Sportsguy's LS2 Swapped BRZ

[kombatlion]

Originally Posted by Sportsguy83

No, no point in wasting money on the Dyno to then pay again to have it fine tuned on the Dyno. Waiting for Visconti to come down and Dyno tune it

When they are gone tune ur ride?

[Sportsguy83]

Originally Posted by kombatlion

When they are gone tune ur ride?

I'm e-tuning for now. Waiting for his busy schedule to open up. If I find a dyno day or something that is cheap (like $30 for a couple of pulls) I will Dyno it before John comes down.

[lbroskee]

Originally Posted by Sportsguy83

US, and had to open them a tiny bit more to fit the plastic inserts.

what sizes did you use instead?

[Sportsguy83]

Originally Posted by lbroskee

what sizes did you use instead?

13/64" for the 5mm and and 5/16" for the 8mm

[nix]

Originally Posted by Sportsguy83

Installed the OEM Armrest today.

Looks comfy!! Can't wait to get mine.

[Sportsguy83]

Originally Posted by nix

Looks comfy!! Can't wait to get mine.

It is very nice. Loving it.

Sent from my HTC One X using Tapatalk 2

[Sportsguy83]

Got some nice videos to share. Will be uploading soon

[SmsAlSuwaidi]

I suspect you haz moaaaar boost

[Sportsguy83]

Originally Posted by SmsAlSuwaidi

I suspect you haz moaaaar boost

Still sitting at somewhere around 9 psi, need a bigger actuator spring.

[SmsAlSuwaidi]

Originally Posted by Sportsguy83

Still sitting at somewhere around 9 psi, need a bigger actuator spring.

Willing to bump it up even more, + why isn't the current one holding up ?

[Sportsguy83]

Ok, so here are two inside the car videos: Shoutout to @jazztennor for awesome video taking skills

First, 1-3.5 gears pull

[ame="http://www.youtube.com/watch?v=9od727zgw3o"]Subaru BRZ wth Avo Turbo Kit 1-3.5 gears pull - YouTube[/ame]

Second, 2-3 gear pulls.

[ame="http://www.youtube.com/watch?v=lEoqIjoj0yM"]Subaru BRZ with AVO Kit Second and Third gear pull - YouTube[/ame]

[Sportsguy83]

Originally Posted by SmsAlSuwaidi

Willing to bump it up even more, + why isn't the current one holding up ?

It's a 5 psi actuator. As a rule of thumb, you only push the actuator to double its intended actuation psi. I won't bump it much more looking for around 12 psi max and that's it.

[SmsAlSuwaidi]

Originally Posted by Sportsguy83

It's a 5 psi actuator. As a rule of thumb, you only push the actuator to double its intended actuation psi. I won't bump it much more looking for around 12 psi max and that's it.

that's something new, but I thought you had the stage 2 kit which came with the bigger actuator

+ great videos

[Sportsguy83]

Originally Posted by SmsAlSuwaidi

that's something new, but I thought you had the stage 2 kit which came with the bigger actuator

+ great videos

Thanks on the videos!

I did get stage 2+, but had an issue with the rod of the bigger actuator and I'm waiting on one new actuator which should be on its way soon.