GReddy air intake question

[Foobar]

Originally Posted by GT86drifter

any dyno graphs related to this intake? im on the fence between the greddy and injen...

Same intake as the AFe/Takeda, so any of those dynos should apply to the GReddy.

[GT86drifter]

Originally Posted by Foobar

Same intake as the AFe/Takeda, so any of those dynos should apply to the GReddy.

as from the Greddy website they claiming

HP: upto 14*hp increase, 2-3 peak
TRQ: upto 13*ft-lbs increase, 6-7 peak

but on the graph its just about 3-4HP and about 6-7TQ I love the design but the injen gives more bang for buck from the intake shootout thread

[TestaRD86]

Hi,

I want to reuse my the Greddy Intake with a turbo application and I am trying to identify what the actual size of the tube that goes into the air filter. I am purchasing a MAF housing for the in between and need to know if it would be better to get 3.5" / 89mm OD or 3.25" / 83mm OD. Measuring the tube end it seemed to be 86mm so would it better to go bigger or slightly smaller. I don't want to risk it not fitting which would be a waste of a purchase. Thoughts / Advice?