|
Suspension | Chassis | Brakes -- Sponsored by 949 Racing Relating to suspension, chassis, and brakes. Sponsored by 949 Racing. |
![]() |
|
Thread Tools | Search this Thread |
![]() |
#1 |
Junior Member
Join Date: Sep 2016
Drives: 2017 Brz
Location: washington
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
![]()
Help, i recently installed LCAs and rear toe arms, i then got an alignment at a custom shop (before measurements) then took it to firestone and got it aligned (actual measurements). The problem i am having is while turning left or right on a curve the car starts to lose traction and the traction control light flashes.
was not doing this before the install and alignment. would this be something with the parts i put on or the alignment. i have taken the car on these roads many times and never lost traction at higher speeds than i am now. The car is on bc racing coilovers which ive been running for about 4 years. any help is greatly appreciated! ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Feb 2014
Drives: 2023 BRZ
Location: Denver, CO
Posts: 1,816
Thanks: 1,489
Thanked 1,262 Times in 683 Posts
Mentioned: 34 Post(s)
Tagged: 2 Thread(s)
|
For what it's worth I typically run about one degree of camber more in the front than the rear. I suspect your car is under steering badly.
__________________
Director of Rocky Mountain 86CUP
|
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: May 2011
Drives: '23 BRZ
Location: Providence, RI
Posts: 4,604
Thanks: 1,388
Thanked 3,920 Times in 2,046 Posts
Mentioned: 85 Post(s)
Tagged: 0 Thread(s)
|
"Actuals" are current, right?
If measurements are accurate, your rear toe-in was WAY off before, 1.3 degrees total is insane! Nothing I'm seeing in your current alignment looks off, but you might see if you can check at another shop to confirm. Did you get LCAs to reduce rear camber? Looks like they evened rear camber out left/right but toward the higher end a bit. Not that I think 3 degrees should give you any problems, but for street car you might want more like -1.5 to -2 degrees. |
![]() |
![]() |
![]() |
#4 |
30 minute maintenance
Join Date: Oct 2020
Drives: My18 wrxsti My19 brzts
Location: Botany Bay
Posts: 1,153
Thanks: 749
Thanked 1,200 Times in 616 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
|
If you took it to a custom shop and got an alignment why did you get another at Firestone. Unless you mean you got it measured at a custom shop first.
Seems like they only adjusted some toe as its all over the place. What specs did you ask them for? It`s not even in their specs. Higher quality picture helps |
![]() |
![]() |
![]() |
#5 | |
Junior Member
Join Date: Sep 2016
Drives: 2017 Brz
Location: washington
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
![]() |
![]() |
![]() |
#6 | |
Junior Member
Join Date: Sep 2016
Drives: 2017 Brz
Location: washington
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
the before was from the custom shops first alignment sadly they didnt have any info on the before, they didnt even give me a alignment sheet after. was a bad shop i regret it but i guess you live and you learn. |
|
![]() |
![]() |
![]() |
#7 |
Junior Member
Join Date: Sep 2016
Drives: 2017 Brz
Location: washington
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
i went for a drive without tc on, dont know if it was smart or not, but the car drove basically perfect didnt feel anything weird, thinking the sensor got messed up during install maybe? all i can really think of at this point.
|
![]() |
![]() |
![]() |
#8 |
30 minute maintenance
Join Date: Oct 2020
Drives: My18 wrxsti My19 brzts
Location: Botany Bay
Posts: 1,153
Thanks: 749
Thanked 1,200 Times in 616 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
|
The wheel alignment is not good the car would not be balanced. It needs to be set up within its adjustment parameters properly front to rear. Apart from a problem. Like i asked
you what specs did you ask for |
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: Jun 2017
Drives: BRZ Yellow, 2019 Ranger, 2011 Evora
Location: Dallas
Posts: 1,694
Thanks: 352
Thanked 1,482 Times in 776 Posts
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
|
Ok some simple questions, Tires worn evenly? Tire pressures even?
Your camber is not matched well in the front, to much camber in the back(my opinion) |
![]() |
![]() |
|
|
![]() |
Tags |
alignment, coil overs, grip, help me, suspension |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Can someone please check my alignment specs? | boring86 | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 6 | 08-28-2019 09:50 AM |
Camber/alignment for Eibach Prokit and when should I get alignment? | Meanderchap | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 3 | 02-01-2016 03:44 AM |
DIY alignment - quick way to set alignment while new suspension settles? | 1Cor10:23 | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 6 | 12-11-2014 09:53 PM |
Need Serious Alignment Check, Suspension Damage? | Staf00 | Southern California | 6 | 05-29-2014 11:49 PM |
Alignment Sanity Check | FRSFirestorm | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 3 | 05-16-2013 07:18 AM |