ALL ARIZONA FR-S/BRZ OWNERS HOME PAGE

[Jaknar]

Anyone know a good auto upholster in phx/tuc area?

Thanks
Jaknar

[Huehuecoyotl]

Originally Posted by Yruyur

Mook has done extensive testing and swears by pentosin for tranny fluid. He has a big thread on it.

Sent from my GT-P3113 using Tapatalk 2

well, you drove my car, hows my shifts?

[ichitaka05]

For the detail information goes. Can't say much, due to still tentative... We're currently getting official email & info from one of the dealer over there.

As for rough layout for those 2 days

June 14th:
AutoX at the Vegas Speedway (morning ~ afternoon) w few event there
Night meet (night)

June 15th
Meet & prep for cruise (morning)
Cruise (morning~ lil pass noon)
Back to the dealer for shows & awards
Night meet (night)

Again, it's still a tentative... but hope that help out some of planning.

If you have question, PM me & I'll try to answer much as I can

ichi

[Huehuecoyotl]

Originally Posted by ichitaka05

For the detail information goes. Can't say much, due to still tentative... We're currently getting official email & info from one of the dealer over there.

As for rough layout for those 2 days

June 14th:
AutoX at the Vegas Speedway (morning ~ afternoon) w few event there
Night meet (night)

June 15th
Meet & prep for cruise (morning)
Cruise (morning~ lil pass noon)
Back to the dealer for shows & awards
Night meet (night)

Again, it's still a tentative... but hope that help out some of planning.

If you have question, PM me & I'll try to answer much as I can

ichi

LV not that far from AZ and fun
I wanna come! where does one register @ichitaka05? let us know...

[jeffsides]

Originally Posted by ichitaka05

For the detail information goes. Can't say much, due to still tentative... We're currently getting official email & info from one of the dealer over there.

As for rough layout for those 2 days

June 14th:
AutoX at the Vegas Speedway (morning ~ afternoon) w few event there
Night meet (night)

June 15th
Meet & prep for cruise (morning)
Cruise (morning~ lil pass noon)
Back to the dealer for shows & awards
Night meet (night)

Again, it's still a tentative... but hope that help out some of planning.

If you have question, PM me & I'll try to answer much as I can

ichi

Can't wait. I plan on leaving the valley super erly in the morning on the 14th. And then get back late on the 15th and just staying 1 night in hotel. Excited!!!

[ichitaka05]

Originally Posted by Huehuecoyotl

LV not that far from AZ and fun
I wanna come! where does one register @ichitaka05? let us know...

Hopefully registration will start early to mid April. We're currently share this info to get much interest from members.

I'll make sure to update that thread whenever we can update, so stay tuned

[captain_jack]

Originally Posted by Jaknar

Anyone know a good auto upholster in phx/tuc area?

Thanks
Jaknar

Depends on what you need my guy can do anything, but isnt fast at all and is in tucson. Best work youll ever see though.

[jeffsides]

Vegas!!! That will be an awesome venue.

[Yruyur]

Originally Posted by Huehuecoyotl

well, you drove my car, hows my shifts?

Like butter. First and second are much better.

Sent from my SCH-I535 using Tapatalk 2

[SMOKETREES]

So looking into this.....

http://www.ground-control-store.com/...ion.php?II=938

What you think?

[captain_jack]

Originally Posted by SMOKETREES

So looking into this.....

http://www.ground-control-store.com/...ion.php?II=938

What you think?

I saw those and was curious as well.....

Sent from my SPH-L900 using Tapatalk 2

[SMOKETREES]

I think @Evil86 and Gem need to chim in... Now there are options also for rear shock mounts? Will I need these for the stock dampers till I purchase koni aftermarket shocks later down the road? And what is their aggressive spring rate? Mmmm

[AZFA20]

I also have a complete GroundControl coilover setup (everything they make). I have the aluminum rear mounts as well so if you guys have any specific questions I can assist. Also have the adjustable end links if there are any questions there. As far as spring rates it depends what you plan to do with your car. That's the beauty of GC is that you can get any spring rate you like. If you decide to use it for something different or simply want a different character just swap springs out. For example I chose 375lb fronts and 400lb rears but there are a bunch of reasons to choose specific springs. I have to account for my sway bars, tire size (staggered), alignment settings, driving style, plan of use. The term "aggressive" is really negligible but used for those who perhaps don't fully understand suspension characteristics.

[Evil86]

Ninjin, what is your screen on the solo forum?

Kevin