Nameless Performance Revised Offset Axle Back Exhaust

[TRD_07]

Unbelievable sound.

[Huehuecoyotl]

what does this cost?
includes overpipe?
sorry ifits been answred

[mad_sb]

Originally Posted by Huehuecoyotl

what does this cost?
includes overpipe?
sorry ifits been answred

They have so many options your best bet is to check out the website. They have combo's available with axle-back and front / over pipe combos.

[OrbitalEllipses]

Hm. We'll have to see if my 6" cuts it when I add the header.

[Grimlock]

In this thread I've seen references to new 4" and 8" mufflers on the Nameless exhaust. But on Nameless's site I only ssee no muffler, 4", and 5" designs.

http://shop.namelessperformance.com/...eback-exhaust/

[OrbitalEllipses]

Originally Posted by Grimlock

In this thread I've seen references to new 4" and 8" mufflers on the Nameless exhaust. But on Nameless's site I only ssee no muffler, 4", and 5" designs.

http://shop.namelessperformance.com/...eback-exhaust/

4" diameter vs. 5" diameter. 8" is the length.

[FR-S Matt]

Originally Posted by Grimlock

In this thread I've seen references to new 4" and 8" mufflers on the Nameless exhaust. But on Nameless's site I only ssee no muffler, 4", and 5" designs.

http://shop.namelessperformance.com/...eback-exhaust/

Did you read the descriptions at the bottom?

The 4" X 8" are the centered design. The 5" X 8" are the offset design.

The new design is the larger mufflers as the older ones were 6" long. The bends have also changed on the axleback.

[Grimlock]

Originally Posted by OrbitalEllipses

4" diameter vs. 5" diameter. 8" is the length.

Originally Posted by FR-S Matt

Did you read the descriptions at the bottom?

The 4" X 8" are the centered design. The 5" X 8" are the offset design.

The new design is the larger mufflers as the older ones were 6" long. The bends have also changed on the axleback.

Thanks for the clarification. With all these options with the Nameless and other exhausts it's hard to tell what I'd want.

[OrbitalEllipses]

Safe bet is 5"x8" offset.

[FR-S Matt]

Originally Posted by Grimlock

Thanks for the clarification. With all these options with the Nameless and other exhausts it's hard to tell what I'd want.

The offset is great if you plan on going with headers + downpipe.

The non-offset is great if you want loud, but only want to go as far as upgrading the downpipe.

Offset is a deep tone, while non offset is a more racey, non deep tone. Offset is quieter than Centered, but will be really loud when you step on it and upgrade the exhaust further.

Centered is already loud to begin with and according to Nameless, the muffler is 1" less in diameter. I have videos in the other thread for the Axleback of the 2.5" offset idle/rev.