ALL ARIZONA FR-S/BRZ OWNERS HOME PAGE

[captain_jack]

Received and info sent.

[Yruyur]

Ordered hi temp vinyl trd decals for the calipers and led reverse led's. Had to use some eBay bucks before they expired.

Sent from my flux capacitor using Taptalk

[RedLeader]

Hey Yruyru, when you did your Eibach spring install, did you notice a low pitch thump from the rear end when you go over a bump? Part of me thinks its the trunk cover, but I don't know if it;s something worse, and more expensive.

[Yruyur]

I get the same thump since in a while. Network alignment did mine.

Sent from my flux capacitor using Taptalk

[RedLeader]

Well, after the first dealership told me they don't have the alignment specs in their computer, I'm now sitting across town at the other dealership getting the alignment done. I'm getting tired of dealing with the Toyota dealership right next to my apartment, they seem to be incurably incompetent.

[WithNolock]

Originally Posted by Yruyur

Will be doing this soon. Will most likely plastidip it too. Better than paying 800 like the guy who bought the gt86 airbag.

http://www.ft86club.com/forums/showthread.php?t=20938

I really want to do this too but I have a bad habit of royally screwing up these types of projects. After the airbag I'll just need to work on the floormats. Too bad those Toyota 86 Racing ones won't work for LHD.

[gmookher]

Front:

Camber: 0 +/- 45' (0 +/- 0.75°) (Right/Left Difference: 0°45' (0.75°) or less)
Caster (Reference): 5°54' (5.90°)
Steering Axis Inclination (Reference): 15°31' (15.52°)
Toe (Each Wheel): 0°00' +/- 0°11' (0.00° +/- 0.19°)
Toe (Total): 0 +/- 3.0 mm (0 +/- 0.1181 in.)

Rear:

Camber: -1°12' +/- 45' (-1.20° +/- 0.75°) (Right/Left Difference: 45' (0.75°) or less)
Toe (Each Wheel): C + D: 0°10' +/- 0°15' (0.16° +/- 0.24°)
Toe (Total): 2.0 +/- 3.0 mm(0.0787 +/- 0.1181 in.)

[RedLeader]

Originally Posted by gmookher

Front:

Camber: 0 +/- 45' (0 +/- 0.75°) (Right/Left Difference: 0°45' (0.75°) or less)
Caster (Reference): 5°54' (5.90°)
Steering Axis Inclination (Reference): 15°31' (15.52°)
Toe (Each Wheel): 0°00' +/- 0°11' (0.00° +/- 0.19°)
Toe (Total): 0 +/- 3.0 mm (0 +/- 0.1181 in.)

Rear:

Camber: -1°12' +/- 45' (-1.20° +/- 0.75°) (Right/Left Difference: 45' (0.75°) or less)
Toe (Each Wheel): C + D: 0°10' +/- 0°15' (0.16° +/- 0.24°)
Toe (Total): 2.0 +/- 3.0 mm(0.0787 +/- 0.1181 in.)

I have the specs (FRS factory service manual FTW), they just, for whatever reason, said they'd have to call in their alignment guy to either download the specs from the Toyota info something, or custom build the car's profile so they can align it. Either way they wanted me to come back in a couple of days. I called the dealership across town, asked if they have the specs and can align the car today, now BAM, here I sit waiting here while the car goes on the alignment rack.

[RedLeader]

Status update. Turns out the rear shocks are blown, so it looks like I'll be replacing those. So much for doing suspension work myself.

[chrisbfrs]

Finished my calipers in red with G2 kit last night.

[Accurate Race Shop]

Originally Posted by RedLeader

Status update. Turns out the rear shocks are blown, so it looks like I'll be replacing those. So much for doing suspension work myself.

Was it caused by the springs you installed?

Sent from my SGH-T989 using Tapatalk 2

[RedLeader]

Originally Posted by jasper

Was it caused by the springs you installed?

Sent from my SGH-T989 using Tapatalk 2

They are trying to figure that out. They don't believe so, since it shouldnt have happened that fast. They asked how they were assembled and since they assembled the rears for me, I don't know exactly.


Sent from...somewhere?

[SMOKETREES]

Which ones should i get out of the last 5 on the 2nd page? mainly looking at the regular stainless steel ones but the titanium ones are pretty cool make sure to change to just look at dcsport tips and go on 2nd page....

http://www.pepboys.com/performance/exhaust/tips/00738/

[Yruyur]

Pilot oval slant look nice.

Sent from my flux capacitor using Taptalk