Let's see your LAUNCHES!!!!! - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Dadhawk · 04-25-2016, 08:37 PM

Still working on the mods, but as soon as its done will post up the launch....current progress...

renfield90 · 04-25-2016, 08:59 PM

Quote:

Originally Posted by PandaSPUR

Jesus, I'm assuming all that is wind noise and not something rattling to death right?

Nice video otherwise though haha.

Yup, wind noise. Video setup was "slap on gopro and hopefully orient the correct way."

Fender0122 · 04-28-2016, 03:51 PM

~150 runs on my car so far and still on stock axles. Not even clicking yet. Pretty much all runs were on Pro-kits (1" drop), so we'll see if going to Sportlines is any harsher on them.

FRS Justin · 05-02-2016, 07:34 AM

Here is a 7900 RPM launch on 10 inch slicks
[ame="https://www.youtube.com/watch?v=bTSx9UregOs"]13 52 frs - YouTube[/ame]

renfield90 · 05-02-2016, 11:41 AM

Quote:

Originally Posted by FRS Justin

Here is a 7900 RPM launch on 10 inch slicks

I'm assuming head work was done to accommodate 7900?

Also, guessing the burnout involved some combination of left foot on brake/clutch, then slip it off the brake? I need to practice that...

FRS Justin · 05-02-2016, 01:11 PM

Quote:

Originally Posted by renfield90

I'm assuming head work was done to accommodate 7900?

Also, guessing the burnout involved some combination of left foot on brake/clutch, then slip it off the brake? I need to practice that...

Bone stock motor never touched only a intake and tune with a complete exhaust on E85. It takes a little practice lol

rx3 · 05-02-2016, 01:59 PM

Here's also a launch on slicks and a stock motor from last week-end (without tire warming):
[ame="https://www.youtube.com/watch?v=Rjd9T4X4Kes"]Launch on slicks - YouTube[/ame]

renfield90 · 05-02-2016, 02:59 PM

Quote:

Originally Posted by FRS Justin

Bone stock motor never touched only a intake and tune with a complete exhaust on E85. It takes a little practice lol

Did not know 7900 was safe on stock internals, good to know.

stevesnj · 05-02-2016, 03:18 PM

13.5? NIce run. Turbo's and Superchargers are not needed if you tune your car properly and learn how to drive. Go simple with these cars and you may net surprising gains.

FRS Justin · 05-02-2016, 04:35 PM

Quote:

Originally Posted by stevesnj

13.5? NIce run. Turbo's and Superchargers are not needed if you tune your car properly and learn how to drive. Go simple with these cars and you may net surprising gains.

Here is a 13.47 run

[ame="https://www.youtube.com/watch?v=WzLqo6-VYR8"]13 47 frs - YouTube[/ame]

FRS Justin · 05-02-2016, 04:41 PM

Quote:

Originally Posted by renfield90

Did not know 7900 was safe on stock internals, good to know.

I put 34000 on my N/A motor a hard 34k but I did my maintenance religiously using the best products. I never had a issue the only thing on the engine I had to replace was coil pack 1 because the header cooked it.

Thorpedo · 05-03-2016, 06:46 AM

Quote:

Originally Posted by renfield90

Did not know 7900 was safe on stock internals, good to know.

Again, this is not how it works....

It's not like you drop your car X amount and the axle will immediately explode, nor will there be a "safe" rpm that every car on the board will run at and last forever. Just because he is running to 7900 doesn't mean your rocker arms will hold together for even 1 run at that RPM.

Saying 7900 is "safe" is like saying holding your car on rev limiter for 5 minutes is safe because your buddy did it.

More abuse = higher likelihood of failure.

I'd be very interested in seeing his dyno graph, power usually falls off pretty good up in that rev range.

Great runs though FRS Justin. You've got some of the best times i've seen for your mod list.

ZionsWrath · 05-03-2016, 07:07 AM

Yea nice runs.

Next mod you need it camera man mod though.

renfield90 · 05-03-2016, 11:17 AM

Quote:

Originally Posted by Thorpedo

Again, this is not how it works....

It's not like you drop your car X amount and the axle will immediately explode, nor will there be a "safe" rpm that every car on the board will run at and last forever. Just because he is running to 7900 doesn't mean your rocker arms will hold together for even 1 run at that RPM.

Saying 7900 is "safe" is like saying holding your car on rev limiter for 5 minutes is safe because your buddy did it.

More abuse = higher likelihood of failure.

