Ugh - Possible taillight condensation

[rjuc]

Originally Posted by himynameisdevin

you do that torque sequence thing?

No, I wasn't aware. Thanks for bringing it up! Searched the forum and found what you were talking about.

http://www.ft86club.com/forums/showthread.php?t=28581

I'm actually gonna take it to a shop and have them take out the moisture and seal it. I'll mention the torque sequence to them.

[himynameisdevin]

Originally Posted by rjuc

No, I wasn't aware. Thanks for bringing it up! Searched the forum and found what you were talking about.

http://www.ft86club.com/forums/showthread.php?t=28581

I'm actually gonna take it to a shop and have them take out the moisture and seal it. I'll mention the torque sequence to them.

Mm good luck with the tails.
Yea I'm still really debating on having my friend spray them red. I don't wanna take them out lol.

[markmatley]

Originally Posted by rjuc

Help!!!

My passenger side tail light is having condensation issues and I can't stand it! These are the Crystal Eye lights I just got last week so I'm bummed. My stock tails never had moisture problems so I'm inclined to believe it's the tail light itself. The driver's side is fine.

Drilling is not an option. I've taken the tail light off, removed the bulbs from their sockets, and aired it out. Also used a blow dryer and tried using a vacuum but the excess water is staying put. Any tips would be appreciated. I'll even drive out to meet someone at their place if they could help me out

We can air them out and then stick them in the oven for a bit if you need all that moisture out. Bring em over! LOL!

[rjuc]

Originally Posted by himynameisdevin

Mm good luck with the tails.
Yea I'm still really debating on having my friend spray them red. I don't wanna take them out lol.

Thanks man. Do it! Just gotta hope for the best haha.

Originally Posted by markmatley

We can air them out and then stick them in the oven for a bit if you need all that moisture out. Bring em over! LOL!

Looks like all the moisture is out. Just had to be a little patient I guess lol. I was actually thinking about putting it in the oven but knowing me, I would screw it up I torqued it better this time, so we'll see if it comes back. Good so far since it rained today.

[markmatley]

Looks like all the moisture is out. Just had to be a little patient I guess lol. I was actually thinking about putting it in the oven but knowing me, I would screw it up I torqued it better this time, so we'll see if it comes back. Good so far since it rained today.[/QUOTE]

Nice work! Glad it worked out!