|
![]() |
|
Thread Tools | Search this Thread |
![]() |
#1 |
Member
Join Date: Jul 2015
Drives: Honda Fit GE
Location: Northern California
Posts: 25
Thanks: 1
Thanked 2 Times in 2 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Brembo GT 6 Piston Yellow Caliper with 355mm Type 3 rotor kit Part# 1M3.8047A5
I am selling my Brembo GT 6 Piston Yellow Caliper with 355mm Type 3 rotor kit (The Gran Turismo Kit)
This is a kit with Part# 1M3.8047A5, which, at the time, I bought was the kit-specific part# for the first-generation BRZ. Brembo now has a new Part# 1M3.8069A5, which works for both the first and second-generation BRZ, so logically, my kit with Part# 1M3.8047A5 should also work for the second-generation BRZ (but since I have never seen the kit with newer part#, I cannot guarantee that my kit will fit second-generation BRZ). I used this kit for my Honda Fit, (yes, not a typo, it's Honda Fit) for the past few years, using a custom rotor hat and custom caliper bracket so please note the following: a. The original rotor hat for BRZ is still brand new and has never been used. b. The original caliper bracket for BRZ is still brand new and has never been used. c. You will need to purchase 2 sets of Brembo Part# 915503 Disc Hardware Pack (because you need 1 set per disc) to remount the 355mm Type 3 rotor to the brand new BRZ rotor HAT. Here is the link to purchase this hardware pack: https://www.turnermotorsport.com/p-302241-tms302241/ . It 's not expensive, only $90 per kit. This is a 1 time use hardware, so for safety, I will NOT include the used hardware pack. It's basically some bolts, nuts, and floating mechanism hardware. d. The original Goodridge braided lines that came with the kit are not included (any good front braided line kit should work) e. The 4 bolts holding the bracket to the car knuckle are also not included (just buy some grade 12.9 metric bolts to replace them) f. The disk brake rotor might need to be resurfaced around the outer edges. Due to the size limitation on my Honda Fit, I had to mount the caliper about 1mm lower than it should so the brake pads did not wear out a 1mm area of the disk brake's outer edges. A machined shop can do this easily. You can see the outer edge pointed out by my finger in the picture (link) right below: https://photos.app.goo.gl/vmY33LEYSPbD5DQKA I am selling this kit, including all the original double boxes from Brembo and the user manual, for just $2,060, including shipping to anywhere inside the USA via PayPal. Please review all the pictures below. What you see is what you get. I do not accept returns, so please make sure to review the pictures before you buy. My price is firm, Please send me a PM (Private Messages if you are interested). Somehow, I cannot directly link an image here so I am forced to used webpage links that you can click to view the pictures. The first picture in the first link below show a picture with my username, date, and FT86club.com written on a piece of white paper beside the outer box of the Brembo: https://photos.app.goo.gl/QGVZzTm9vbgAZCwJ7 You can also see 24 pictures that I listed on my eBay listing. Here is the link to my eBay listing: https://www.ebay.com/itm/204757169643 Link to pictures below: https://photos.app.goo.gl/8JGFzYBVXhofSA8M6 https://photos.app.goo.gl/ihGfzCjgWQ6aXaQC7 https://photos.app.goo.gl/UgeuYg2mqamcHRNk8 https://photos.app.goo.gl/GhheavpQmqk5yk5TA https://photos.app.goo.gl/hpZSVxvzyENhc3478 https://photos.app.goo.gl/iZETe2YU15WXfoR7A https://photos.app.goo.gl/ZuVPS1LvHR5277G19 https://photos.app.goo.gl/NpAB8qQs9nCoKL8a6 More picture links further below (next posts): Last edited by BMW Alpina; 04-22-2024 at 11:20 PM. |
![]() |
![]() |
The Following User Says Thank You to BMW Alpina For This Useful Post: | ric342 (06-13-2024) |
![]() |
#2 |
Member
Join Date: Jul 2015
Drives: Honda Fit GE
Location: Northern California
Posts: 25
Thanks: 1
Thanked 2 Times in 2 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Somehow, I cannot directly link an image here so I am forced to used webpage links that you can click to view the pictures:
Caliper Brackets still brand new, never used: https://photos.app.goo.gl/GMSEt4hEbuBCi3tt8 and https://photos.app.goo.gl/dWhDg4esWp22s8vt9 Pictures of RIGHT Brake Caliper: https://photos.app.goo.gl/7DDagPQXSYA9VhoP6 https://photos.app.goo.gl/qj7TKKD65JA5myjv6 https://photos.app.goo.gl/wzk5EH7QpUBxxARq9 https://photos.app.goo.gl/YSYmt1e7FSm82qgp6 https://photos.app.goo.gl/K1U8EUXEpTM3YaNa9 https://photos.app.goo.gl/T663RVDU38tA9kAo9 https://photos.app.goo.gl/vLx1CjyFfd49L6vU8 https://photos.app.goo.gl/pAeCnD5eL8fYKevMA Last edited by BMW Alpina; 04-22-2024 at 11:27 PM. |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Jul 2015
