BRZ NAV/DVD bypass

[Rsktrance4mer]

Originally Posted by Sportsguy83

Follow the above post, but keep in mind this does not complete the bypass. This is only to not need the parking brake up. To complete the bypass,you need to add a switch in the VSS cable to turn it off for instruction input and then back on for normal driving in order for the GPS to work properly.

oh like i said i'm not worried about the gps..i dont mind if that blocks out..i just want my videos in divx to play and not be blocked out..so by cutting the grey and re-grounding the wire.. i'll still be able to play videos while driving?

[Sportsguy83]

Originally Posted by Rsktrance4mer

oh like i said i'm not worried about the gps..i dont mind if that blocks out..i just want my videos in divx to play and not be blocked out..so by cutting the grey and re-grounding the wire.. i'll still be able to play videos while driving?

No, the grey wire by itself in a plug is only for the e-brake. Follow the other posts for the VSS cable. (I'm sorry I can't help more as I never did it).

[Rsktrance4mer]

yeah... i just cut the grey..but the VSS still blocks out the video while driving..but at lease it comes back on at a stop lol..since that's really the only time u can watch the video lol.and the music still plays..so i think i'll be okay with it until someone can get around the VSS..i personally dont want to add a switch so i'll leave it as this..

[Rsktrance4mer]

i was using the video as Music Videos in the car so.i still got sound while i'm driving so i dont mind.

[christgt86]

One question - I tried this on my 2014 Toyota 86. I just re-grounded the grey wire and it works for both the DVD and Navi. However I still have the e-brake signal on my dashboard. Just wanted to find out if this is the same for all of you that tried this?