For those with drilled sideskirts....

[dnieves]

Originally Posted by ChiTownFrs

I too run drilled side skirts. I went a overboard with protection with the holes I made to prevent rusting. Started with a base coat of POR-15 on each hole. Then after applied anti rust primer, and finished it up with touch up paint. When putting in the screws I covered the screw with a water proof sealant. Then used the same sealant along the rocker panel, and side skirt to prevent liquid from the outside seeping in. So far the skirts have been holding up great overall.

There's no such as thing going overboard with rust protection!