Drives: Honda Fit GE
Location: Northern California
Posts: 25
Thanks: 1
Thanked 2 Times in 2 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Pictures of the LEFT Caliper:
https://photos.app.goo.gl/feZJZqMpqpwRTSiYA https://photos.app.goo.gl/Q7fVvrhtefq3LxbW8 https://photos.app.goo.gl/FmfBNeLMedWC6RnPA https://photos.app.goo.gl/HpCGTBgcLUR9mk8q7 https://photos.app.goo.gl/68w9Ru4gXdAFMujk6 https://photos.app.goo.gl/1PNBMHquwq1npZxF8 https://photos.app.goo.gl/VHxkjQMK6Vny3k286 https://photos.app.goo.gl/fx7FVb7AZf9JSoX89 More pictures below: Last edited by BMW Alpina; 04-22-2024 at 11:32 PM. |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Jul 2015
Drives: Honda Fit GE
Location: Northern California
Posts: 25
Thanks: 1
Thanked 2 Times in 2 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Here are the brake pads, and hardware to install the brake pads to the calipers:
https://photos.app.goo.gl/xRvYogjioCtMTD9f6 https://photos.app.goo.gl/bQ4DDviJDJmpfLfx9 https://photos.app.goo.gl/JbdWz5hUVN2Gi7b59 I will ship everything using the Original DOUBLE box packaging from Brembo (and each side has it's own double boxes). This brown boxes are the outer boxes: https://photos.app.goo.gl/eEF5NdxWcy6WgcoFA These colorful carton boxes below are the inner boxes: https://photos.app.goo.gl/hiXVhArqd6KZqZo6A User Manual are included: https://photos.app.goo.gl/yQxzu1Y3ghmaGQfUA My price is firm, Please send me a PM (Private Messages if you are interested). Last edited by BMW Alpina; 04-22-2024 at 11:36 PM. |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jul 2022
Drives: Toyota GT86
Location: Ireland
Posts: 553
Thanks: 484
Thanked 382 Times in 240 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
All those links require having a Ducati account....
__________________
SpareRoomRacing Youtube: https://www.youtube.com/@spareroomracing3168/featured Build Thread: https://www.ft86club.com/forums/showthread.php?t=153004
|
![]() |
![]() |
The Following 3 Users Say Thank You to autoracer86 For This Useful Post: |
![]() |
#6 |
Member
Join Date: Jul 2015
Drives: Honda Fit GE
Location: Northern California
Posts: 25
Thanks: 1
Thanked 2 Times in 2 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Thank you for letting me know @autoracer86 Oh no... hmmm, ok, I will try to upload to Google Photo later tonight when I return from office. I also listed on eBay if you want to see some of the pictures there. (24 pictures on eBay listing), and here is the link to my eBay listing: https://www.ebay.com/itm/204757169643 |
![]() |
![]() |
The Following User Says Thank You to BMW Alpina For This Useful Post: | autoracer86 (04-22-2024) |
![]() |
#7 |
Member
Join Date: Jul 2015
Drives: Honda Fit GE
Location: Northern California
Posts: 25
Thanks: 1
Thanked 2 Times in 2 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
I have updated all links to the pictures, now using Google Photo links.
If you are still having issues, you can click on my eBay listing to see their pictures (I posted 24 pictures on eBay): https://www.ebay.com/itm/204757169643 |
![]() |
![]() |
![]() |
#8 |
Member
Join Date: Jul 2015
Drives: Honda Fit GE
Location: Northern California
Posts: 25
Thanks: 1
Thanked 2 Times in 2 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Bump Up
|
![]() |
![]() |
![]() |
#9 |
Member
Join Date: Jul 2015
Drives: Honda Fit GE
Location: Northern California
Posts: 25
Thanks: 1
Thanked 2 Times in 2 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Bump Up
|
![]() |
![]() |
![]() |
#10 |
Member
Join Date: Jul 2015
Drives: Honda Fit GE
Location: Northern California
Posts: 25
Thanks: 1
Thanked 2 Times in 2 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Bump Up
|
![]() |
![]() |
|
|
![]() |
Tags |
6 piston, bbk, big brake kit, brembo, gran turismo |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Removing rear knuckle while rotor/caliper is still on - possible? | series.trackday | Mechanical Maintenance (Oil, Fluids, Break-In, Servicing) | 3 | 06-26-2023 03:30 PM |
BRZ Brembo rotor interchangable with STI Brembo? | LatentWagen | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 4 | 08-05-2021 08:28 AM |
08+ STI rear Brembo caliper and rotor question | Teratorry | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 5 | 09-20-2020 02:42 AM |
Alcon Front Brake Kit, 4-piston 332x28mm Rotor Size - now available!! | FRSport.com | Brakes, Suspension, Chassis | 0 | 07-08-2016 07:14 PM |