...another... Throttle Body Thread - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

DIE1000DEATHS · 09-30-2016, 03:52 PM

First... I searched...both here and the innerwebz (I couldn't find a translate-able website)

Any info on some of the new throttle bodies out there?? Ankglid, R Magic, and Auto Craft have some out listed from about $350-$600.

I can't seem to find any specs/info.

Here's a like just for reference, if this is against the rules I'll delete the link. No affiliation and not selling anything..

https://www.vividracing.com/catalog/...8=1573&c9=6106

gramicci101 · 09-30-2016, 03:57 PM

Cusco makes an actual larger throttle body. What do you hope to gain with one, though?

http://www.ft86speedfactory.com/cusc...-body-329.html

Shady195 · 09-30-2016, 03:58 PM

0 need for one.

BRZoomTX · 09-30-2016, 04:30 PM

There really are no gains to be had from a bored out throttlebody on these cars.

2mm overbore for $1,500? I feel bad for anyone who actually bought that.

Dr. BRZ · 09-30-2016, 05:20 PM

i bought a throttle body spacer for $60, brand new and i gained 2hp and 2tq. for $60, thats not a bad deal, plus all numbers add up.

Summerwolf · 09-30-2016, 06:20 PM

Quote:

Originally Posted by Dr. BRZ

i bought a throttle body spacer for $60, brand new and i gained 2hp and 2tq. for $60, thats not a bad deal, plus all numbers add up.

Lol, nice one.

Dipstik-sportech · 09-30-2016, 06:28 PM

Quote:

Originally Posted by Dr. BRZ

i bought a throttle body spacer for $60, brand new and i gained 2hp and 2tq. for $60, thats not a bad deal, plus all numbers add up.

I highly doubt you gained 2hp from a spacer on this car. More than likely it was different conditions on they dyno that gave you the increase. These cars show zero gains from spacers even if you're boosted

Captain Snooze · 09-30-2016, 06:36 PM

Quote:

Originally Posted by Captain Snooze

Approximately 40mm -> 19hp gain
so 12 meters equals approximately............ 5,700 hp @ 4 rpm!!!!!
Name: attachment.jpg
Views: 2371
Size: 13.0 KB

.

Decay107 · 09-30-2016, 07:02 PM

Another option,

http://www.ft86club.com/forums/showp...3&postcount=66

we bench racers over in the NW section think it would only offer gains on a positive displacement SC setup (or anything where the compressor is post throttle body). This is why I believe the TRD SC used a Tundra throttle body.

DIE1000DEATHS · 10-02-2016, 09:56 AM

Quote:

Originally Posted by gramicci101

Cusco makes an actual larger throttle body. What do you hope to gain with one, though?

http://www.ft86speedfactory.com/cusc...-body-329.html

I'm aware of the Cusco model, and it's minimal increase..

And what does anyone hope to gain with engine mods...???

DIE1000DEATHS · 10-02-2016, 10:00 AM

Quote:

Originally Posted by Decay107

Another option,

http://www.ft86club.com/forums/showp...3&postcount=66

we bench racers over in the NW section think it would only offer gains on a positive displacement SC setup (or anything where the compressor is post throttle body). This is why I believe the TRD SC used a Tundra throttle body.

Well... I happen to be running the Sprintex 335 s/c with a higher boost pulley on a built motor. So indeed I am in the situation that would most likely benefit. I'm trying to suck in as much air as needed, without restriction.

And thanks for the link! I'll research...

justinh77 · 10-28-2016, 12:33 AM

grams makes a cheaper one and delivers 48%more airflow SO THEY SAY http://www.ft86speedfactory.com/gram...l#.WBLUD-Dx7IW

Irace86 · 10-28-2016, 02:22 AM

Quote:

Originally Posted by DIE1000DEATHS

Well... I happen to be running the Sprintex 335 s/c with a higher boost pulley on a built motor. So indeed I am in the situation that would most likely benefit. I'm trying to suck in as much air as needed, without restriction.

And thanks for the link! I'll research...

Are you maxed out on pulley size? Meaning, couldn't you just buy a smaller pulley? Wouldn't that be the cheapest route?

celek · 10-28-2016, 09:25 AM

I see all these throttle bodies and realize that the narrow runners are the problem.
Anyone else realize this as well?
I mean the 2017 manifold with larger diameter runners gains more with a stock throttle body.

09-30-2016, 03:52 PM	#1
DIE1000DEATHS TechNINJA Join Date: Jun 2012 Drives: Whiteout MT, 87 Mustang, 09 RUCKUS Location: Detroit, Murder Mitten Posts: 130 Thanks: 73 Thanked 46 Times in 27 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	...another... Throttle Body Thread First... I searched...both here and the innerwebz (I couldn't find a translate-able website) Any info on some of the new throttle bodies out there?? Ankglid, R Magic, and Auto Craft have some out listed from about $350-$600. I can't seem to find any specs/info. Here's a like just for reference, if this is against the rules I'll delete the link. No affiliation and not selling anything.. https://www.vividracing.com/catalog/...8=1573&c9=6106

09-30-2016, 04:30 PM	#4
BRZoomTX Senior Member Join Date: Mar 2015 Drives: '13 BRZ Location: Texas Posts: 362 Thanks: 179 Thanked 235 Times in 149 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	There really are no gains to be had from a bored out throttlebody on these cars. 2mm overbore for $1,500? I feel bad for anyone who actually bought that. __________________ '13 WRB BRZ ~470whp // Instagram // YouTube

09-30-2016, 07:02 PM	#9
Decay107 Turning is for Nerds Join Date: Aug 2013 Drives: 35 characters is not enough Location: PDX Posts: 1,974 Thanks: 836 Thanked 1,259 Times in 717 Posts Mentioned: 186 Post(s) Tagged: 3 Thread(s)	Another option, http://www.ft86club.com/forums/showp...3&postcount=66 we bench racers over in the NW section think it would only offer gains on a positive displacement SC setup (or anything where the compressor is post throttle body). This is why I believe the TRD SC used a Tundra throttle body. __________________ My build thread / journal / evidence for warranty claim denial Motorcycle build thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: FA20/4U-GSE Throttle body	Simply_the_best	Want-To-Buy Requests	1	01-11-2016 03:02 PM
WTB FRS/BRZ Throttle Body	Tboxer	Want-To-Buy Requests	3	12-01-2014 12:13 PM
WTB: OEM fa20 Throttle Body	1stGenBRZ86	Want-To-Buy Requests	0	01-28-2014 02:51 AM

09-30-2016, 03:57 PM	#2
gramicci101 Off Topic Join Date: Feb 2014 Drives: 2014 Subaru BRZ Limited Location: Vegas, baby! Posts: 4,610 Thanks: 2,369 Thanked 4,243 Times in 2,170 Posts Mentioned: 43 Post(s) Tagged: 3 Thread(s)	Cusco makes an actual larger throttle body. What do you hope to gain with one, though? http://www.ft86speedfactory.com/cusc...-body-329.html

09-30-2016, 03:58 PM	#3
Shady195 Senior Member Join Date: Jun 2014 Drives: '13 10 Series FRS #1203 Location: Albany, NY Posts: 850 Thanks: 7 Thanked 385 Times in 220 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	0 need for one.

10-28-2016, 12:33 AM	#12
justinh77 Member Join Date: Oct 2016 Drives: pearl white scion frs 2014 Location: hamilton ontario Posts: 60 Thanks: 2 Thanked 6 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	grams makes a cheaper one and delivers 48%more airflow SO THEY SAY http://www.ft86speedfactory.com/gram...l#.WBLUD-Dx7IW

User Name		Remember Me?
Password