[TX] DFW General Discussion - Page 98 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

pleong · 08-26-2015, 09:24 AM

Quote:

Originally Posted by Jrezaf

Yes, and there lies the problem. I'm going to have to reconnect it afterwards, anyway. Soooo... anyone know of a custom shop in Dallas that can/has worked with this before? I'd rather have someone do it right (the disconnect/reconnect and replacement of panels, etc).

I'm willing to bet it runs all the way to the headunit.. try earmark.. they're a bit pricey but they do good clean work. I've gone to them for my alarm on my old supra.

Another option, which I probably wouldn't recommend is just cutting the wire and soldering it back together when you're done and using heat shrink around that area you cut.. but again, I probably wouldn't recommend it. But it IS a quicker fix.

Jrezaf · 08-29-2015, 09:42 PM

So I took my BRZ to Earmark, where a guy there said they were booked for 3 weeks for any work. He did give me a suggestion: to pull out the camera and wire a bit, then cut the license plate screw notch to the edge and just take it out that way, and do the same to the license plate I was to put it. Took his advice, and it worked! New custom license plate set up and all.

Bramick · 09-02-2015, 06:51 AM

Quote:

Originally Posted by Jrezaf

So I don't know if this is the right place to post this, but I recently moved to Dallas and just got my Texas plates, and was looking to change em out before I realized that my BeatSonic rear view camera is in my way. I didn't install it myself, and attempted to remove some panels and such to follow the wiring before deciding I better leave it to someone who knows what they're doing before I mess something up. As embarrassing as this is to ask, does anyone recommend a place around here I can go to help me get my plates changed given the presence of my rearview camera?

U see this? http://www.ft86club.com/forums/showthread.php?t=30144

Zooner · 09-22-2015, 06:54 AM

If anyone is interested. for sale 2015 Scion FRS

http://www.ft86club.com/forums/showp...&postcount=873

carbonBLUE · 12-11-2015, 05:54 PM

So my company is building Toyota's new head quarters in Plano. Woot I did a proper drift out of the parking lot at lunch today.

malubawla · 01-09-2016, 11:28 AM

Anybody care to share what they think are good alignment settings for a daily driver? I'm running -2.0 F and -1.5 R.

Bramick · 01-10-2016, 11:33 AM

Quote:

Originally Posted by malubawla

Anybody care to share what they think are good alignment settings for a daily driver? I'm running -2.0 F and -1.5 R.

I believe this is also what @GSpeed recommended.

jph11 · 01-10-2016, 06:17 PM

Anyone have an extra 2.5 inch vband clamp. Had mine ripped off in the car wash today 😑 left my mid pipe just hanging

FR-S Runner · 01-26-2016, 11:26 AM

I am looking for the oem front license plate bracket / hardware. Let me know if I can have yours or I can buy it off you. I'm in Garland and can go to the monthly meet.

raptorhunter89 · 01-26-2016, 12:31 PM

Quote:

Originally Posted by FR-S Runner

I am looking for the oem front license plate bracket / hardware. Let me know if I can have yours or I can buy it off you. I'm in Garland and can go to the monthly meet.

What's the info on the Monthly meet?

Shneegle · 01-26-2016, 12:35 PM

Quote:

Originally Posted by raptorhunter89

What's the info on the Monthly meet?

http://www.ft86club.com/forums/showthread.php?t=83042

malubawla · 01-26-2016, 04:12 PM

Quote:

Originally Posted by FR-S Runner

I am looking for the oem front license plate bracket / hardware. Let me know if I can have yours or I can buy it off you. I'm in Garland and can go to the monthly meet.

I have one never used. I live in Carrollton, but work in richardson/dallas near 75 and 635. Pm me

raptorhunter89 · 01-26-2016, 06:05 PM

Quote:

Originally Posted by Shneegle

http://www.ft86club.com/forums/showthread.php?t=83042

appreciate it

brybot · 01-26-2016, 08:37 PM

Quote:

Originally Posted by FR-S Runner

I am looking for the oem front license plate bracket / hardware. Let me know if I can have yours or I can buy it off you. I'm in Garland and can go to the monthly meet.

You already have holes in the mustache or are you going to drill them? Keep in mind there are a couple of options for not drilling. Just sayin'.

12-11-2015, 05:54 PM	#1363
carbonBLUE Reverse Burnouts Join Date: Oct 2011 Drives: 2013 Argento FRS Location: dallas!!! Posts: 2,894 Thanks: 707 Thanked 1,257 Times in 592 Posts Mentioned: 30 Post(s) Tagged: 1 Thread(s)	So my company is building Toyota's new head quarters in Plano. Woot I did a proper drift out of the parking lot at lunch today. __________________ 2000 Carbon Blue Toyota Celica GTS 152000 miles (wont forget you) 2013 Argento Scion FR-S 2011 Infiniti G37x

01-09-2016, 11:28 AM	#1364
malubawla poor man's evora Join Date: Dec 2012 Drives: Turbod BRZ Location: Dallas Posts: 620 Thanks: 42 Thanked 190 Times in 137 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Anybody care to share what they think are good alignment settings for a daily driver? I'm running -2.0 F and -1.5 R. __________________ my build thread http://www.ft86club.com/forums/showthread.php?t=77434

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gundam Universe - General All Discussion Thread	poormans_LFA	Off-Topic Lounge [WARNING: NO POLITICS]	273	03-24-2014 12:45 AM
2013 FR-S Info Sheet (General Facts)	xravexboix	Scion FR-S / Toyota 86 GT86 General Forum	10	04-29-2012 06:12 PM
General info on the 86 translated from Toyota Japan	WTF	Scion FR-S / Toyota 86 GT86 General Forum	14	02-24-2012 06:57 PM
Push button start general question	maxeveland	Other Vehicles & General Automotive Discussions	9	02-14-2012 11:13 AM
General FT-86 musings around the world	Axel	Scion FR-S / Toyota 86 GT86 General Forum	2	01-01-2010 11:29 PM

08-29-2015, 09:42 PM	#1360
Jrezaf Junior Member Join Date: Jun 2014 Drives: 2015 Series.Blue Location: Los Angeles Posts: 7 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	So I took my BRZ to Earmark, where a guy there said they were booked for 3 weeks for any work. He did give me a suggestion: to pull out the camera and wire a bit, then cut the license plate screw notch to the edge and just take it out that way, and do the same to the license plate I was to put it. Took his advice, and it worked! New custom license plate set up and all.

01-10-2016, 06:17 PM	#1366
jph11 Member Join Date: Feb 2015 Drives: Still deciding Location: Dallas Tx Posts: 94 Thanks: 18 Thanked 27 Times in 12 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Anyone have an extra 2.5 inch vband clamp. Had mine ripped off in the car wash today 😑 left my mid pipe just hanging

01-26-2016, 11:26 AM	#1367
FR-S Runner Member Join Date: May 2015 Drives: 2013 FR-S Whiteout Location: Garland, TX Posts: 15 Thanks: 0 Thanked 3 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I am looking for the oem front license plate bracket / hardware. Let me know if I can have yours or I can buy it off you. I'm in Garland and can go to the monthly meet.

User Name		Remember Me?
Password