|
Suspension | Chassis | Brakes -- Sponsored by 949 Racing Relating to suspension, chassis, and brakes. Sponsored by 949 Racing. |
|
Thread Tools | Search this Thread |
09-25-2023, 09:13 AM | #1 |
Senior Member
Join Date: Apr 2020
Drives: 2018 BRZ
Location: Dayton, OH
Posts: 906
Thanks: 1,373
Thanked 769 Times in 436 Posts
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
|
Rate my brake dust boots
After about 400 miles on track, my front dust boots are starting to look bad. Rears look fine. How urgent is replacing them? Any options that will handle heat better? Or do I have to go BBK/cooling ducts/etc.?
Stock non-PP calipers, G-Loc R10 pads, not using shims/backing plate from the street pads (i.e. just the R10 pads directly). Left and right sides look about the same. Stock drivetrain. Front R10 pads are about half-way worn (~5 mm left). Car is daily driven all year with some snow and salt in winter. |
The Following User Says Thank You to Ohio Enthusiast For This Useful Post: | DocWalt (09-25-2023) |
09-25-2023, 12:12 PM | #2 |
Senior Member
Join Date: Jul 2022
Drives: Toyota GT86
Location: Ireland
Posts: 437
Thanks: 382
Thanked 288 Times in 187 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
The AP racing bbk don't run dust boots so maybe they are not that important ha.
__________________
2014 GT86 Orange 6 Speed https://www.youtube.com/@spareroomracing3168/featured Build Thread: https://www.ft86club.com/forums/showthread.php?t=153004
|
09-25-2023, 12:32 PM | #3 |
Senior Member
Join Date: Apr 2020
Drives: 2018 BRZ
Location: Dayton, OH
Posts: 906
Thanks: 1,373
Thanked 769 Times in 436 Posts
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
|
Yeah, I read that many BBKs don't use dust boots and are not recommended for street use, particularly in winter with salt present on the roads. I'm sure plenty of folks run them on the street, though, so I don't know how important it truly is...
|
09-25-2023, 12:58 PM | #4 |
Senior Member
Join Date: Oct 2013
Drives: 2013 BRZ, 2023 Model 3
Location: SF Bay Area
Posts: 2,296
Thanks: 1,212
Thanked 863 Times in 570 Posts
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
|
So even though those outer rubber boots are cracking, there are o-rings underneath that also provide a seal.
I’d say you’re fine for another track day, but for the price of replacement calipers I’d say just replace them for the peace of mind. https://www.ebay.com/itm/12421678108...mis&media=COPY |
The Following User Says Thank You to norcalpb For This Useful Post: | Ohio Enthusiast (09-25-2023) |
09-25-2023, 01:05 PM | #5 |
Senior Member
Join Date: Oct 2013
Drives: '22 BRZ
Location: PA
Posts: 1,833
Thanks: 2,299
Thanked 1,472 Times in 767 Posts
Mentioned: 24 Post(s)
Tagged: 2 Thread(s)
|
Those look fine. Run them until they fall apart.
If you're not driving in salt, they'll last a long time if you clean the pistons off before compressing them.
__________________
|
The Following User Says Thank You to DocWalt For This Useful Post: | Ohio Enthusiast (09-25-2023) |
09-25-2023, 01:08 PM | #6 |
Join Date: Jul 2012
Drives: S2000 CR
Location: Orange County
Posts: 14,531
Thanks: 8,920
Thanked 14,177 Times in 6,835 Posts
Mentioned: 966 Post(s)
Tagged: 14 Thread(s)
|
Those are fine. When you have a chance physically feel them for hardness/brittleness.
What you don't want is a hardened seal getting caught. You can slow the degradation down using pads that fundamentally run cooler. |
The Following 2 Users Say Thank You to CSG Mike For This Useful Post: | kevaughan (04-23-2024), Ohio Enthusiast (09-25-2023) |
09-25-2023, 01:37 PM | #7 |
Senior Member
Join Date: Apr 2020
Drives: 2018 BRZ
Location: Dayton, OH
Posts: 906
Thanks: 1,373
Thanked 769 Times in 436 Posts
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
|
|
09-25-2023, 01:52 PM | #8 | ||
Join Date: Jul 2012
Drives: S2000 CR
Location: Orange County
Posts: 14,531
Thanks: 8,920
Thanked 14,177 Times in 6,835 Posts
Mentioned: 966 Post(s)
Tagged: 14 Thread(s)
|
Quote:
Try the CSG C21/C11 pairing. Ask for temperature paint on the pads when you order to verify for yourself. From another post: Quote:
|
||
The Following User Says Thank You to CSG Mike For This Useful Post: | Ohio Enthusiast (09-25-2023) |
09-26-2023, 09:02 PM | #9 |
Wheels for Brains
Join Date: May 2017
Drives: '14 FR-S [37J] | Daily/Track
Location: Los Angeles
Posts: 888
Thanks: 111
Thanked 568 Times in 363 Posts
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
|
Seem fine. I like to rebuild after every 15-20 events. It's easy enough to do and Subaru/Toyota have kits with all the seals+goop you need; recommend buying another set of base calipers so you don't have any downtime between rebuilds
I would say, if they ever develop a hole, just cut the boot off until you have time to rebuild the calipers. A hole causes the boot to trap more debris than it keeps away |
The Following 2 Users Say Thank You to EndlessAzure For This Useful Post: | kevaughan (Yesterday), Ohio Enthusiast (09-26-2023) |
09-26-2023, 10:04 PM | #10 |
Senior Member
Join Date: Apr 2020
Drives: 2018 BRZ
Location: Dayton, OH
Posts: 906
Thanks: 1,373
Thanked 769 Times in 436 Posts
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
|
|
09-28-2023, 05:55 AM | #11 |
Wheels for Brains
Join Date: May 2017
Drives: '14 FR-S [37J] | Daily/Track
Location: Los Angeles
Posts: 888
Thanks: 111
Thanked 568 Times in 363 Posts
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
|
|
The Following User Says Thank You to EndlessAzure For This Useful Post: | Ohio Enthusiast (09-28-2023) |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
do the “Performance Pack” Brembos have dust boots? | pkennethv | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 1 | 08-18-2021 04:40 PM |
Steering Rack Dust Boots Melted. Replacement? | mistople | Mechanical Maintenance (Oil, Fluids, Break-In, Servicing) | 2 | 08-20-2019 12:34 PM |
Calipers without dust boots | toast | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 16 | 01-15-2016 01:27 PM |
OEM Springs and Dust boots - Free Shipping | stefmiesterb | Brakes, Suspension, Chassis | 4 | 03-31-2015 07:03 PM |
Shifter dust boots - $15.00 Shipped | SilentMike | Transmission and Driveline | 4 | 05-18-2014 02:43 PM |