I'd be very interested in seeing his dyno graph, power usually falls off pretty good up in that rev range.

Great runs though FRS Justin. You've got some of the best times i've seen for your mod list.

Don't patronize me. I know exactly what "safe" means to me.

Maybe next time you should ask for clarifications instead of making ASSumptions and distilling volumes of intent from a one sentence post.

Cheers.

04-25-2016, 08:37 PM	#15
Dadhawk Senior Member Join Date: Feb 2012 Drives: '13 FR-S (#3 of 1st 86) Location: Powder Springs, GA Posts: 20,119 Thanks: 39,700 Thanked 25,478 Times in 11,613 Posts Mentioned: 187 Post(s)	Still working on the mods, but as soon as its done will post up the launch....current progress... __________________ Olivia 05/03/2012 - 01/06/2024. 231,146 glorious miles. Visit my Owner's Journal where I wax philosophic on all things FR-S Post your 86 or see others in front of a(n) (in)famous landmark. What fits in your 86? Show us the "Junk In Your Trunk".

04-28-2016, 03:51 PM	#17
Fender0122 Member Join Date: Oct 2013 Drives: 2013 BRZ Limited SWP 6MT Location: Columbus, Ohio Posts: 86 Thanks: 22 Thanked 71 Times in 23 Posts Mentioned: 1 Post(s)	~150 runs on my car so far and still on stock axles. Not even clicking yet. Pretty much all runs were on Pro-kits (1" drop), so we'll see if going to Sportlines is any harsher on them. __________________ 2013 BRZ Limited SWP 6MT OVR-SCCA Course Design and SSSI

05-02-2016, 07:34 AM	#18
FRS Justin Senior Member Join Date: May 2014 Drives: 2013 Asphalt FRS Location: San Antonio Posts: 994 Thanks: 693 Thanked 695 Times in 417 Posts Mentioned: 22 Post(s)	Here is a 7900 RPM launch on 10 inch slicks [ame="https://www.youtube.com/watch?v=bTSx9UregOs"]13 52 frs - YouTube[/ame] __________________ Instagram FT86PROJECT9S Facebook FT86PROJECT9S 710whp

05-02-2016, 03:18 PM	#23
stevesnj Senior Member Join Date: May 2013 Drives: 2016 FR-S Oceanic Blue Location: Southern NJ Posts: 2,958 Thanks: 2,158 Thanked 1,601 Times in 923 Posts Mentioned: 30 Post(s)	13.5? NIce run. Turbo's and Superchargers are not needed if you tune your car properly and learn how to drive. Go simple with these cars and you may net surprising gains. __________________ My 2016 Build thread TRD Exhaust with custom quad tips, TRD Lowering Springs,TRD Quick shifter,LED;DRL, Projectors, and turn signals. Re-badge, 86 Nanny, WinmaxW2 Pads, K&N Drop In, Antenna delete

05-03-2016, 07:07 AM	#27
ZionsWrath Thanks Join Date: Apr 2013 Drives: BRZ Location: NY Posts: 4,163 Thanks: 5,989 Thanked 3,100 Times in 1,498 Posts Mentioned: 38 Post(s)	Yea nice runs. Next mod you need it camera man mod though. __________________

05-02-2016, 01:59 PM	#21
rx3 Senior Member Join Date: Mar 2013 Drives: BRZ Location: Europe Posts: 350 Thanks: 53 Thanked 114 Times in 71 Posts Mentioned: 1 Post(s)	Here's also a launch on slicks and a stock motor from last week-end (without tire warming): [ame="https://www.youtube.com/watch?v=Rjd9T4X4Kes"]Launch on slicks - YouTube[/ame]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Toyota Finance 86 Series Race Spec Car Launches in New Zealand	Hachiroku	Scion FR-S / Toyota 86 GT86 General Forum	48	04-15-2016 12:23 PM
Nissan Skyline GTR R34 - Anti-Lag, LAUNCHES!	JPxM0Dz	Other Vehicles & General Automotive Discussions	3	03-19-2014 02:35 PM
Litchfield Supercharged BRZ Spec S with 280hp - Launches and Accelerations	JPxM0Dz	BRZ Photos, Videos, Wallpapers, Gallery Forum	1	01-22-2014 10:15 AM
Audi launches A3 Sedan commercials about Car Abstinence	Raiden	Other Vehicles & General Automotive Discussions	15	12-31-2013 09:18 PM

User Name		Remember Me?
Password