P&L Header prototype

[Pandle]

Nameless.

[P&L Motorsports]

Interesting -- I think you are our first with the Nameless. This one?

[Pandle]

Yep that's it.

[P&L Motorsports]

PMing to keep the thread from being too congested.

[xjohnx]

Originally Posted by P&L Motorsports

PMing to keep the thread from being too congested.

I've got the same one, would love to hear what you find out.

[P&L Motorsports]

I'm all about transparency so I'll be sure to keep the thread updated.

Dylan@P&L

[Xdragonxb0i]

Originally Posted by xjohnx

I've got the same one, would love to hear what you find out.

I am running the P&L Headers and Nameless overpipe/Front combo. Works fine with me. But i got my headers a week before the group buy (maybe different batch?)

[P&L Motorsports]

Nope. All are on the same jig. @Pandle - incoming.

[P&L Motorsports]

Originally Posted by Xdragonxb0i

I am running the P&L Headers and Nameless overpipe/Front combo. Works fine with me. But i got my headers a week before the group buy (maybe different batch?)

Maybe Nameless was different batch, or the shop is just in unfamiliar waters. Whatever the case we'll get it figured out.

[xjohnx]

Originally Posted by P&L Motorsports

Maybe Nameless was different batch, or the shop is just in unfamiliar waters. Whatever the case we'll get it figured out.

Can't imagine that's the case either, as the Nameless pipe still has to bolt up to the stock header.

My guess is it is simply be a case of loosening up the entire exhaust and connecting it to the header first, then working their way back to make sure it's properly aligned.

[Hawaiian]

Originally Posted by xjohnx

Can't imagine that's the case either, as the Nameless pipe still has to bolt up to the stock header.

My guess is it is simply be a case of loosening up the entire exhaust and connecting it to the header first, then working their way back to make sure it's properly aligned.

^this.

if it bolts to the stock header, it will bolt to the P@L header. There is just an installer error somewhere.

On a side note whenever I see the name Pandle I say it the same way in my head as I would P&L. Freaky.

[P&L Motorsports]

Update: Apparently the shop, seemingly without Pandle's consent, cut and re-welded the downpipe and added a flexpipe. Word is there is a ton of rattle. I'm not trying to call the shop out by name, but if you're in Pandle's area (Washington) please recommend a shop.

Dylan@P&L

[Deepseadiver]

Ouch!

[xjohnx]

Originally Posted by P&L Motorsports

I'm not trying to call the shop out by name, but if you're in Pandle's area (Washington) please recommend a shop.

Alternatively, if you're looking for a suggestion of a shop to avoid, I'm guessing @Pandle can give you some advice.