Anyone has a head or engine apart at the moment? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

puma · 09-12-2016, 10:52 PM

If so i would like to get some info on the lifters, if you have a head apart, let me know, i kind of need a quick hand.

thanks a lot

humfrz · 09-13-2016, 12:28 AM

Well now, I don't have a head apart ..... but, what's your question, maybe someone can help.....

humfrz

FRS Justin · 09-13-2016, 12:36 AM

Need to know year of engine to help as their are valve train differences.....

puma · 09-13-2016, 08:23 AM

Correct! Here is my question, sent the heads to get resurfaced and didn't know the part of the lifter in the head could be removed, they came back all in a bag and now i don't know which one goes where. There are 2 types, one that has a bigger hole and one that has a smaller hole. From the part numbers it seems like one is made to go LH and the other RH but which goes where, they fit in both holes.

My car is a 13, it seems like in 14 they are all the same.

Anyone knows if the small holes go on the right or on left?

humfrz · 09-13-2016, 02:46 PM

Well now ........ I don't know ........ but I would GUESS that they are different because one type is for the exhaust valves, the other type for the intake valves ...... just guessing ...... really.

humfrz

GsxrMe · 09-13-2016, 03:05 PM

I think he needs help. Not a troll, call FBM, MAP or revworks. Im sure they will tell you.

humfrz · 09-13-2016, 03:13 PM

Quote:

Originally Posted by GsxrMe

I think he needs help. Not a troll, call FBM, MAP or revworks. Im sure they will tell you.

Who are you calling a troll ........ ??

humfrz

puma · 09-13-2016, 03:17 PM

nan from the parts list it (that we can't see clearly now i realise it) says one is for the right bank and the other is for the left bank, i just don't know which is which.

I decided to wait an ordered one from Toyota since they could get it tomorrow, then i will know which one goes where.

Ultramaroon · 09-13-2016, 06:14 PM

Quote:

Originally Posted by puma

nan from the parts list it (that we can't see clearly now i realise it) says one is for the right bank and the other is for the left bank, i just don't know which is which.

I decided to wait an ordered one from Toyota since they could get it tomorrow, then i will know which one goes where.

@Nigelr32 has experience with this.

http://www.ft86club.com/forums/showt...03#post2402903

puma · 09-13-2016, 06:31 PM

yeah that is exactly it! Nigel if you can help me out and tell me which goes in the left and which on the right that would be good.

Ultramaroon · 09-13-2016, 06:44 PM

Quote:

Originally Posted by puma

yeah that is exactly it! Nigel if you can help me out and tell me which goes in the left and which on the right that would be good.

Oh! I just noticed a few posts earlier in that thread he said the big holes are on the right side.

But which right is that? I'm wary of relative references.

humfrz · 09-13-2016, 08:29 PM

Quote:

Originally Posted by puma

yeah that is exactly it! Nigel if you can help me out and tell me which goes in the left and which on the right that would be good.

You may consider sending him a PM........

humfrz

Ultramaroon · 09-13-2016, 08:50 PM

^this^

Can't depend on the mention function notifying a user but PMs are 100%. Looks like he still logs in daily.

puma · 09-13-2016, 10:05 PM

Oh ok thought mention was enough, just sent him a PM, thanks guys.

09-12-2016, 10:52 PM	#1
puma crew chief Join Date: Mar 2014 Drives: Race car FR-S Location: Quebec Posts: 378 Thanks: 6 Thanked 189 Times in 82 Posts Mentioned: 14 Post(s) Tagged: 0 Thread(s)	Anyone has a head or engine apart at the moment? If so i would like to get some info on the lifters, if you have a head apart, let me know, i kind of need a quick hand. thanks a lot

09-13-2016, 12:36 AM	#3
FRS Justin Senior Member Join Date: May 2014 Drives: 2013 Asphalt FRS Location: San Antonio Posts: 994 Thanks: 693 Thanked 695 Times in 417 Posts Mentioned: 22 Post(s) Tagged: 1 Thread(s)	Need to know year of engine to help as their are valve train differences..... __________________ Instagram FT86PROJECT9S Facebook FT86PROJECT9S 710whp

