My BRZ ST* Autocross build - Page 49 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

UncleFester · 04-29-2013, 11:35 AM

What difference do you feel with the differential bushings?

Scooby South · 04-29-2013, 11:55 AM

Quote:

Originally Posted by UncleFester

What difference do you feel with the differential bushings?

Its hard to say as the whole package:
Motor mounts. Trans insert.. Front Bar/bushings, Steering Rack bushings, Control arm Bushings, Subframe Bushings, and Rear Diff Bushings makes the car feel more solid and connected all the way around.. I could tell my launches were better...no wheel hope and minimal spin. so I think it hooked up alot better and way more smooth.. Turn-in is instantaneous.. Car goes where its pointed...no questions.. Steering is almost to sensative..to a point that if your not used to it, will easily make you overdrive the car.. once your used to it.. it drives sooooo easy that I was ahead soooo far on course that I went Conefree all day yesterday except my last run.. which I don't recall hitting any cones..so I might have just nicked one somewhere.. but as a whole.. Car is SOLID and completely connected.. if that makes sense..

Bill

7thgear · 04-29-2013, 12:11 PM

Quote:

Originally Posted by Scooby South

Its hard to say as the whole package:
Motor mounts. Trans insert.. Front Bar/bushings, Steering Rack bushings, Control arm Bushings, Subframe Bushings, and Rear Diff Bushings makes the car feel more solid and connected all the way around.. I could tell my launches were better...no wheel hope and minimal spin. so I think it hooked up alot better and way more smooth.. Turn-in is instantaneous.. Car goes where its pointed...no questions.. Steering is almost to sensative..to a point that if your not used to it, will easily make you overdrive the car.. once your used to it.. it drives sooooo easy that I was ahead soooo far on course that I went Conefree all day yesterday except my last run.. which I don't recall hitting any cones..so I might have just nicked one somewhere.. but as a whole.. Car is SOLID and completely connected.. if that makes sense..

Bill

hi,

what product did you use for the engine mounts?

Scooby South · 04-29-2013, 12:18 PM

^^^ cusco engine mounts

Bill

7thgear · 04-29-2013, 12:39 PM

sweet, didn't know they were finally out.

you also mention that oyu have the transmission insert, would you switch to a similar cusco/beatrush "cage" design if it came out or if it's already out or do you feel the insert is more than enough to get the job done?

Scooby South · 04-29-2013, 12:41 PM

Quote:

Originally Posted by 7thgear

sweet, didn't know they were finally out.

you also mention that oyu have the transmission insert, would you switch to a similar cusco/beatrush "cage" design if it came out or if it's already out or do you feel the insert is more than enough to get the job done?

Kartboy Tranny insert is all thats needed.. like I say..everything has a very connected feeling..and no Slop..ANYWHERE..

Bill

Scooby South · 04-29-2013, 08:10 PM

One of my runs from yesterday..car took 1-2 in class and 7th and 10th out of 120 on index..

Giddyup

[ame]http://youtu.be/Nz4uoEOUdpo[/ame]

GTB/ZR-1 · 04-29-2013, 08:35 PM

Were you ever able to even out the rear camber w/o aftermarket LC arms?

Scooby South · 04-29-2013, 08:37 PM

yes...

no problem now.. -2.0 lowered the rear ..

Scooby South · 04-29-2013, 09:24 PM

And my INCAR of me doing Work..

enjoy

[ame]http://youtu.be/c6PyGKN8soU[/ame]

GTB/ZR-1 · 04-29-2013, 09:49 PM

A man on a mission!

Scooby South · 04-29-2013, 10:16 PM

Quote:

Originally Posted by GTB/ZR-1

A man on a mission!

hahaha you have no IDEA...

Kuzuri · 04-29-2013, 10:27 PM

What exhaust do you have on your car?

UncleFester · 04-29-2013, 10:28 PM

Quote:

Originally Posted by Scooby South

One of my runs from yesterday..car took 1-2 in class and 7th and 10th out of 120 on index..

Giddyup

Where are the turns? Lol

04-29-2013, 12:39 PM	#677
7thgear i'm sorry, what? Join Date: Jan 2012 Drives: Canada Location: I rock a beat harder than you can beat it with rocks Posts: 4,399 Thanks: 357 Thanked 2,508 Times in 1,268 Posts Mentioned: 40 Post(s)	sweet, didn't know they were finally out. you also mention that oyu have the transmission insert, would you switch to a similar cusco/beatrush "cage" design if it came out or if it's already out or do you feel the insert is more than enough to get the job done? __________________ don't you think if I was wrong, I'd know it?

04-29-2013, 10:27 PM	#685
Kuzuri __(X)__ Join Date: Feb 2012 Drives: '11 Legacy, '89 190E, '78 GS1000 Location: Wisconsin Posts: 958 Thanks: 300 Thanked 697 Times in 332 Posts Mentioned: 24 Post(s)	What exhaust do you have on your car? __________________ IG: @dustin_faulkner

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Subaru/Scion warranty and autocross	Ribface	Tracking / Autocross / HPDE / Drifting	55	06-17-2015 08:30 PM
Will you Autocross your 86?	Ribface	Tracking / Autocross / HPDE / Drifting	131	06-22-2012 05:48 PM
Which autocross class?	jpdarty7	Tracking / Autocross / HPDE / Drifting	66	06-21-2012 05:53 PM
FR-S at a CA Autocross	oneday	Scion FR-S / Toyota 86 GT86 General Forum	57	03-26-2012 03:38 PM

04-29-2013, 11:35 AM	#673
UncleFester Senior Member Join Date: Jun 2012 Drives: BRZ Location: Northern Virginia Posts: 597 Thanks: 157 Thanked 178 Times in 120 Posts Mentioned: 15 Post(s)	What difference do you feel with the differential bushings?

04-29-2013, 08:35 PM	#680
GTB/ZR-1 Senior Member Join Date: Oct 2012 Drives: '13 BRZ in WRB--let's mod!!! Location: Central, FL Posts: 1,224 Thanks: 317 Thanked 449 Times in 262 Posts Mentioned: 0 Post(s)	Were you ever able to even out the rear camber w/o aftermarket LC arms?

04-29-2013, 09:49 PM	#683
GTB/ZR-1 Senior Member Join Date: Oct 2012 Drives: '13 BRZ in WRB--let's mod!!! Location: Central, FL Posts: 1,224 Thanks: 317 Thanked 449 Times in 262 Posts Mentioned: 0 Post(s)	A man on a mission!

User Name		Remember Me?
Password