Frs Fog Lights Finally!

[mdf4uk]

Originally Posted by outlaw121

I need help with where to wire the switch power side inside the car

Sent from my HTC VLE_U using Tapatalk 2

Me too can anyone help or answer this?

[outlaw121]

Are you using the harness from nigel Jdm? It's like super short I'm going to end up rewiring mine

Sent from my HTC VLE_U using Tapatalk 2

[mdf4uk]

Originally Posted by outlaw121

Are you using the harness from nigel Jdm? It's like super short I'm going to end up rewiring mine

Sent from my HTC VLE_U using Tapatalk 2

Yes, i extended the white wire and mounted the switch on bottom of the panel under the steering wheel facing the floor but i am looking for a power source for the red wire to the switch that only works with the key on so i don't drain the battery accidentally by leaving the fog light switch on. thinking about this for power http://www.ebay.com/itm/ATM-Mini-Fus...286#vi-content

[outlaw121]

Originally Posted by mdf4uk

Yes, i extended the white wire and mounted the switch on bottom of the panel under the steering wheel facing the floor but i am looking for a power source for the red wire to the switch that only works with the key on so i don't drain the battery accidentally by leaving the fog light switch on. thinking about this for power http://www.ebay.com/itm/ATM-Mini-Fus...286#vi-content

Do your lights work right now?

Sent from my HTC VLE_U using Tapatalk 2

[86 FRS]

Originally Posted by calis5nest

Where did you guys tap the positive switch wire to?

Originally Posted by outlaw121

I need help with where to wire the switch power side inside the car

Sent from my HTC VLE_U using Tapatalk 2

Originally Posted by mdf4uk

Me too can anyone help or answer this?

Igniton key or parking lights.

I'll take and post some pics this morning. sorry for the delay for the pics, its been busy week for me.

but before that u need this for safe and cleaner splicing

[outlaw121]

Originally Posted by 86 FRS

Igniton key or parking lights.

I'll take and post some pics this morning. sorry for the delay for the pics, its been busy week for me.

but before that u need this for safe and cleaner splicing

Thank you!

Sent from my HTC VLE_U using Tapatalk 2

[86 FRS]

Sorry for the delay guys. for those interested to tap their switch on ignition key.without draining the battery and u can turn on the fogs without turining on parking lights and headlights.

unplugged that white socket



remove the black cover insulator around these wires, and pull the green wire, with the splicing wire connector, connect the red wire from the switch to the green wire.

Note: U need to squeesh in very hard to get the perfect contact on the wire, coz the green wire has a thick insulator.



Then plugged it back in the white socket, then screw in here the ground wire



enjoy with ur working foglights lol. hope this help guys.

[calis5nest]

Thanks a lot for the pics! @86_FRS this is very helpful

[OmarGC]

Originally Posted by 86 FRS

but before that u need this for safe and cleaner splicing

These are crap... And if you're using a bunch of force to get through what you think is insulation, it's probably just damaging your wire.

I suggest http://www.backinblackgp.com/Tap_And_Splice.htm

[86 FRS]

Originally Posted by calis5nest

Thanks a lot for the pics! @86_FRS this is very helpful

No problem

[outlaw121]

Originally Posted by 86 FRS

Sorry for the delay guys. for those interested to tap their switch on ignition key.without draining the battery and u can turn on the fogs without turining on parking lights and headlights.

unplugged that white socket



remove the black cover insulator around these wires, and pull the green wire, with the splicing wire connector, connect the red wire from the switch to the green wire.

Note: U need to squeesh in very hard to get the perfect contact on the wire, coz the green wire has a thick insulator.



Then plugged it back in the white socket, then screw in here the ground wire



enjoy with ur working foglights lol. hope this help guys.

Thanks so much man they work now!!! just have to wait on beziels from nigel-jdm and im set!

[lbroskee]

Originally Posted by 86 FRS

Sorry for the delay guys. for those interested to tap their switch on ignition key.without draining the battery and u can turn on the fogs without turining on parking lights and headlights.

unplugged that white socket



remove the black cover insulator around these wires, and pull the green wire, with the splicing wire connector, connect the red wire from the switch to the green wire.

Note: U need to squeesh in very hard to get the perfect contact on the wire, coz the green wire has a thick insulator.



Then plugged it back in the white socket, then screw in here the ground wire



enjoy with ur working foglights lol. hope this help guys.

any idea if we can get the dash light on with this way too?

[calis5nest]

Originally Posted by lbroskee

any idea if we can get the dash light on with this way too?

I might be wrong but I think the only way to get that is by getting stalk

[*KID*]

Here's mine on BRZ fogs... so much better than the outback fogs IMO