Fa20Club.com Turbo Kit FASTEST IN FLORIDA

[Sportsguy83]

Originally Posted by ft_sjo

Watch out, the lynch mob will be after you for suggesting that.

Yes yes, because gauges in the dash cluster is exactly the same as by the usb port right??

[King Tut]

Originally Posted by ft_sjo

Watch out, the lynch mob will be after you for suggesting that.

I have been critical of the Innovate gauge setup and the Full Blown gauge setup where you need a passenger to read the gauges as well. I will be critical of any gauge solution that doesn't place them at least at gauge cluster level, and I prefer them above the dash level.

[lexusb3]

In my opinion of course I don't look at my gauges every time I punch it which is from time to time .. The car is tuned with all the safety features boost cut, limits etc etc so the location won't bother me to much its still visible don't have to turn your head another direction lol

[Sportsguy83]

Originally Posted by lexusb3

In my opinion of course I don't look at my gauges every time I punch it which is from time to time .. The car is tuned with all the safety features boost cut, limits etc etc so the location won't bother me to much its still visible don't have to turn your head another direction lol

The only thing that matters is that you are happy and comfortable with it.

[lexusb3]

Originally Posted by Sportsguy83

The only thing that matters is that you are happy and comfortable with it.

Ya I love it lol

[Brody602]

Originally Posted by lexusb3

My first Model complete need to adjust more and it will b a perfect fit ... Sorry its orange plexi because I picked up the wrong color. I was in a rush lol but it will b black lol

Do any modifications have to be done to the tray that can't be hidden afterwards? Or just drill holes for the wires? (In the event I would remove the gauges) how much would you sell this gauge pod for?

[King Tut]

Originally Posted by lexusb3

In my opinion of course I don't look at my gauges every time I punch it which is from time to time .. The car is tuned with all the safety features boost cut, limits etc etc so the location won't bother me to much its still visible don't have to turn your head another direction lol

I at least glance at my failsafe the majority of times I accelerate. A quick glance down probably won't be an issue, but if you are trying to see your boost curve or make sure your AFR is good for an entire pull to 7400 RPM, then I wouldn't keep looking down, haha. Do your gauges datalog like the AEM Failsafe so you can review the data later? I am hoping to get my electronic boost controller screen mounted in that area.

[lexusb3]

Originally Posted by Brody602

Do any modifications have to be done to the tray that can't be hidden afterwards? Or just drill holes for the wires? (In the event I would remove the gauges) how much would you sell this gauge pod for?

I will post more pictures for u of all the different views but ill have a section for the wires to go through and ill will be taking out the Ac unit to see if I can route the wires because I don't know about you but I hate to cut anything if theirs another way lol will be done this afternoon

[lexusb3]

Originally Posted by King Tut

I at least glance at my failsafe the majority of times I accelerate. A quick glance down probably won't be an issue, but if you are trying to see your boost curve or make sure your AFR is good for an entire pull to 7400 RPM, then I wouldn't keep looking down, haha. Do your gauges datalog like the AEM Failsafe so you can review the data later? I am hoping to get my electronic boost controller screen mounted in that area.

I can fab any color of your choice lol yea that's just the standard gauge but mine will datalog

[Brody602]

Originally Posted by lexusb3

I will post more pictures for u of all the different views but ill have a section for the wires to go through and ill will be taking out the Ac unit to see if I can route the wires because I don't know about you but I hate to cut anything if theirs another way lol will be done this afternoon

Yes, I must agree that cutting drilling is a last resort option for me, especially on a new car, any idea on pricing?

[lexusb3]

Originally Posted by Brody602

Yes, I must agree that cutting drilling is a last resort option for me, especially on a new car, any idea on pricing?

Until I'm done and see how much material needed and the clamps I need to have access to removal and switch gauges I won't have a price and ill can't really say but I know it won't break budget because that was the point of me doing this lol

Ill have the final model done this weekend and go from their ill keep u updated

[Brody602]

Originally Posted by lexusb3

Until I'm done and see how much material needed and the clamps I need to have access to removal and switch gauges I won't have a price and ill can't really say but I know it won't break budget because that was the point of me doing this lol

Ill have the final model done this weekend and go from their ill keep u updated

Little off topic but would you be able to fab something like this to hold my google nexus 7? couple different ideas, I wouldn't want it to be a permanement mod, and not to interfere with the hvac controls if i remove my tablet?

[jamesm]

i just put a 60mm prosport boost gauge in my driver's side vent and it's pretty awesome. air still flows (enough, not as much as before though). line of sight is great and the install was super clean. i'd prefer to have the gauges above the stock dash as stated by someone else, but there's to way to do that without looking like a d-bag.

[Books]

Originally Posted by Brody602

Little off topic but would you be able to fab something like this to hold my google nexus 7? couple different ideas, I wouldn't want it to be a permanement mod, and not to interfere with the hvac controls if i remove my tablet?

I've been thinking about the same thing (but for my phone). I think i'm going to be printing one when I have some free time in the coming weeks.