Carbonsport Edanvale TRD Kits and TRD Rear Trunk Spoiler

[Ryan86]

Originally Posted by FT_86_SM_GP

Went to CarbonSport this weekend,

Tried the following two Trunk spoilers on,

1. BRZ trunk Spoiler - R2k
Attachment 110500
Attachment 110501

2. Duck Fin Spoiler - R2k
Attachment 110502
Attachment 110503

Did not like the fit on the car, does not sit flush, and it will have a gap after fitting,
Jimmy says you can close the gap with Silicone, lol
Not willing to do that...


3. Toyota TRD Spoiler from Toyota Dealership: R2.9k
Toyota had a special on TRD parts in the month of April 2015 which ended in the first week of May 2015. Their TRD Trunk spoiler sold for R1617.

Due to their poor marketing on parts, I did not know about it, If I did - would have bought one without even thinking,

Managed to source a TRD Rear Trunk Spoiler today from Toyota Pretoria North, After allot of negotiation, got the price down to R2500 before VAT and ended up paying around R2900 after VAT.

If you really have time to look, you can find TRD Spoilers from Toyota dealerships for approx R3200,

They advertise it for R4800 on the Toyota website - Not sure if people actually buy it at that price.

Comes with a Toyota Parts warranty and primered - Ready to paint.

Just need to find a decent place to spray + fit it and get an exact color match.
Attachment 110504

welcome home.

[sav]

Middle one - Dark Wing Duck. The terror that faps in the night!

[FT_86_SM_GP]

Thanks Ryan,

@sav would have went for the 'Dark Wing Duck' if it fitted decently.(with no Gaps) - Actually looks nice (Agressive) when paired with an aggressive wheel set up.




Ended up purchasing the TRD Spoiler from Toyota.

[sav]

Cool stuff. Taking it to Barry for painting and fitment?

[sav]

Cool stuff. Taking it to Barry for painting and fitment? What wheels are you getting?

[FT_86_SM_GP]

Originally Posted by sav

Cool stuff. Taking it to Barry for painting and fitment? What wheels are you getting?

Yep, Went to Barry this past weekend, got the following quote:

1. Spray Trunk Spoiler: R1250
2. Fitment Trunk Spoiler: R450

Also ideally wanted to respray front bumper and VPS

3. Spray Front Bumper: R1850
4. Fitment Front Spoiler/Labor: R500

Just need to source a more reasonable VPS quote, got an approx R7500 quote from VPS edenvale for VPS on Front Bumper and Half Bonnet + Half Fendors ...Didn't know VPS is soo expensive

In terms of wheels:

Have not committed to any spesific wheel,
(Need to invest in coilovers if I go 18inch)

The XXR wheels are in stock in SA, retailing for:
KZN: R7.5k(Hannaford Mag and Tyres)
JHB: R8k (Link below + The Wheel Shop)

Pitty its only available in Black

http://www.gumtree.co.za/a-tyres-rim...80910001636009

[FT_86_SM_GP]

..

[Dammod]

Originally Posted by FT_86_SM_GP

Yep, Went to Barry this past weekend, got the following quote:

1. Spray Trunk Spoiler: R1250
2. Fitment Trunk Spoiler: R450

Also ideally wanted to respray front bumper and VPS

3. Spray Front Bumper: R1850
4. Fitment Front Spoiler/Labor: R500

Just need to source a more reasonable VPS quote, got an approx R7500 quote from VPS edenvale for VPS on Front Bumper and Half Bonnet + Half Fendors ...Didn't know VPS is soo expensive

In terms of wheels:

Have not committed to any spesific wheel,
(Need to invest in coilovers if I go 18inch)

The XXR wheels are in stock in SA, retailing for:
KZN: R7.5k(Hannaford Mag and Tyres)
JHB: R8k (Link below + The Wheel Shop)

Pitty its only available in Black

http://www.gumtree.co.za/a-tyres-rim...80910001636009

Looks great man!

With regards to paint protection, I got Xpel done by SupaWrap. I got the whole bonnet, side mirrors, bumper and lights done for around 8k I think - will need to confirm.

Had to take it back once for bubbles in one or two spots but they sorted it out no problem. The guy did the entire job by hand - no pre-cut templates were available for me car at the time and he did a VERY impressive job. You can hardly see it unless you are looking for it.

After numerous trackdays the front of my car is still 99% chip free - only one or two managed to pierce the protection.

[Ryan86]

Pity you not in the circle, I sent up a few spoilers for R1900 to JHB yesterday.

[Fish Eagle]

There are even cheaper options.
This is what I've got on my car - great fit and finish, and I'm 100% happy with it

http://www.jonmotoring.com/brz-frs-t...trunk-spoiler/

[sav]

Originally Posted by FT_86_SM_GP

Yep, Went to Barry this past weekend, got the following quote:

1. Spray Trunk Spoiler: R1250
2. Fitment Trunk Spoiler: R450

Also ideally wanted to respray front bumper and VPS

3. Spray Front Bumper: R1850
4. Fitment Front Spoiler/Labor: R500

Just need to source a more reasonable VPS quote, got an approx R7500 quote from VPS edenvale for VPS on Front Bumper and Half Bonnet + Half Fendors ...Didn't know VPS is soo expensive

In terms of wheels:

Have not committed to any spesific wheel,
(Need to invest in coilovers if I go 18inch)

The XXR wheels are in stock in SA, retailing for:
KZN: R7.5k(Hannaford Mag and Tyres)
JHB: R8k (Link below + The Wheel Shop)

Pitty its only available in Black

http://www.gumtree.co.za/a-tyres-rim...80910001636009

I've seen VPS fitted by various different shops - Edenvale does the best work by far, it's not only about the film they're using but also the technique. Pretty much all of them do custom cutting, etc.

Also, it may not be the cheapest but do the full bonnet and fenders else it looks crap.

[BRY100]

Originally Posted by Ryan86

Pity you not in the circle, I sent up a few spoilers for R1900 to JHB yesterday.

Hi Ryan,


What spoilers did you send up to JHB ? Do you have any pics.


Thanks

[Ryan86]

Originally Posted by BRY100

Hi Ryan,


What spoilers did you send up to JHB ? Do you have any pics.


Thanks

OEM TRD spoilers, same as Shiren posted.

[Cheddaa]

Originally Posted by Ryan86

Pity you not in the circle, I sent up a few spoilers for R1900 to JHB yesterday.

And how wouldone get in this circle?