Oil coolers that will fit with the TRD intake? - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

FT-86 SpeedFactory · 01-01-2014, 10:19 PM

Quote:

Originally Posted by wootwoot

Is there any down side to those banjo bolts? Do they flow as well as the other fittings?

We haven't had any issues on the car we do nothing but abuse with a supercharger. :-)

Ryan86 · 01-02-2014, 12:15 AM

Quote:

Originally Posted by FT-86 SpeedFactory

We haven't had any issues on the car we do nothing but abuse with a supercharger. :-)

Hi, Happy New Year to all @FT-86 SpeedFactory
Would the oil cooler radiator fit with having the sC IC radiator?

FT-86 SpeedFactory · 01-02-2014, 12:53 AM

Quote:

Originally Posted by Ryan86

Hi, Happy New Year to all @FT-86 SpeedFactory
Would the oil cooler radiator fit with having the sC IC radiator?

You're going to have to custom mount it like we did.

wootwoot · 01-02-2014, 01:25 AM

Anyone make a sandwich plate without a thermostat that I can make my own oil cooler kit with? Using the banjo bolts that is....

wootwoot · 01-02-2014, 01:38 AM

Would this work?

[ame="http://www.amazon.com/Mishimoto-MMOP-TPS-Sandwich-Plate-Adapter/dp/B004UVL6T4/ref=sr_1_1?s=automotive&ie=UTF8&qid=1388641068&sr= 1-1&keywords=mishimoto+sandwich+plate"]Mishimoto MMOP-TPS Oil Sandwich Plate Adapter with Three 1/8" NPT Port : Amazon.com : Automotive[/ame]

FT-86 SpeedFactory · 01-02-2014, 01:41 AM

Quote:

Originally Posted by wootwoot

Would this work?

Mishimoto MMOP-TPS Oil Sandwich Plate Adapter with Three 1/8" NPT Port : Amazon.com : Automotive

No, your missing a ton of other parts. Amazon doesn't know anything about your car.

wootwoot · 01-02-2014, 02:00 AM

Quote:

Originally Posted by FT-86 SpeedFactory

No, your missing a ton of other parts. Amazon doesn't know anything about your car.

Hahahaha... I know you need spacers and such. Found this one:

http://ishiimotors.com/greddy-oil-se...ount-type.html

Should be good to go.

DAN_BRZ · 01-20-2014, 12:16 PM

does the mishimoto T-Stated sandwich plate come with the spacer needed? if not where would you get one.

stugray · 01-20-2014, 12:31 PM

Quote:

Originally Posted by wootwoot

Anyone make a sandwich plate without a thermostat that I can make my own oil cooler kit with? Using the banjo bolts that is....

Why would you NOT want a thermostat?
Just curious.

I have personally witnessed an oil cooler blowing out due to cold oil.
As I understand it the thermostat will save the cooler from this.

Also a proper thermostat setpoint (>212F) will allow the water to boil off.

Kris86 · 09-22-2016, 03:32 PM

Quote:

Originally Posted by FT-86 SpeedFactory

Mishimoto unit will fit just fine.

hearing about these banjo joints and reducing oil flow

is there a chance that this can cause oil starvation in a high hp turbo application?

go_a_way1 · 09-22-2016, 04:23 PM

Quote:

Originally Posted by Kris86

hearing about these banjo joints and reducing oil flow

is there a chance that this can cause oil starvation in a high hp turbo application?

I am going to find out soon haha!

FT-86 SpeedFactory · 09-24-2016, 08:42 AM

Quote:

Originally Posted by Kris86

hearing about these banjo joints and reducing oil flow

is there a chance that this can cause oil starvation in a high hp turbo application?

No we use it on our race car. 400WHP with 20 min sessions.

MisterSheep · 10-25-2016, 08:41 PM

Anyone know of this intake fits with a perrin oil cooler?

Bergycheese348 · 03-01-2022, 02:21 AM

Super old thread, I know.

There was a guy from the US that bought a TRD oil cooler (from one of the race spec cars, would have to buy used off yahoo or whatever), and from the looks of it it would easily clear the TRD intake box. Might as well make it TRD on TRD hehe

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
.: GReddy Air Intake System · Increases intake airflow · 4 Layer filter :.	Speed Element	Engine, Exhaust, Bolt-Ons	14	05-20-2013 07:06 PM
New Twist On Oil Coolers @ Pure Automotive Performance	Pure Automotive	Engine, Exhaust, Transmission	39	04-09-2013 11:33 PM
HKS Oil Coolers in stock	Sam Strano	Engine, Exhaust, Bolt-Ons	3	11-13-2012 02:41 PM

01-02-2014, 01:25 AM	#18
wootwoot Senior Member Join Date: Jul 2012 Drives: FRS Location: Cali Posts: 1,558 Thanks: 188 Thanked 462 Times in 264 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Anyone make a sandwich plate without a thermostat that I can make my own oil cooler kit with? Using the banjo bolts that is....

01-02-2014, 01:38 AM	#19
wootwoot Senior Member Join Date: Jul 2012 Drives: FRS Location: Cali Posts: 1,558 Thanks: 188 Thanked 462 Times in 264 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Would this work? [ame="http://www.amazon.com/Mishimoto-MMOP-TPS-Sandwich-Plate-Adapter/dp/B004UVL6T4/ref=sr_1_1?s=automotive&ie=UTF8&qid=1388641068&sr= 1-1&keywords=mishimoto+sandwich+plate"]Mishimoto MMOP-TPS Oil Sandwich Plate Adapter with Three 1/8" NPT Port : Amazon.com : Automotive[/ame]

01-20-2014, 12:16 PM	#22
DAN_BRZ Senior Member Join Date: Apr 2013 Drives: 2013 WRB BRZ Sport Tech Location: Mississauga Posts: 413 Thanks: 311 Thanked 122 Times in 73 Posts Mentioned: 7 Post(s) Tagged: 2 Thread(s)	does the mishimoto T-Stated sandwich plate come with the spacer needed? if not where would you get one.

03-01-2022, 02:21 AM	#28
Bergycheese348 Senior Member Join Date: Apr 2020 Drives: TRD Supercharged 2016 FR-S Location: Minnesota/Michigan Posts: 133 Thanks: 22 Thanked 69 Times in 36 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Super old thread, I know. There was a guy from the US that bought a TRD oil cooler (from one of the race spec cars, would have to buy used off yahoo or whatever), and from the looks of it it would easily clear the TRD intake box. Might as well make it TRD on TRD hehe

User Name		Remember Me?
Password