Visconti Tuning - Latest BRZ Flash Info - Page 370 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Yruyur · 05-24-2013, 09:29 AM

Sounds like something went wrong.

Sent from my SCH-I535 using Tapatalk 2

Visconti · 05-24-2013, 09:33 AM

Quote:

Originally Posted by Yruyur

Sounds like something went wrong.

Sent from my SCH-I535 using Tapatalk 2

No, you'd be surprised how many people don't update the software that asks you if you want to check for updates everytime it's opened !

fenton · 05-24-2013, 10:28 AM

Quote:

Originally Posted by Visconti

No, you'd be surprised how many people don't update the software that asks you if you want to check for updates everytime it's opened !

Question for @Visconti or @Rich@ViscontiTuning.

Car came on with slip light and abs light today while sitting in traffic. Traction control or vsc sport mode is not engage-able. I do not have a check engine light but my idle does seems to be hunting a bit between 1000 and 600 (no violent or anything)

If I take this to the dealer do I need to remove the flash?

Only thing I did different yesterday was install new hids and led turn signals with cf18 flash relay.

Thanks for your help guys!

Sent from my HTC One using Tapatalk 2

CBR600RR · 05-24-2013, 10:33 AM

^ you may want to try submitting your question to them in the support system.

My suggestion would be to flash back to stock and take it in.

xjohnx · 05-24-2013, 10:36 AM

Quote:

Originally Posted by fenton

Question for @Visconti or @Rich@ViscontiTuning.

Car came on with slip light and abs light today while sitting in traffic. Traction control or vsc sport mode is not engage-able. I do not have a check engine light but my idle does seems to be hunting a bit between 1000 and 600 (no violent or anything)

If I take this to the dealer do I need to remove the flash?

Only thing I did different yesterday was install new hids and led turn signals with cf18 flash relay.

Thanks for your help guys!

Sent from my HTC One using Tapatalk 2

Check this thread: http://www.ft86club.com/forums/showthread.php?t=26737

fenton · 05-24-2013, 10:37 AM

And now i just turned my car back on its and gone.......?

fenton · 05-24-2013, 10:41 AM

Quote:

Originally Posted by xjohnx

Check this thread: http://www.ft86club.com/forums/showthread.php?t=26737

awesome info thank you very much.

Looks like a abs or speed sensor issue and not the engine failure one haha

xjohnx · 05-24-2013, 10:43 AM

Quote:

Originally Posted by fenton

awesome info thank you very much.

Looks like a abs or speed sensor issue and not the engine failure one haha

It happened to me one time after driving angrily, but after turning it off and back on it hasn't returned in over 3000 miles. I'd let it go unless it comes back.

Visconti · 05-24-2013, 03:24 PM

Looks like EcuTek does not have the latest dealer flash that has the injector seal fix built into it.

I am updating the A00D Tune files to incorporate Subaru's Injector Seal Fix.

Automatic Notes have been updated - Please note release date has not been announced yet

-John

Carwhisperer · 05-24-2013, 06:47 PM

Thanks for staying on top of this John.

KamalT · 05-25-2013, 12:14 PM

ecutek 1.0.0.12503 update out

Deepseadiver · 05-25-2013, 06:45 PM

Quote:

Originally Posted by Calum

I read something in another thread that leads me to believe that the ECU learning the voltages of YOUR throttle pedal. These things can vary a little. The guy (I'd post credit if I remembered who it was) posted that Perrin told him to turn the ignition to on (engine off) and push the throttle to the floor about 20 times. Switch the ignition off, back on, and push the throttle to the floor another 20 times. After that you should be good to go.

I have no idea if that's real at all, but it's a viable theory for me, given how little I know about what's going on in the ECU.

was there any truth about this?

also my launch control is not working. I searched and found a few tips like make sure you are in the right map, stop the car and put in neutral, release clutch, press clutch put in first and floor gas pedal.
I give it another try beacause I mignt not have been in neutral with the clutch out before I tried it.

