Vortech supercharger

[Celica00]

Supercharge or turbo, both will make this car rock. honestly i'm split completely down the middle about AVO or Perrin. this was posted a while back in perrins thread but just to remind everyone:

cant we all get along?

back on topic: super stoked to hear your experience w/ your new kit! this is an exciting time for our cars as people are actually starting to get their hands on FI

[2forme]

Originally Posted by SpeedmasterBRZ

stop posting inaccurate information

^^^DITTO

I cleared my bs so Skater1989 can have his post back will you?

Surely, cleaned.

[2forme]

Originally Posted by Celica00

Supercharge or turbo, both will make this car rock. honestly i'm split completely down the middle about AVO or Perrin. this was posted a while back in perrins thread but just to remind everyone:

cant we all get along?

back on topic: super stoked to hear your experience w/ your new kit! this is an exciting time for our cars as people are actually starting to get their hands on FI

Can't wait to start seeing third party dynos!

[skatery1989]

So got everything put back on and all I can say is WOW!!! This is what this car is missing the high end TQ you can really feel. When running from 4000-6000 rpm it pulls like crazy. Didn’t really drive it to hard waiting for Jeff with Perin to log at the log. Once I get a couple of the parts that I am missing ill be taking it to the dyno. I think with a E-85 tune it will be all this car needs. Didn’t get a chance for a viedo will get to that fomorrow. Have to rewire the mass air flow sensor. Have alot of pictures of install need to figure out a good way to upload them some where any suggestions.

[Noob4Life]

Flickr or photobucket would be your best options. Cant wait for a video! If you dont mind me asking will rewiring the maf be a requirement for this kit?

Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

[skatery1989]

Originally Posted by Noob4Life

Flickr or photobucket would be your best options. Cant wait for a video! If you dont mind me asking will rewiring the maf be a requirement for this kit?

Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

i was going to look in to photobucket. Ya the MAF sensor moves down onto the intercooler piping. Need about a foot and a half of wire vortech sent me wire from the first kit they designed but they moved it far there down so shorted me. Its fairly east to wire back up.

[Noob4Life]

Originally Posted by skatery1989

i was going to look in to photobucket. Ya the MAF sensor moves down onto the intercooler piping. Need about a foot and a half of wire vortech sent me wire from the first kit they designed but they moved it far there down so shorted me. Its fairly east to wire back up.

Haha I bet it is, ill be coming from a european, so I'm always very skeptical when it comes to wiring.

Photobucket would be better than flickr for regular pics because theres not as low of a cap. I have a flickr for photographs that I want to show off in the highest quality possible.

Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

[skatery1989]

O ya hate European cars. Will post more tomorrow about the install and driving experience. But for now I can say its worth the money if you have it.

[Acree]

Where did all the trolls come from?

-Acree

[Fonzi]

Congrats Man! This is great news to finally see a kit go on a car! Definitly some dyno numbers would be sweet!

[SpeedmasterBRZ]

More pics plus dyno.

[2forme]

Originally Posted by skatery1989

So got everything put back on and all I can say is WOW!!! This is what this car is missing the high end TQ you can really feel. When running from 4000-6000 rpm it pulls like crazy. Didn’t really drive it to hard waiting for Jeff with Perin to log at the log. Once I get a couple of the parts that I am missing ill be taking it to the dyno. I think with a E-85 tune it will be all this car needs. Didn’t get a chance for a viedo will get to that fomorrow. Have to rewire the mass air flow sensor. Have alot of pictures of install need to figure out a good way to upload them some where any suggestions.

Hurry up and get those dyno's up so we can compare

[skatery1989]

Originally Posted by 2forme

Hurry up and get those dyno's up so we can compare

Going to be awhile. Next year somwtime without those parts they said not to throw it on the dyno yet but as soon as there on ill get it. I think Jeff has been doing some runs maybe he'll throw you some numbers.

[uspspro]

Originally Posted by Celica00

S

cant we all get along?

This is an action shot... the Lion eventually crushes the trachea of that zebra, and feeds it to it's family. Thus, superchargers are clearly better. :happy0180: