1 control box located in engine bay with cords connecting towards 2 fogs and 1 switching button placed right beside driver seat.
The most difficult part during installation would be how to pull the switch module through firewall. The rest are simple plug-n-play.