Kodename47 · 05-26-2013, 06:21 AM

Quote:

Originally Posted by Deepseadiver

was there any truth about this?

I got told it was 5 times and it seems to work

My method: Warm car. Reflash and do the required reset. Once that completes, you're already in acc. mode. Press the pedal gradually all the way down and up 5 times. Start car, leave to idle for 1 minute (you hear the cams settle after 30/40 seconds) and you're good to go.

Visconti · 05-28-2013, 11:23 AM

New EcuTek update today.

Support for the A01D Rom File.

05-24-2013, 09:29 AM	#5167
Yruyur Senior Member Join Date: Jun 2012 Drives: Scion fr-s asphalt M/T Location: Phoenix, AZ Posts: 4,192 Thanks: 1,416 Thanked 1,631 Times in 941 Posts Mentioned: 96 Post(s)	Sounds like something went wrong. Sent from my SCH-I535 using Tapatalk 2 __________________

05-24-2013, 03:24 PM	#5175
Visconti Banned Join Date: Apr 2012 Drives: 05 STi Location: Norwalk, CT Posts: 2,843 Thanks: 196 Thanked 3,188 Times in 1,197 Posts Mentioned: 375 Post(s)	Looks like EcuTek does not have the latest dealer flash that has the injector seal fix built into it. I am updating the A00D Tune files to incorporate Subaru's Injector Seal Fix. Automatic Notes have been updated - Please note release date has not been announced yet -John Last edited by Visconti; 05-24-2013 at 03:38 PM.

05-25-2013, 12:14 PM	#5177
KamalT Senior Member Join Date: Jul 2012 Drives: Pearl 86 GT Location: Gold Coast Posts: 227 Thanks: 82 Thanked 34 Times in 23 Posts Mentioned: 0 Post(s)	ecutek 1.0.0.12503 update out __________________ White GT \| Visconti_TUNED

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LED Front Signals with Resistor Flash Correctors	DarrenDriven	Cosmetic Modification (Interior/Exterior/Lighting)	38	09-20-2012 02:05 PM
Brz Info/Specs (helpful info for questions asked often)	Gaen	BRZ First-Gen (2012+) — General Topics	0	05-24-2012 10:09 PM
How to embed a flash gallery?	DarrenDriven	Site Announcements / Questions / Issues	2	04-24-2012 07:43 PM
Production Spec Subaru BRZ Previewed at National Conference & Latest Info/Rumors	blur	BRZ First-Gen (2012+) — General Topics	130	09-01-2011 01:42 PM

05-24-2013, 10:33 AM	#5170
CBR600RR Senior Member Join Date: Jul 2012 Drives: Raven Black Location: Ottawa, Canada Posts: 1,343 Thanks: 451 Thanked 563 Times in 276 Posts Mentioned: 6 Post(s)	^ you may want to try submitting your question to them in the support system. My suggestion would be to flash back to stock and take it in.

05-24-2013, 10:37 AM	#5172
fenton Senior Member Join Date: May 2012 Drives: 2013 FR-S Location: Calgary Posts: 2,086 Thanks: 526 Thanked 1,614 Times in 726 Posts Mentioned: 120 Post(s)	And now i just turned my car back on its and gone.......?

05-24-2013, 06:47 PM	#5176
Carwhisperer Senior Member Join Date: Jan 2012 Drives: A lot of supercars. Location: USA Posts: 495 Thanks: 237 Thanked 148 Times in 90 Posts Mentioned: 5 Post(s)	Thanks for staying on top of this John.

05-28-2013, 11:23 AM	#5180
Visconti Banned Join Date: Apr 2012 Drives: 05 STi Location: Norwalk, CT Posts: 2,843 Thanks: 196 Thanked 3,188 Times in 1,197 Posts Mentioned: 375 Post(s)	New EcuTek update today. Support for the A01D Rom File.

User Name		Remember Me?
Password