09-13-2016, 03:05 PM	#6
GsxrMe Senior Member Join Date: Jul 2015 Drives: Late 2014 Subaru BRZ Location: Cape Coral, FL Posts: 557 Thanks: 20 Thanked 184 Times in 139 Posts Mentioned: 5 Post(s) Tagged: 2 Thread(s)	I think he needs help. Not a troll, call FBM, MAP or revworks. Im sure they will tell you. __________________ 2014 Subaru BRZ FBM Turbokit: GTX3076R - ECUTEK HRI FlexFuel tune - FBM 3" Turboback Exhaust - 550cc Injectors - Walbro 485 Fuel Pump - 4bar Map Sensor - FBM Oil Pan - ACT SB7-XTSS - AMSOIL all fluids - Forester XT Oil Cooler - Cusco engine, trans mounts - Whiteline rear differential bushings - Perrin shifter bushing - Firehawk 235/45/17 - AEM Failsafe

09-13-2016, 08:50 PM	#13
Ultramaroon not playing cards Join Date: Sep 2014 Drives: a 13 e8h frs Location: vantucky, wa Posts: 32,395 Thanks: 53,053 Thanked 37,228 Times in 19,308 Posts Mentioned: 1117 Post(s) Tagged: 9 Thread(s)	^this^ Can't depend on the mention function notifying a user but PMs are 100%. Looks like he still logs in daily. __________________ service manuals

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My first teeheehee moment	softgrip	BRZ First-Gen (2012+) — General Topics	25	03-18-2016 09:48 AM
Blown engine! known head problems?	Dmitri	Issues \| Warranty \| Recalls / TSB	72	08-23-2014 04:51 AM
Had an Oh S---! moment	D4S	Scion FR-S / Toyota 86 GT86 General Forum	17	04-12-2013 02:35 PM
Oh !@#% moment	RRnold	Off-Topic Lounge [WARNING: NO POLITICS]	31	09-19-2011 02:13 PM
WTF moment last night	4agze	Off-Topic Lounge [WARNING: NO POLITICS]	7	09-16-2010 06:26 PM

09-13-2016, 12:28 AM	#2
humfrz Senior Member Join Date: May 2013 Drives: 2013 FR-S, white, MT Location: Puyallup, WA Posts: 30,432 Thanks: 29,826 Thanked 32,845 Times in 16,844 Posts Mentioned: 715 Post(s) Tagged: 2 Thread(s)	Well now, I don't have a head apart ..... but, what's your question, maybe someone can help..... humfrz

09-13-2016, 08:23 AM	#4
puma crew chief Join Date: Mar 2014 Drives: Race car FR-S Location: Quebec Posts: 378 Thanks: 6 Thanked 189 Times in 82 Posts Mentioned: 14 Post(s) Tagged: 0 Thread(s)	Correct! Here is my question, sent the heads to get resurfaced and didn't know the part of the lifter in the head could be removed, they came back all in a bag and now i don't know which one goes where. There are 2 types, one that has a bigger hole and one that has a smaller hole. From the part numbers it seems like one is made to go LH and the other RH but which goes where, they fit in both holes. My car is a 13, it seems like in 14 they are all the same. Anyone knows if the small holes go on the right or on left?

09-13-2016, 02:46 PM	#5
humfrz Senior Member Join Date: May 2013 Drives: 2013 FR-S, white, MT Location: Puyallup, WA Posts: 30,432 Thanks: 29,826 Thanked 32,845 Times in 16,844 Posts Mentioned: 715 Post(s) Tagged: 2 Thread(s)	Well now ........ I don't know ........ but I would GUESS that they are different because one type is for the exhaust valves, the other type for the intake valves ...... just guessing ...... really. humfrz

09-13-2016, 03:17 PM	#8
puma crew chief Join Date: Mar 2014 Drives: Race car FR-S Location: Quebec Posts: 378 Thanks: 6 Thanked 189 Times in 82 Posts Mentioned: 14 Post(s) Tagged: 0 Thread(s)	nan from the parts list it (that we can't see clearly now i realise it) says one is for the right bank and the other is for the left bank, i just don't know which is which. I decided to wait an ordered one from Toyota since they could get it tomorrow, then i will know which one goes where.

09-13-2016, 06:31 PM	#10
puma crew chief Join Date: Mar 2014 Drives: Race car FR-S Location: Quebec Posts: 378 Thanks: 6 Thanked 189 Times in 82 Posts Mentioned: 14 Post(s) Tagged: 0 Thread(s)	yeah that is exactly it! Nigel if you can help me out and tell me which goes in the left and which on the right that would be good.

09-13-2016, 10:05 PM	#14
puma crew chief Join Date: Mar 2014 Drives: Race car FR-S Location: Quebec Posts: 378 Thanks: 6 Thanked 189 Times in 82 Posts Mentioned: 14 Post(s) Tagged: 0 Thread(s)	Oh ok thought mention was enough, just sent him a PM, thanks guys.

User Name		Remember Me?
Password