Cusco Throttle Body?

[Turdinator]

Originally Posted by cslntuee

Will this works with the factory ECU?

Thanks.

I believe its plug and play. But i am sure it will benifit from a tune like most mods.

[NYCsubaruBRZ]

Originally Posted by dabocx

76mm stock or 3inches

This unit is 78mm for 1700

My offer still stands, ill port and polish them for alot less lol

LOL i get that. i ment cost. what is the price of a stock tb? i would want to purchase a spare to have a stock tb to keep with all of the original parts in case id like to go back to stock.

[troek]

theres quite a few tuning company's here in japan that will machine them out and replace the butterfly for like 400 dollars. im sure somewhere in the states will.

[NYCsubaruBRZ]

Originally Posted by troek

theres quite a few tuning company's here in japan that will machine them out and replace the butterfly for like 400 dollars. im sure somewhere in the states will.

does that include the core?

i can get it p&p over here in ny but i would like to buy a stock tb to maintain all of the original parts.

if need / want to swap back to stock i keep all of the stock parts in my garage.

so what is the price of the stock tb?

thanks

[stevo_12v]

Originally Posted by Turdinator

IF I was going to do it i would look at the TODA TB well before the CUSCO one. Its cheaper and they taper the bore as well. It also mentions the stock throttle plate is 65mm and they enlarge it to 68mm.

LINK

Thanks man, my N/A build was running out of stuff to buy, LOL

[86fab]

Someone find me the cheapest price they can find on this procedure and I will beat it. I have a cnc mill and can do whatever bore you would wish to see. Just send me your core and I'll bore it and put in a new plate and get it back to you so we can see what the true results are!

[Summerwolf]

Originally Posted by 86fab

Someone find me the cheapest price they can find on this procedure and I will beat it. I have a cnc mill and can do whatever bore you would wish to see. Just send me your core and I'll bore it and put in a new plate and get it back to you so we can see what the true results are!

Are you looking for a guinea pig or have you done this on your own car already?

[Simply_the_best]

Originally Posted by track_warrior

Hey guys i was reading vivids blog today and found out cusco is planning a 2mm larger throttle body for the toyobarus. What do you guys think? This thing might be tits if the tuner can maximize its potential with the ecu!!

http://www.vividracing.com/blog/anno...edium=facebook

Please go to maxbore. Stock throttle body is ~64.5-65mm. Maxbore is 68mm when finished. I have a Maxbore throttle body and zero issues it is direct plug and play but AFR's may be out of wack after. Only issue is the throttle hang when you depress the clutch pedal. Although I've gotten used to it.

[Dr. BRZ]

wouldn't a throttle body spacer be considered the same because it extends the length?

[Simply_the_best]

Originally Posted by Dr. BRZ

wouldn't a throttle body spacer be considered the same because it extends the length?

No thats just slightly increasing the volume of the intake manifold.

[86fab]

Originally Posted by Summerwolf

Are you looking for a guinea pig or have you done this on your own car already?

We have done it with Camaro throttle bodies in the past and seen positive results but I have yet to have the opportunity to do this to my BRZ. I wouldn't mind having a couple guinea pigs to throw together some different combinations of straight bores and tapers as well as spacers and adapters to different throttle bodies.